fixes link issue point

docs/accountmanagement/Contracts-Wallets.html.md

@@ -20,7 +20,7 @@ You can check your billing by clicking **Billing report** button.
 
 This is a postpaid billing mode where Tenants are invoiced periodically based on actual usage. In this mode, a Tenant signs a written contract and is billed usually on monthly bases for actual usage of services and resources. PAYG contracts are purchased only through our sales department in a form of written contracts. With the exception of FIXED-TERM orders all services and resources ordered under Accounts/Projects that are attached to the PAYG contract will be added to the invoice issued at the end of agreed period. Billing is done every 2 hours. Tenants sees the increase in usage with the cost of used resources billed with an accuracy of up to 2 seconds.
 
-To add PAYG wallet you need to raise a ticket first (please check [Helpdesk and Support](Help-Desk-And-Support.html)).
+To add PAYG wallet you need to raise a ticket first (please check [Helpdesk and Support](Help-Desk-And-Support.html.md)).
 
 **FIXED-TERM (Fixed Term Contract)**
 

docs/accountmanagement/Cookie-consent-on-CloudFerro-Cloud.html.md

@@ -136,7 +136,7 @@ The cookie is saved on backend servers for 12 months. It is also saved in your b
 Troubleshooting[](#troubleshooting "Permalink to this headline")
 -----------------------------------------------------------------
 
-You can see the contents of the cookie file through various browser options and also through a file viewer on your desktop computer. It is quite possible (but not at all advisable) to delete the cookie file outside of the browser. In particular, deleting the entire cookie by force will also delete the **necessary** part of the cookie. You may, then, lose access to the site, be forced to contact [Helpdesk and Support](Help-Desk-And-Support.html) and so on.
+You can see the contents of the cookie file through various browser options and also through a file viewer on your desktop computer. It is quite possible (but not at all advisable) to delete the cookie file outside of the browser. In particular, deleting the entire cookie by force will also delete the **necessary** part of the cookie. You may, then, lose access to the site, be forced to contact [Helpdesk and Support](Help-Desk-And-Support.html.md) and so on.
 
 Setting up cookies on CloudFerro Cloud subdomains[](#setting-up-cookies-on-brand-name-subdomains "Permalink to this headline")
 -------------------------------------------------------------------------------------------------------------------------------

docs/accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md

@@ -34,21 +34,21 @@ No. 2 **2FA**
 
 If your account has 2FA enabled (which you will recognize from the respective prompt when authenticating), you need to install and configure a piece of software which generates six-digit codes used for 2FA. To set that up, follow one of these articles, depending on the type of device you are using:
 
-* Mobile device (Android, iOS): [Two-Factor Authentication to CloudFerro Cloud site using mobile application](Two-Factor-Authentication-for-CloudFerro-Cloud-Site.html)
+* Mobile device (Android, iOS): [Two-Factor Authentication to CloudFerro Cloud site using mobile application](Two-Factor-Authentication-for-CloudFerro-Cloud-Site.html.md)
-* Computer [Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop](Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html)
+* Computer [Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop](Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html.md)
 
 No. 3 **OpenStackClient installed and available**
 
 Installing OpenStackClient on various platforms will also install the ability to run the **.sh** files. Since OpenStack is written in Python, it is recommended to use a dedicated virtual environment for the rest of this article.
 
 Install GitBash on Windows
-:   Run **.sh** files and install OpenStackClient from a GitBash window under Windows. [How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html).
+:   Run **.sh** files and install OpenStackClient from a GitBash window under Windows. [How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html.md).
 
 Install and run WSL (Linux under Windows)
-:   Run **.sh** files and install OpenStackClient from a Ubuntu window under Windows. [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](../openstackcli/How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html).
+:   Run **.sh** files and install OpenStackClient from a Ubuntu window under Windows. [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](../openstackcli/How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html.md).
 
 Install OpenStackClient on Linux
-:   [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html).
+:   [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md).
 
 How to download the RC file[](#how-to-download-the-rc-file "Permalink to this headline")
 -----------------------------------------------------------------------------------------
@@ -228,7 +228,7 @@ Call to Keycloak failed with code 000 and message
 
 It will be followed by an empty line and you will be returned to your command prompt.
 
-To resolve this issue, please connect to the Internet and try to activate the RC file again. If you are certain that you have Internet connection, it could mean that CloudFerro Cloud account service is down. If no downtime was announced for it, please contact CloudFerro Cloud customer support: [Helpdesk and Support](Help-Desk-And-Support.html)
+To resolve this issue, please connect to the Internet and try to activate the RC file again. If you are certain that you have Internet connection, it could mean that CloudFerro Cloud account service is down. If no downtime was announced for it, please contact CloudFerro Cloud customer support: [Helpdesk and Support](Help-Desk-And-Support.html.md)
 
 ### Non-2FA accounts: entering a wrong password[](#non-2fa-accounts-entering-a-wrong-password "Permalink to this headline")
 
@@ -268,8 +268,8 @@ and, in general, use all OpenStack CLI commands.
 
 For example, if you want to create a new virtual machine, you can follow this article:
 
-[How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html)
+[How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html.md)
 
 If you want your new virtual machine to be based on an image which is not available on CloudFerro Cloud cloud, you will need to upload it. The following article contains instructions how to do it:
 
-[How to upload your custom image using OpenStack CLI on CloudFerro Cloud](../cloud/How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html)
+[How to upload your custom image using OpenStack CLI on CloudFerro Cloud](../cloud/How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)

docs/accountmanagement/How-to-buy-credits-using-pay-per-use-wallet-on-CloudFerro-Cloud.html.md

@@ -29,7 +29,7 @@ You are going to pay with the data you enter for the organization. Be sure that
 
 No. 3 **Useful articles**
 
-As explained in [Wallets and Contracts Management](Contracts-Wallets.html), there are **three ways of paying for the services** on CloudFerro Cloud platform:
+As explained in [Wallets and Contracts Management](Contracts-Wallets.html.md), there are **three ways of paying for the services** on CloudFerro Cloud platform:
 
 PPUSE (Pay Per Use Wallet)
 :   Billing according to the usage.
@@ -40,7 +40,7 @@ PAYG (Pay As You Go Contract)
 FIXED-TERM (Fixed Term Contract)
 :   Billing mode where services are bought for longer periods
 
-In case you have not entered **organization** data yet, see article [Adding and editing Organization](Adding-Editing-Organizations.html)
+In case you have not entered **organization** data yet, see article [Adding and editing Organization](Adding-Editing-Organizations.html.md)
 
 Step 1 Check for the correct tax ID or VAT number[](#step-1-check-for-the-correct-tax-id-or-vat-number "Permalink to this headline")
 -------------------------------------------------------------------------------------------------------------------------------------

docs/accountmanagement/How-to-start-using-dashboard-services-on-CloudFerro-Cloud.html.md

@@ -14,7 +14,7 @@ The option to use is **Configuration** -> **Organization**.
 
 ![dashboard-services-4-cloudferro-cloud.png](../_images/dashboard-services-4-cloudferro-cloud.png)
 
-See article [Adding and editing Organization](Adding-Editing-Organizations.html).
+See article [Adding and editing Organization](Adding-Editing-Organizations.html.md).
 
 Step 2 Enable payment options[](#step-2-enable-payment-options "Permalink to this headline")
 ---------------------------------------------------------------------------------------------
@@ -23,7 +23,7 @@ Go to the [eCommerce site](https://ecommerce.cloudferro.com/) and top up your wa
 
 ![dashboard-services-3-cloudferro-cloud.png](../_images/dashboard-services-3-cloudferro-cloud.png)
 
-See article [How to buy credits using Pay Per Use wallet on CloudFerro Cloud](How-to-buy-credits-using-pay-per-use-wallet-on-CloudFerro-Cloud.html).
+See article [How to buy credits using Pay Per Use wallet on CloudFerro Cloud](How-to-buy-credits-using-pay-per-use-wallet-on-CloudFerro-Cloud.html.md).
 
 Step 3 Activate the project[](#step-3-activate-the-project "Permalink to this headline")
 -----------------------------------------------------------------------------------------

docs/accountmanagement/Inviting-New-User.html.md

@@ -24,4 +24,4 @@ Go to the **Invitations** tab and choose an invitation that you want to accept o
 
 ![inv_02_cloudferrocloud.png](../_images/inv_02_cloudferrocloud.png)
 
-After accepting the invitation you will be able to add/edit roles. For more details please check [Tenant manager users and roles on CloudFerro Cloud](Tenant-Manager-Users-And-Roles-On-CloudFerro-Cloud.html).
+After accepting the invitation you will be able to add/edit roles. For more details please check [Tenant manager users and roles on CloudFerro Cloud](Tenant-Manager-Users-And-Roles-On-CloudFerro-Cloud.html.md).

docs/accountmanagement/Registration-And-Account.html.md

@@ -19,10 +19,10 @@ For general information about types of account and user roles you may have in Da
 
 After creating personal account you can either create new company account or join an existing account. See articles:
 
-[Adding and editing Organization](Adding-Editing-Organizations.html)
+[Adding and editing Organization](Adding-Editing-Organizations.html.md)
 
-[Inviting new user to your Organization](Inviting-New-User.html)
+[Inviting new user to your Organization](Inviting-New-User.html.md)
 
 If you are a single user you can only access a limited number of services.
 
-See article [How to start using dashboard services on CloudFerro Cloud](How-to-start-using-dashboard-services-on-CloudFerro-Cloud.html)
+See article [How to start using dashboard services on CloudFerro Cloud](How-to-start-using-dashboard-services-on-CloudFerro-Cloud.html.md)

docs/accountmanagement/Tenant-Manager-Users-And-Roles-On-CloudFerro-Cloud.html.md

@@ -65,8 +65,8 @@ To add a **member+** user to the project, follow these steps:
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-The article [Inviting new user to your Organization](Inviting-New-User.html) shows how to invite a new user.
+The article [Inviting new user to your Organization](Inviting-New-User.html.md) shows how to invite a new user.
 
-To the contrary, article [Removing user from Organization](Removing-User-From-Organization.html) shows how to remove a user from the organization.
+To the contrary, article [Removing user from Organization](Removing-User-From-Organization.html.md) shows how to remove a user from the organization.
 
 The article /accountmanagement/Accounts-and-Projects-Management is a general guidance to creating and managing accounts and projects on CloudFerro Cloud.

docs/accountmanagement/Two-Factor-Authentication-for-CloudFerro-Cloud-Site.html.md

@@ -18,7 +18,7 @@ Logging into the CloudFerro Cloud site uses two-factor authentication, meaning y
 > * the “classical” username and password, as well as
 > * the numeric code supplied by a concrete mobile app.
 
-This article is about using mobile devices to authenticate to the cloud. If you want to use your computer to do that, see [Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop](Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html).
+This article is about using mobile devices to authenticate to the cloud. If you want to use your computer to do that, see [Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop](Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html.md).
 
 You will first have to install one of the following two mobile applications, for Android or iOS mobile operating systems:
 
@@ -202,8 +202,8 @@ If the FreeOTP app is in the foreground on the mobile device while you are submi
 
 ### What To Do Next[](#what-to-do-next "Permalink to this headline")
 
-As mentioned in the beginning, you can use your computer for two-factor authentication – see article [Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop](Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html).
+As mentioned in the beginning, you can use your computer for two-factor authentication – see article [Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop](Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html.md).
 
-Either using mobile device or computer to authenticate, you will be logged into Horizon. You will then need to activate access to CloudFerro Cloud cloud API functions and be able to run **openstack** command. Please see article [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html).
+Either using mobile device or computer to authenticate, you will be logged into Horizon. You will then need to activate access to CloudFerro Cloud cloud API functions and be able to run **openstack** command. Please see article [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md).
 
-To learn how to manage your TOTP secret key, visit the following article: [How to manage TOTP authentication on CloudFerro Cloud](How-to-manage-TOTP-authentication-on-CloudFerro-Cloud.html) - it can be useful if you, for instance, want to use a different method of authentication, are unable to extract your secret key from currently used piece of software such as FreeOTP and do not have your secret key backed up in a readable way.
+To learn how to manage your TOTP secret key, visit the following article: [How to manage TOTP authentication on CloudFerro Cloud](How-to-manage-TOTP-authentication-on-CloudFerro-Cloud.html.md) - it can be useful if you, for instance, want to use a different method of authentication, are unable to extract your secret key from currently used piece of software such as FreeOTP and do not have your secret key backed up in a readable way.

docs/accountmanagement/Using-KeePassXC-for-Two-Factor-Authentication-on-CloudFerro-Cloud.html.md

@@ -1,7 +1,7 @@
 Two-Factor Authentication to CloudFerro Cloud site using KeePassXC on desktop[](#two-factor-authentication-to-brand-name-site-using-keepassxc-on-desktop "Permalink to this headline")
 =======================================================================================================================================================================================
 
-Please see article [Two-Factor Authentication to CloudFerro Cloud site using mobile application](Two-Factor-Authentication-for-CloudFerro-Cloud-Site.html) if you want to use a smartphone app for the TOTP two-factor authentication.
+Please see article [Two-Factor Authentication to CloudFerro Cloud site using mobile application](Two-Factor-Authentication-for-CloudFerro-Cloud-Site.html.md) if you want to use a smartphone app for the TOTP two-factor authentication.
 
 If you, however, want to use your desktop or laptop computer instead, KeePassXC is probably a good choice for you. It is a free and open source graphical password manager. It stores passwords, TOTP keys and other secrets in a file on your computer. You can later, for example, move that file manually to a different computer to use that device instead of the current one.
 

docs/cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html.md

@@ -53,7 +53,7 @@ We assume you already have a
 > * basic knowledge of Domain Name Service principles as well as
 > * understanding of the purpose of DNS records.
 
-If not, please see [DNS article on Wikipedia](https://en.wikipedia.org/wiki/Domain_Name_System) or [OpenStack DNSaaS command line reference](https://docs.openstack.org/python-designateclient/latest/user/shell-v2.html)
+If not, please see [DNS article on Wikipedia](https://en.wikipedia.org/wiki/Domain_Name_System) or [OpenStack DNSaaS command line reference](https://docs.openstack.org/python-designateclient/latest/user/shell-v2.html.md)
 
 No. 4 **Must have domain purchased from a registrar**
 
@@ -63,11 +63,11 @@ No. 5 **Must have a Linux server with an assigned IP address**
 
 To verify DNS creation and propagation, you shall use the **dig** command from Linux. You will also need an IP address to point the domain name to. You may have already created one such VM in your CloudFerro Cloud server and if not, here is how to create a virtual machine, assign a floating IP to it and access it from Windows desktop computer:
 
-[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md)
 
 Or, you might connect from a Linux based computer to the cloud:
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
 
 In both cases, the article will contain a section to connect floating IP to the newly created VM. The generated IP address will vary, but for the sake of concreteness we shall assume that it is **64.225.133.254**. You will enter that value later in this article, to create record set for the site or service you are making.
 
@@ -251,7 +251,7 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 Once an OpenStack object has floating IP address, you can use the DNS service to propagate a domain name and, thus, create a service or a site. There are several situations in which you can create a floating IP address:
 
 You already have an existing VM
-:   Follow the procedure in article [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html) to assign a new floating IP to it.
+:   Follow the procedure in article [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md) to assign a new floating IP to it.
 
 Assign floating IP while creating a new VM from scratch
 :   That is the approach in articles from Prerequisite No. 5.
@@ -259,4 +259,4 @@ Assign floating IP while creating a new VM from scratch
 **Kubernetes services can have an automatically assigned floating IP**
 :   The following article shows how to deploy an HTTPS service on Kubernetes:
 
-[Deploying HTTPS Services on Magnum Kubernetes in CloudFerro Cloud Cloud](../kubernetes/Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html)
+[Deploying HTTPS Services on Magnum Kubernetes in CloudFerro Cloud Cloud](../kubernetes/Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html.md)

docs/cloud/How-To-Create-a-New-Linux-VM-With-NVIDIA-Virtual-GPU-in-the-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md

@@ -88,7 +88,7 @@ Open “Security Groups” After that, choose “allow\_ping\_ssh\_icmp\_rdp”
 
 ![createnew6.png](../_images/createnew6.png)
 
-Choose or generate SSH keypair, as explained in article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html) for your VM. Next, launch your instance by clicking on blue button.
+Choose or generate SSH keypair, as explained in article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md) for your VM. Next, launch your instance by clicking on blue button.
 
 ![createnew7.png](../_images/createnew7.png)
 
@@ -98,7 +98,7 @@ You will see “Instances” menu with your newly created VM.
 
 Note
 
-If you want to make your VM accessible from the Internet, see this article: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html)
+If you want to make your VM accessible from the Internet, see this article: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md)
 
 Step 4 Issue Commands from the Console[](#step-4-issue-commands-from-the-console "Permalink to this headline")
 ---------------------------------------------------------------------------------------------------------------
@@ -107,7 +107,7 @@ Open the drop-down menu and choose “Console”.
 
 ![createnew9.png](../_images/createnew9.png)
 
-You can connect to your virtual machine using SSH, see this article: [How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html)
+You can connect to your virtual machine using SSH, see this article: [How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md)
 
 You can also use the SPICE console using the Openstack Dashboard.
 

docs/cloud/How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html.md

@@ -96,11 +96,11 @@ where *vault* is the namespace within which the pod *vault-0* will be found and
 
 Further explanations of **exec** command are out of scope of this article. The following article will show you how to activate the **kubectl** command after the cluster has been created:
 
-[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 This article shows an example of an **exec** command to enter the VM and, later, save the data within it:
 
-[Volume-based vs Ephemeral-based Storage for Kubernetes Clusters on CloudFerro Cloud OpenStack Magnum](../kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-CloudFerro-Cloud-OpenStack-Magnum.html)
+[Volume-based vs Ephemeral-based Storage for Kubernetes Clusters on CloudFerro Cloud OpenStack Magnum](../kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 ### Performing administrative tasks within Windows based VMs[](#performing-administrative-tasks-within-windows-based-vms "Permalink to this headline")
 

docs/cloud/How-to-clone-existing-and-configured-VMs-on-CloudFerro-Cloud.html.md

@@ -22,7 +22,7 @@ Once the snapshot is ready, you may see it on **“Images”** page of Horizon.
 
 Now, you may click **“Launch”** in right upper corner of the window or just go back to **“Instances”** menu and launch new instance.
 
-Full manual is here: [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html)
+Full manual is here: [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md)
 
 But if this process is familiar to you, there is only one difference. Chose as the source **“boot from snapshot”** instead of **“boot from image”** and select your snapshot from the list below. In next steps select parameters (flavour, size), at least the same as the original one. (“Launch instance” button will be unavailable until all necessary settings were completed).
 
@@ -32,4 +32,4 @@ Caution
 
 If the original machine had any additional volumes attached to it, they should also be cloned.
 
-You may also want to read: [Volume snapshot inheritance and its consequences on CloudFerro Cloud](../datavolume/Volume-snapshot-inheritance-and-its-consequences-on-CloudFerro-Cloud.html).
+You may also want to read: [Volume snapshot inheritance and its consequences on CloudFerro Cloud](../datavolume/Volume-snapshot-inheritance-and-its-consequences-on-CloudFerro-Cloud.html.md).

docs/cloud/How-to-create-Windows-VM-on-OpenStack-Horizon-and-access-it-via-web-console-on-CloudFerro-Cloud.html.md

@@ -214,6 +214,6 @@ Follow the appropriate prompts to update your operating system.
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-If you want to access your virtual machine remotely using RDP (Remote Desktop Protocol), you should consider increasing its security by using a bastion host. The following article contains more information: [Connecting to a Windows VM via RDP through a Linux bastion host port forwarding on CloudFerro Cloud](../windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-CloudFerro-Cloud.html)
+If you want to access your virtual machine remotely using RDP (Remote Desktop Protocol), you should consider increasing its security by using a bastion host. The following article contains more information: [Connecting to a Windows VM via RDP through a Linux bastion host port forwarding on CloudFerro Cloud](../windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-CloudFerro-Cloud.html.md)
 
-To learn more about security groups, you can check this article: [How to use Security Groups in Horizon on CloudFerro Cloud](How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html)
+To learn more about security groups, you can check this article: [How to use Security Groups in Horizon on CloudFerro Cloud](How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html.md)

docs/cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md

@@ -3,7 +3,7 @@ How to create a Linux VM and access it from Linux command line on CloudFerro Clo
 
 Creating a virtual machine in a CloudFerro Cloud cloud allows you to perform computations without having to engage your own infrastructure. In this article you shall create a Linux based virtual machine and access it remotely from a Linux command line on a desktop or laptop.
 
-If you want to access Linux VM from a Windows based command line, follow this article instead: [How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html).
+If you want to access Linux VM from a Windows based command line, follow this article instead: [How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md).
 
 Note
 
@@ -48,13 +48,13 @@ A Linux distribution running on your computer. This article was written for Ubun
 
 No. 4 **SSH client installed and configured on your local Linux computer**
 
-The SSH client must be installed and configured on your local Linux computer. Please see [Generating an SSH keypair in Linux on CloudFerro Cloud](../networking/Generating-a-SSH-keypair-in-Linux-on-CloudFerro-Cloud.html).
+The SSH client must be installed and configured on your local Linux computer. Please see [Generating an SSH keypair in Linux on CloudFerro Cloud](../networking/Generating-a-SSH-keypair-in-Linux-on-CloudFerro-Cloud.html.md).
 
-If you already have an SSH key pair and an SSH client configured, you should import your public key to the Horizon dashboard. The following article contains information how to do it: [How to import SSH public key to OpenStack Horizon on CloudFerro Cloud](../networking/How-to-Import-SSH-Public-Key-to-OpenStack-Horizon-on-CloudFerro-Cloud.html).
+If you already have an SSH key pair and an SSH client configured, you should import your public key to the Horizon dashboard. The following article contains information how to do it: [How to import SSH public key to OpenStack Horizon on CloudFerro Cloud](../networking/How-to-Import-SSH-Public-Key-to-OpenStack-Horizon-on-CloudFerro-Cloud.html.md).
 
 Alternatively, you can also create a key pair directly in the Horizon:
 
-[How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html).
+[How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md).
 
 Options for creation of a Virtual Machine (VM)[](#options-for-creation-of-a-virtual-machine-vm "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------------------
@@ -130,7 +130,7 @@ To solve this issue, choose a flavor that supports your chosen source instead. I
 Another possible explanation might be that your quota is too low for creating a VM with your chosen flavor. You can see your quota in the **Compute -> Overview** section of your Horizon dashboard. If that is the case, you can either:
 
 * choose a different flavor or
-* contact the CloudFerro Cloud Support to request quota increase - [Helpdesk and Support](../accountmanagement/Help-Desk-And-Support.html).
+* contact the CloudFerro Cloud Support to request quota increase - [Helpdesk and Support](../accountmanagement/Help-Desk-And-Support.html.md).
 
 Click **Next** or click **Networks** to define networks.
 
@@ -208,7 +208,7 @@ Just like on the above screenshot, under header **IP Address**, you will see net
 Step 8 Attach a Floating IP to the instance[](#step-8-attach-a-floating-ip-to-the-instance "Permalink to this headline")
 -------------------------------------------------------------------------------------------------------------------------
 
-Here is how to create and attach a floating IP to your instance: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html).
+Here is how to create and attach a floating IP to your instance: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md).
 
 Once you have added the floating IP, you will see it in the Horizon dashboard under header **IP Address** - just like in the last image from that article:
 
@@ -219,7 +219,7 @@ The floating IP address in that article is **64.225.132.0**. Your address will v
 Step 9 Connecting to your virtual machine using SSH[](#step-9-connecting-to-your-virtual-machine-using-ssh "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------------------------------
 
-The following article has information about connecting to a virtual machine using SSH: [How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html).
+The following article has information about connecting to a virtual machine using SSH: [How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md).
 
 The last command in that article was:
 
@@ -242,20 +242,20 @@ CloudFerro Cloud cloud can be used for general hosting needs, such as
 
 To create a *cluster* of instances, see the series of articles on Kubernetes:
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](../kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](../kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 If you find yourself unable to connect to your virtual machine using SSH, you can use the web console for troubleshooting and other purposes. Here’s how to do it:
 
-[How to access the VM from OpenStack console on CloudFerro Cloud](How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html)
+[How to access the VM from OpenStack console on CloudFerro Cloud](How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html.md)
 
 If you don’t want the storage of your instance to be deleted while the VM is removed, you can choose to use a volume during instance creation. Please see the following articles:
 
-[VM created with option Create New Volume No on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html)
+[VM created with option Create New Volume No on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html.md)
 
-[VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html).
+[VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html.md).
 
 You can’t apply the SSH keys uploaded to the Horizon dashboard directly to a VM after its creation. The following article presents a walkaround to this problem:
 
-[How to add SSH key from Horizon web console on CloudFerro Cloud](../networking/How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html).
+[How to add SSH key from Horizon web console on CloudFerro Cloud](../networking/How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html.md).
 
-If you find that the storage of your VM is insufficient for your needs, you can attach the volume to it after its creation. The following articles contain appropriate instructions: [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html) and [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html).
+If you find that the storage of your VM is insufficient for your needs, you can attach the volume to it after its creation. The following articles contain appropriate instructions: [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md) and [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md).

docs/cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md

@@ -3,7 +3,7 @@ How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud[
 
 Creating a virtual machine in a CloudFerro Cloud cloud allows you to perform computations without having to engage your own infrastructure. In this article you shall create a Linux based virtual machine and access it remotely using PuTTY on Windows.
 
-If you want to access Linux VM from a Linux command line, follow this article instead: [How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html).
+If you want to access Linux VM from a Linux command line, follow this article instead: [How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md).
 
 Note
 
@@ -60,9 +60,9 @@ No. 5 **SSH key**
 
 You need to have an SSH key pair. It consists of a public and private key. You can use your existing pair in this workflow or create a new one. If you do not have one, you have several options, such as:
 
-* Generate them directly using the Horizon dashboard: [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html).
+* Generate them directly using the Horizon dashboard: [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md).
 
-* Generate your key pair using the Windows command line. Please check this article: [How to Create SSH Key Pair in Windows 10 On CloudFerro Cloud](../windows/How-To-Create-SSH-Key-Pair-In-Windows-On-CloudFerro-Cloud.html). If you choose that option, make sure that you upload your public key to the Horizon dashboard: [How to import SSH public key to OpenStack Horizon on CloudFerro Cloud](../networking/How-to-Import-SSH-Public-Key-to-OpenStack-Horizon-on-CloudFerro-Cloud.html).
+* Generate your key pair using the Windows command line. Please check this article: [How to Create SSH Key Pair in Windows 10 On CloudFerro Cloud](../windows/How-To-Create-SSH-Key-Pair-In-Windows-On-CloudFerro-Cloud.html.md). If you choose that option, make sure that you upload your public key to the Horizon dashboard: [How to import SSH public key to OpenStack Horizon on CloudFerro Cloud](../networking/How-to-Import-SSH-Public-Key-to-OpenStack-Horizon-on-CloudFerro-Cloud.html.md).
 
 This article contains information about configuring PuTTY using one such key pair.
 
@@ -142,7 +142,7 @@ To solve this issue, choose a flavor that supports your chosen source instead. I
 Another possible cause might be that your quota is too low for creating a VM with your chosen flavor. You can see your quota in the **Compute -> Overview** section of your Horizon dashboard. If that is the case, you can either:
 
 * choose a different flavor or
-* contact the CloudFerro Cloud Support to request quota increase - [Helpdesk and Support](../accountmanagement/Help-Desk-And-Support.html).
+* contact the CloudFerro Cloud Support to request quota increase - [Helpdesk and Support](../accountmanagement/Help-Desk-And-Support.html.md).
 
 Click **Next** or click **Networks** to define networks.
 
@@ -223,7 +223,7 @@ Just like on the above screenshot, under header **IP Address**, you will see net
 Step 8 Attach a Floating IP to the instance[](#step-8-attach-a-floating-ip-to-the-instance "Permalink to this headline")
 -------------------------------------------------------------------------------------------------------------------------
 
-Here is how to create and attach a floating IP to your instance: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html).
+Here is how to create and attach a floating IP to your instance: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md).
 
 Once you have added the floating IP, you will see it in the Horizon dashboard under header **IP Address** - just like in the last image from that article:
 
@@ -354,20 +354,20 @@ CloudFerro Cloud cloud can be used for general hosting needs, such as
 
 To create a *cluster* of instances, see the series of articles on Kubernetes:
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](../kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](../kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 If you find yourself unable to connect to your virtual machine using SSH, you can use the web console for troubleshooting and other purposes. Here’s how to do it:
 
-[How to access the VM from OpenStack console on CloudFerro Cloud](How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html)
+[How to access the VM from OpenStack console on CloudFerro Cloud](How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html.md)
 
 If you don’t want the storage of your instance to be deleted while the VM is removed, you can choose to use a volume during instance creation. Please see the following articles:
 
-[VM created with option Create New Volume No on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html)
+[VM created with option Create New Volume No on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html.md)
 
-[VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html).
+[VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html.md).
 
 You can’t apply the SSH keys uploaded to the Horizon dashboard directly to a VM after its creation. The following article presents a walkaround to this problem:
 
-[How to add SSH key from Horizon web console on CloudFerro Cloud](../networking/How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html).
+[How to add SSH key from Horizon web console on CloudFerro Cloud](../networking/How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html.md).
 
-If you find that the storage of your VM is insufficient for your needs, you can attach the volume to it after its creation. The following articles contain appropriate instructions: [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html) and [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html).
+If you find that the storage of your VM is insufficient for your needs, you can attach the volume to it after its creation. The following articles contain appropriate instructions: [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md) and [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](../datavolume/How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md).

docs/cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html.md

@@ -28,7 +28,7 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **OpenStack CLI client configured**
 
-To have the OpenStack CLI client configured and operational, see article: [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html).
+To have the OpenStack CLI client configured and operational, see article: [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md).
 
 If the command
 
@@ -61,7 +61,7 @@ Images uploaded within your account
 
     See this article
 
-    [How to upload your custom image using OpenStack CLI on CloudFerro Cloud](How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html)
+    [How to upload your custom image using OpenStack CLI on CloudFerro Cloud](How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
 
     for an example of uploading a new Debian image to the cloud.
 

docs/cloud/How-to-create-instance-snapshot-using-Horizon-on-CloudFerro-Cloud.html.md

@@ -53,7 +53,7 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Ephemeral storage vs. persistent storage**
 
-Please see article [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](../datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html) to understand the basic difference between ephemeral and persistent types of storage in OpenStack.
+Please see article [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](../datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html.md) to understand the basic difference between ephemeral and persistent types of storage in OpenStack.
 
 No. 3 **Instance with ephemeral storage**
 

docs/cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md

@@ -30,8 +30,8 @@ Click key name in **Key Pairs** menu and read your **public key**. You can also
 
 * To connect via SSH to your Virtual Machine using Linux, follow the steps in this FAQ:
 
-[How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html)
+[How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md)
 
 * To connect via SSH to your Virtual Machine using Windows (Command Prompt), follow the steps in this FAQ:
 
-[How to connect to a virtual machine via SSH from Windows 10 Command Prompt on CloudFerro Cloud](../windows/How-to-connect-to-a-virtual-machine-via-SSH-from-Windows-10-Command-Prompt-on-CloudFerro-Cloud.html)
+[How to connect to a virtual machine via SSH from Windows 10 Command Prompt on CloudFerro Cloud](../windows/How-to-connect-to-a-virtual-machine-via-SSH-from-Windows-10-Command-Prompt-on-CloudFerro-Cloud.html.md)

docs/cloud/How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md

@@ -31,7 +31,7 @@ Open **“Security Groups”** After that, choose “default” and “allow\_pi
 
 ![newvm6.png](../_images/newvm6.png)
 
-Choose or generate SSH keypair [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html) for your VM. Next, launch your instance by clicking on blue button.
+Choose or generate SSH keypair [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md) for your VM. Next, launch your instance by clicking on blue button.
 
 ![newvm7.png](../_images/newvm7.png)
 
@@ -61,4 +61,4 @@ After you finish, type “exit”.
 
 This will close the session.
 
-If you want to make your VM accessible from the Internet check [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html).
+If you want to make your VM accessible from the Internet check [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md).

docs/cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md

@@ -14,20 +14,20 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Authenticate**
 
-Once you have installed this piece of software, you need to authenticate to start using it: [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html)
+Once you have installed this piece of software, you need to authenticate to start using it: [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md)
 
 No. 3 **OpenStackClient installed and available**
 
 OpenStack is written in Python, it is recommended to use a dedicated virtual environment for the rest of this article.
 
 Install GitBash on Windows
-:   [How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html).
+:   [How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html.md).
 
 Install and run WSL (Linux under Windows)
-:   [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](../openstackcli/How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html).
+:   [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](../openstackcli/How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html.md).
 
 Install OpenStackClient on Linux
-:   [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html).
+:   [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md).
 
 No. 4 **jq installed and running**
 
@@ -299,8 +299,8 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 Here are some articles that use application credentials:
 
-[How to install Rancher RKE2 Kubernetes on CloudFerro Cloud](../kubernetes/How-to-install-Rancher-RKE2-Kubernetes-on-CloudFerro-Cloud-cloud.html)
+[How to install Rancher RKE2 Kubernetes on CloudFerro Cloud](../kubernetes/How-to-install-Rancher-RKE2-Kubernetes-on-CloudFerro-Cloud-cloud.html.md)
 
-[Configuring IP Whitelisting for OpenStack Load Balancer using Terraform on CloudFerro Cloud](../kubernetes/Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html)
+[Configuring IP Whitelisting for OpenStack Load Balancer using Terraform on CloudFerro Cloud](../kubernetes/Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html.md)
 
-[OpenStack User Roles on CloudFerro Cloud](OpenStack-user-roles-on-CloudFerro-Cloud.html)
+[OpenStack User Roles on CloudFerro Cloud](OpenStack-user-roles-on-CloudFerro-Cloud.html.md)

docs/cloud/How-to-start-a-VM-from-a-snapshot-on-CloudFerro-Cloud.html.md

@@ -32,7 +32,7 @@ a) Volume Snapshot[](#a-volume-snapshot "Permalink to this headline")
 
 ![snap7.png](../_images/snap7.png)
 
-8. The rest of procedure is the same: [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html).
+8. The rest of procedure is the same: [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md).
 
 9. Newly created machine is visible in the Instances list.
 
@@ -66,7 +66,7 @@ In the “Images” you may also find symbolic links to the volume snapshots.(i.
 
 ![snap5.png](../_images/snap5.png)
 
-6. The rest of procedure is the same: [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html).
+6. The rest of procedure is the same: [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md).
 
 7. Virtual machine has been created.
 

docs/cloud/How-to-start-a-VM-from-instance-snapshot-using-Horizon-dashboard-on-CloudFerro-Cloud.html.md

@@ -12,7 +12,7 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Ephemeral storage vs. persistent storage**
 
-Please see article [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](../datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html) to understand the basic difference between ephemeral and persistent types of storage in OpenStack.
+Please see article [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](../datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html.md) to understand the basic difference between ephemeral and persistent types of storage in OpenStack.
 
 No. 3 **Instance snapshot**
 

docs/cloud/How-to-transfer-volumes-between-domains-and-projects-using-Horizon-dashboard-on-CloudFerro-Cloud.html.md

@@ -33,7 +33,7 @@ You can check the status of your volume in the **Volumes -> Volumes** section of
 
 ![transfer-volume-between-projects-horizon-32_creodias.png](../_images/transfer-volume-between-projects-horizon-32_creodias.png)
 
-The following article includes information how to disconnect a volume from a virtual machine: [How to move data volume between two VMs using OpenStack Horizon on CloudFerro Cloud](../datavolume/How-to-move-data-volume-between-two-VMs-using-OpenStack-Horizon-on-CloudFerro-Cloud.html)
+The following article includes information how to disconnect a volume from a virtual machine: [How to move data volume between two VMs using OpenStack Horizon on CloudFerro Cloud](../datavolume/How-to-move-data-volume-between-two-VMs-using-OpenStack-Horizon-on-CloudFerro-Cloud.html.md)
 
 No. 4 **Ability to perform operations on both the source project and the destination project**
 
@@ -141,6 +141,6 @@ After cancelling, your volume should now once again have status **Available**:
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-Now that the volume has been transferred, you might want to connect it to a virtual machine. This article includes information how to do that: [How to move data volume between two VMs using OpenStack Horizon on CloudFerro Cloud](../datavolume/How-to-move-data-volume-between-two-VMs-using-OpenStack-Horizon-on-CloudFerro-Cloud.html)
+Now that the volume has been transferred, you might want to connect it to a virtual machine. This article includes information how to do that: [How to move data volume between two VMs using OpenStack Horizon on CloudFerro Cloud](../datavolume/How-to-move-data-volume-between-two-VMs-using-OpenStack-Horizon-on-CloudFerro-Cloud.html.md)
 
-The workflow described in this article can also be done using the OpenStack CLI. Learn more here: [How to transfer volumes between domains and projects using OpenStack CLI client on CloudFerro Cloud](../openstackcli/How-to-transfer-volumes-between-domains-and-projects-using-OpenStack-CLI-client-on-CloudFerro-Cloud.html)
+The workflow described in this article can also be done using the OpenStack CLI. Learn more here: [How to transfer volumes between domains and projects using OpenStack CLI client on CloudFerro Cloud](../openstackcli/How-to-transfer-volumes-between-domains-and-projects-using-OpenStack-CLI-client-on-CloudFerro-Cloud.html.md)

docs/cloud/How-to-upload-custom-image-to-CloudFerro-Cloud-cloud-using-OpenStack-Horizon-dashboard.html.md

@@ -35,7 +35,7 @@ The following container formats are supported:
 > | aki | ami | ari | bare |
 > | docker | ova | ovf |  |
 
-For the explanation of these formats, see article [What Image Formats are Available in OpenStack CloudFerro Cloud cloud](What-Image-Formats-are-available-in-OpenStack-CloudFerro-Cloud-Cloud.html).
+For the explanation of these formats, see article [What Image Formats are Available in OpenStack CloudFerro Cloud cloud](What-Image-Formats-are-available-in-OpenStack-CloudFerro-Cloud-Cloud.html.md).
 
 No. 3 **Uploaded public SSH key**
 

docs/cloud/How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md

@@ -21,7 +21,7 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **OpenStack CLI configured**
 
-You need to have the OpenStack CLI client configured and operational. See [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html). You can test whether your OpenStack CLI is properly activated by executing the **openstack server list** command mentioned in the end of that article - it should return the list of your virtual machines.
+You need to have the OpenStack CLI client configured and operational. See [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md). You can test whether your OpenStack CLI is properly activated by executing the **openstack server list** command mentioned in the end of that article - it should return the list of your virtual machines.
 
 No. 3 **Custom image you wish to upload**
 
@@ -39,7 +39,7 @@ The following container formats are supported:
 > | aki | ami | ari | bare |
 > | docker | ova | ovf |  |
 
-For the explanation of these formats, see article [What Image Formats are Available in OpenStack CloudFerro Cloud cloud](What-Image-Formats-are-available-in-OpenStack-CloudFerro-Cloud-Cloud.html).
+For the explanation of these formats, see article [What Image Formats are Available in OpenStack CloudFerro Cloud cloud](What-Image-Formats-are-available-in-OpenStack-CloudFerro-Cloud-Cloud.html.md).
 
 No. 4 **Uploaded public SSH key**
 

docs/cloud/How-to-use-GUI-in-Linux-VM-on-CloudFerro-Cloud-and-access-it-from-local-Linux-computer.html.md

@@ -30,7 +30,7 @@ No. 3 **Linux virtual machine**
 
 You need a Linux virtual machine running on CloudFerro Cloud cloud. You need to able to access it via SSH. The following article explains how to create one such virtual machine:
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
 
 This article was written for virtual machines using a default Ubuntu 20.04 image on cloud. Adjust the instructions from this article accordingly if your virtual machine has a different Linux distribution.
 

docs/cloud/OpenStack-user-roles-on-CloudFerro-Cloud.html.md

@@ -32,11 +32,11 @@ You need a CloudFerro Cloud hosting account with Horizon access: <https://horizo
 
 Also see:
 
-[What is an OpenStack project on CloudFerro Cloud](What-is-an-OpenStack-project-on-CloudFerro-Cloud.html)
+[What is an OpenStack project on CloudFerro Cloud](What-is-an-OpenStack-project-on-CloudFerro-Cloud.html.md)
 
-[What is an OpenStack domain on CloudFerro Cloud](What-is-an-OpenStack-domain-on-CloudFerro-Cloud.html)
+[What is an OpenStack domain on CloudFerro Cloud](What-is-an-OpenStack-domain-on-CloudFerro-Cloud.html.md)
 
-[How to generate or use Application Credentials via CLI on CloudFerro Cloud](How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html)
+[How to generate or use Application Credentials via CLI on CloudFerro Cloud](How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md)
 
 **2. Familiarity with OpenStack Commands**
 
@@ -44,12 +44,12 @@ Ensure you know the following OpenStack commands:
 
 **openstack**
 :   The primary CLI for interacting with OpenStack services.
-    [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html)
+    [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)
 
 **kubectl**
 :   CLI for Kubernetes clusters. Example article:
 
-    [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+    [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 Frequently used user roles[](#frequently-used-user-roles "Permalink to this headline")
 ---------------------------------------------------------------------------------------
@@ -144,7 +144,7 @@ That S3 article selects user roles when creating an application credential, thro
 
 This is the main article about application credentials; it is mostly using CLI:
 
-[How to generate or use Application Credentials via CLI on CloudFerro Cloud](How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html)
+[How to generate or use Application Credentials via CLI on CloudFerro Cloud](How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md)
 
 Here is how to specify user roles through CLI parameters:
 
@@ -152,14 +152,14 @@ Here is how to specify user roles through CLI parameters:
 
 ### Using user roles while creating a new project[](#using-user-roles-while-creating-a-new-project "Permalink to this headline")
 
-In article [How to Create and Configure New Openstack Project Through Horizon on CloudFerro Cloud Cloud](../openstackcli/How-To-Create-and-Configure-New-Project-on-CloudFerro-Cloud-Cloud.html) we use command **Project Members** to define which users to include into the project:
+In article [How to Create and Configure New Openstack Project Through Horizon on CloudFerro Cloud Cloud](../openstackcli/How-To-Create-and-Configure-New-Project-on-CloudFerro-Cloud-Cloud.html.md) we use command **Project Members** to define which users to include into the project:
 
 ![user-roles-list-create-4.png](../_images/user-roles-list-create-4.png)
 
 You would then continue by defining the roles for each user in the project:
 
 ![user-roles-list-create-5.png](../_images/user-roles-list-create-5.png)
-> See this Rancher article, [How to install Rancher RKE2 Kubernetes on CloudFerro Cloud](../kubernetes/How-to-install-Rancher-RKE2-Kubernetes-on-CloudFerro-Cloud-cloud.html). Then, in Preparation step 1, a new project is created, with the following user roles:
+> See this Rancher article, [How to install Rancher RKE2 Kubernetes on CloudFerro Cloud](../kubernetes/How-to-install-Rancher-RKE2-Kubernetes-on-CloudFerro-Cloud-cloud.html.md). Then, in Preparation step 1, a new project is created, with the following user roles:
 
 * **load-balancer\_member**,
 * **member** and

docs/cloud/Resizing-a-virtual-machine-using-OpenStack-Horizon-on-CloudFerro-Cloud.html.md

@@ -27,13 +27,13 @@ No. 2 **How to create a new VM**
 
 If you are a normal user of CloudFerro Cloud hosting, you will have all prerogatives needed to resize the VM. Make sure that the VM you are about to resize belongs to a project you have access to. Here are the basics of creating a Linux VM in Horizon:
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
 
-[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md)
 
 No. 3 **Awareness of existing quotas and flavors limits**
 
-For general introduction to quotas and flavors, see [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html).
+For general introduction to quotas and flavors, see [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html.md).
 
 Also:
 
@@ -131,4 +131,4 @@ In this case, the sizes of the disk before and after the resizing do not match.
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-You can also resize the virtual machine using only OpenStack CLI. More details here: [Resizing a virtual machine using OpenStack CLI on CloudFerro Cloud](../openstackcli/Resizing-a-virtual-machine-using-OpenStack-CLI-on-CloudFerro-Cloud.html)
+You can also resize the virtual machine using only OpenStack CLI. More details here: [Resizing a virtual machine using OpenStack CLI on CloudFerro Cloud](../openstackcli/Resizing-a-virtual-machine-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)

docs/cloud/Spot-instances-on-CloudFerro-Cloud.html.md

@@ -25,7 +25,7 @@ When using spot instances, be sure to work only on WAW3-2 cloud:
 
 No. 3 **Using quotas and flavors**
 
-For quotas, see this article: [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html)
+For quotas, see this article: [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html.md)
 
 No. 3 **OpenStack CLI client**
 

docs/cloud/VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html.md

@@ -13,7 +13,7 @@ The new Virtual Machine will be created with the System Volume (Root Disk) size
 
 ![volno3.png](../_images/volno3.png)
 
-If you want to select a different size for the System Volume (Root Disk) please read article [VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html).
+If you want to select a different size for the System Volume (Root Disk) please read article [VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html.md).
 
 ![volno4.png](../_images/volno4.png)
 

docs/cloud/What-is-an-OpenStack-domain-on-CloudFerro-Cloud.html.md

@@ -23,4 +23,4 @@ This type of facility is due to a proper implementation of KeyCloak and KeyStone
 
 **Docs**
 
-Click here if you want to see official [OpenStack documentation for domains](https://docs.openstack.org/security-guide/identity/domains.html).
+Click here if you want to see official [OpenStack documentation for domains](https://docs.openstack.org/security-guide/identity/domains.html.md).

docs/cloud/What-is-an-OpenStack-project-on-CloudFerro-Cloud.html.md

@@ -20,4 +20,4 @@ OpenStack users can create projects, and create new accounts using the OpenStack
 
 To remove project its mandatory to manually remove all of its resources first.
 
-Users can create private networks for connectivity within projects [How to create a network with router in Horizon Dashboard on CloudFerro Cloud](../networking/How-to-create-a-network-with-router-in-Horizon-Dashboard-on-CloudFerro-Cloud.html). By default, they are fully isolated and are not shared with other projects.
+Users can create private networks for connectivity within projects [How to create a network with router in Horizon Dashboard on CloudFerro Cloud](../networking/How-to-create-a-network-with-router-in-Horizon-Dashboard-on-CloudFerro-Cloud.html.md). By default, they are fully isolated and are not shared with other projects.

docs/cloud/cloud.html.md

@@ -1,2 +1,38 @@
-CLOUD[](#cloud "Permalink to this headline")
+# Cloud Services
-=============================================
+
+## Available Documentation
+
+* [Block storage and object storage performance limits on CloudFerro Cloud](Block-storage-and-object-storage-performance-limits-on-CloudFerro-Cloud.html.md)
+* [DNS as a Service on CloudFerro Cloud Hosting](DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html.md)
+* [Dashboard Overview Project Quotas And Flavors Limits on CloudFerro Cloud](Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html.md)
+* [How To Create a New Linux VM With NVIDIA Virtual GPU in the OpenStack Dashboard Horizon on CloudFerro Cloud](How-To-Create-a-New-Linux-VM-With-NVIDIA-Virtual-GPU-in-the-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md)
+* [Performing administrative tasks within Windows based VMs[](#performing-administrative-tasks-within-windows-based-vms "Permalink to this headline")](How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html.md)
+* [How to clone existing and configured VMs on CloudFerro Cloud](How-to-clone-existing-and-configured-VMs-on-CloudFerro-Cloud.html.md)
+* [How to create Windows VM on OpenStack Horizon and access it via web console on CloudFerro Cloud](How-to-create-Windows-VM-on-OpenStack-Horizon-and-access-it-via-web-console-on-CloudFerro-Cloud.html.md)
+* [How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
+* [How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md)
+* [How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html.md)
+* [How to create instance snapshot using Horizon on CloudFerro Cloud](How-to-create-instance-snapshot-using-Horizon-on-CloudFerro-Cloud.html.md)
+* [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md)
+* [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md)
+* [How to fix unresponsive console issue on CloudFerro Cloud](How-to-fix-unresponsive-console-issue-on-CloudFerro-Cloud.html.md)
+* [How to generate ec2 credentials on CloudFerro Cloud](How-to-generate-ec2-credentials-on-CloudFerro-Cloud.html.md)
+* [Get the latest packages list and upgrade installed packages](How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md)
+* [How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html.md)
+* [How to start a VM from a snapshot on CloudFerro Cloud](How-to-start-a-VM-from-a-snapshot-on-CloudFerro-Cloud.html.md)
+* [How to start a VM from instance snapshot using Horizon dashboard on CloudFerro Cloud](How-to-start-a-VM-from-instance-snapshot-using-Horizon-dashboard-on-CloudFerro-Cloud.html.md)
+* [How to transfer volumes between domains and projects using Horizon dashboard on CloudFerro Cloud](How-to-transfer-volumes-between-domains-and-projects-using-Horizon-dashboard-on-CloudFerro-Cloud.html.md)
+* [How to upload custom image to CloudFerro Cloud cloud using OpenStack Horizon dashboard](How-to-upload-custom-image-to-CloudFerro-Cloud-cloud-using-OpenStack-Horizon-dashboard.html.md)
+* [How to upload your custom image using OpenStack CLI on CloudFerro Cloud](How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
+* [How to use Docker on CloudFerro Cloud](How-to-use-Docker-on-CloudFerro-Cloud.html.md)
+* [Method 1: Installing MATE[](#method-1-installing-mate "Permalink to this headline")](How-to-use-GUI-in-Linux-VM-on-CloudFerro-Cloud-and-access-it-from-local-Linux-computer.html.md)
+* [During its creation[](#during-its-creation "Permalink to this headline")](How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html.md)
+* [Common user roles[](#common-user-roles "Permalink to this headline")](OpenStack-user-roles-on-CloudFerro-Cloud.html.md)
+* [Resizing a virtual machine using OpenStack Horizon on CloudFerro Cloud](Resizing-a-virtual-machine-using-OpenStack-Horizon-on-CloudFerro-Cloud.html.md)
+* [Spot instances on CloudFerro Cloud](Spot-instances-on-CloudFerro-Cloud.html.md)
+* [Status Power State and dependences in billing of instances VMs on CloudFerro Cloud](Status-Power-State-and-dependences-in-billing-of-instances-VMs-on-CloudFerro-Cloud.html.md)
+* [VM created with option Create New Volume No on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html.md)
+* [VM created with option Create New Volume Yes on CloudFerro Cloud](VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html.md)
+* [What Image Formats are available in OpenStack CloudFerro Cloud Cloud](What-Image-Formats-are-available-in-OpenStack-CloudFerro-Cloud-Cloud.html.md)
+* [What is an OpenStack domain on CloudFerro Cloud](What-is-an-OpenStack-domain-on-CloudFerro-Cloud.html.md)
+* [What is an OpenStack project on CloudFerro Cloud](What-is-an-OpenStack-project-on-CloudFerro-Cloud.html.md)

docs/datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html.md

@@ -1,10 +1,10 @@
 Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud[](#ephemeral-vs-persistent-storage-option-create-new-volume-on-brand-name "Permalink to this headline")
 =====================================================================================================================================================================================
 
-Volumes created in the **Volumes > Volumes** section are *persistent* storage. They can be attached to a virtual machine and then reattached to a different one. They survive the removal of the virtual machine to which they are connected. You can also clone them, which is a simple way of creating a backup. However, if you copy them, you might also be interested in [Volume snapshot inheritance and its consequences on CloudFerro Cloud](Volume-snapshot-inheritance-and-its-consequences-on-CloudFerro-Cloud.html).
+Volumes created in the **Volumes > Volumes** section are *persistent* storage. They can be attached to a virtual machine and then reattached to a different one. They survive the removal of the virtual machine to which they are connected. You can also clone them, which is a simple way of creating a backup. However, if you copy them, you might also be interested in [Volume snapshot inheritance and its consequences on CloudFerro Cloud](Volume-snapshot-inheritance-and-its-consequences-on-CloudFerro-Cloud.html.md).
 
-If you follow the instructions in this article: [VM created with option Create New Volume Yes on CloudFerro Cloud](../cloud/VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html) and set **Delete Volume on Instance Delete** to **No**, the boot drive of such virtual machine will also be persistent storage. You can, for example, use this feature to perform various tests and experiments.
+If you follow the instructions in this article: [VM created with option Create New Volume Yes on CloudFerro Cloud](../cloud/VM-created-with-option-Create-New-Volume-Yes-on-CloudFerro-Cloud.html.md) and set **Delete Volume on Instance Delete** to **No**, the boot drive of such virtual machine will also be persistent storage. You can, for example, use this feature to perform various tests and experiments.
 
-If you do not need persistent storage, use *ephemeral* storage. It cannot be reattached to a different machine and will be removed if the machine is removed. See the article [VM created with option Create New Volume No on CloudFerro Cloud](../cloud/VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html) on how to create a virtual machine with this type of storage.
+If you do not need persistent storage, use *ephemeral* storage. It cannot be reattached to a different machine and will be removed if the machine is removed. See the article [VM created with option Create New Volume No on CloudFerro Cloud](../cloud/VM-created-with-option-Create-New-Volume-No-on-CloudFerro-Cloud.html.md) on how to create a virtual machine with this type of storage.
 
-You may find more information regarding this topic in [the official OpenStack documentation on design storage concepts](https://docs.openstack.org/arch-design/design-storage/design-storage-concepts.html).
+You may find more information regarding this topic in [the official OpenStack documentation on design storage concepts](https://docs.openstack.org/arch-design/design-storage/design-storage-concepts.html.md).

docs/datavolume/How-To-Attach-Volume-To-Windows-VM-On-CloudFerro-Cloud.html.md

@@ -19,7 +19,7 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Windows VM**
 
-You must operate a Microsoft Windows virtual machine running on CloudFerro Cloud cloud. You can access it using the webconsole ([How to access the VM from OpenStack console on CloudFerro Cloud](../cloud/How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html)) or through RDP. If you are using RDP, we strongly recommend using a bastion host for your security: [Connecting to a Windows VM via RDP through a Linux bastion host port forwarding on CloudFerro Cloud](../windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-CloudFerro-Cloud.html).
+You must operate a Microsoft Windows virtual machine running on CloudFerro Cloud cloud. You can access it using the webconsole ([How to access the VM from OpenStack console on CloudFerro Cloud](../cloud/How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html.md)) or through RDP. If you are using RDP, we strongly recommend using a bastion host for your security: [Connecting to a Windows VM via RDP through a Linux bastion host port forwarding on CloudFerro Cloud](../windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-CloudFerro-Cloud.html.md).
 
 Step 1: Create a New Volume[](#step-1-create-a-new-volume "Permalink to this headline")
 ----------------------------------------------------------------------------------------
@@ -143,4 +143,4 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 Once you have gathered some data on your volume, you can create its backup, as explained in this article:
 
-[How to Create Backup of Your Volume From Windows Machine on CloudFerro Cloud](How-To-Create-Backup-Of-Your-Volume-From-Windows-Machine-on-CloudFerro-Cloud.html)
+[How to Create Backup of Your Volume From Windows Machine on CloudFerro Cloud](How-To-Create-Backup-Of-Your-Volume-From-Windows-Machine-on-CloudFerro-Cloud.html.md)

docs/datavolume/How-To-Create-Backup-Of-Your-Volume-From-Windows-Machine-on-CloudFerro-Cloud.html.md

@@ -22,7 +22,7 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Windows VM**
 
-You must operate a Microsoft Windows virtual machine running on CloudFerro Cloud cloud. You can access it using the webconsole ([How to access the VM from OpenStack console on CloudFerro Cloud](../cloud/How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html)) or through RDP. If you are using RDP, we strongly recommend using a bastion host for your security: [Connecting to a Windows VM via RDP through a Linux bastion host port forwarding on CloudFerro Cloud](../windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-CloudFerro-Cloud.html).
+You must operate a Microsoft Windows virtual machine running on CloudFerro Cloud cloud. You can access it using the webconsole ([How to access the VM from OpenStack console on CloudFerro Cloud](../cloud/How-to-access-the-VM-from-OpenStack-console-on-CloudFerro-Cloud.html.md)) or through RDP. If you are using RDP, we strongly recommend using a bastion host for your security: [Connecting to a Windows VM via RDP through a Linux bastion host port forwarding on CloudFerro Cloud](../windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-CloudFerro-Cloud.html.md).
 
 No. 3 **Volume**
 

docs/datavolume/How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md

@@ -5,7 +5,7 @@ In this tutorial, you will create a volume which is smaller than 2 TB. Then, you
 
 Note
 
-If you want to create and attach a volume that has more than 2 TB of storage, you will need to use different software for its formatting. If this is the case, please visit the following article instead: [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html).
+If you want to create and attach a volume that has more than 2 TB of storage, you will need to use different software for its formatting. If this is the case, please visit the following article instead: [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md).
 
 What We Are Going To Cover[](#what-we-are-going-to-cover "Permalink to this headline")
 ---------------------------------------------------------------------------------------
@@ -25,11 +25,11 @@ No. 2 Linux VM running on the CloudFerro Cloud cloud
 
 Instructions for creating and accessing a Linux VM using default images can be found here:
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
 
 or here:
 
-[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html).
+[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md).
 
 The instructions included in this article are designed for Ubuntu 22.04 LTS.
 
@@ -39,7 +39,7 @@ You will need basic knowledge of the Linux command line.
 
 No. 4 **SSH access to the VM**
 
-[How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html).
+[How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md).
 
 Step 1: Create a Volume[](#step-1-create-a-volume "Permalink to this headline")
 --------------------------------------------------------------------------------

docs/datavolume/How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md

@@ -5,7 +5,7 @@ In this tutorial, you will create a volume which is larger than 2 TB. Then, you
 
 Note
 
-If you want to create and attach a volume that has less than 2 TB of storage, you will need to use different software for its formatting. If this is the case, please visit the following article instead: [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html).
+If you want to create and attach a volume that has less than 2 TB of storage, you will need to use different software for its formatting. If this is the case, please visit the following article instead: [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md).
 
 What We Are Going To Cover[](#what-we-are-going-to-cover "Permalink to this headline")
 ---------------------------------------------------------------------------------------
@@ -25,9 +25,9 @@ No. 2 Linux VM running on CloudFerro Cloud cloud
 
 Instructions for creating and accessing a Linux VM using default images can be found here:
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html) or here:
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md) or here:
 
-[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html).
+[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md).
 
 The instructions included in this article are designed for Ubuntu 20.04 LTS.
 
@@ -37,7 +37,7 @@ You will need basic knowledge of the Linux command line.
 
 No. 4 **SSH access to the VM**
 
-[How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html).
+[How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](../networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md).
 
 Step 1: Create a Volume[](#step-1-create-a-volume "Permalink to this headline")
 --------------------------------------------------------------------------------

docs/datavolume/How-to-export-a-volume-over-NFS-on-CloudFerro-Cloud.html.md

@@ -104,7 +104,7 @@ sudo systemctl restart nfs-kernel-server
 
 **IT IS NECESSARY TO OPEN THE PORT 2049 IN A SECURITY GROUP!**
 
-(The FAQ about opening ports in a security group is available at [How can I open new ports for http for my service or instance on CloudFerro Cloud](../networking/How-can-I-open-new-ports-port-80-for-http-for-my-service-or-instance-on-CloudFerro-Cloud.html))
+(The FAQ about opening ports in a security group is available at [How can I open new ports for http for my service or instance on CloudFerro Cloud](../networking/How-can-I-open-new-ports-port-80-for-http-for-my-service-or-instance-on-CloudFerro-Cloud.html.md))
 
 **Client Configuration**
 

docs/datavolume/How-to-extend-the-volume-in-Linux-on-CloudFerro-Cloud.html.md

@@ -11,9 +11,9 @@ Warning
 
 Warning
 
-2. If you have a volume < 2TB and you want to extend it above 2TB, please do not follow below instructions. Instead please create a new volume, format it according to another article: [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html), attach it to the VM, copy the data from the old volume to the new one, check if it is fully copied, detach and delete the old volume.
+2. If you have a volume < 2TB and you want to extend it above 2TB, please do not follow below instructions. Instead please create a new volume, format it according to another article: [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md), attach it to the VM, copy the data from the old volume to the new one, check if it is fully copied, detach and delete the old volume.
 
-You may use following guide to backup the volume: [How to create volume Snapshot and attach as Volume on Linux or Windows on CloudFerro Cloud](How-to-create-volume-Snapshot-and-attach-as-Volume-on-Linux-or-Windows-on-CloudFerro-Cloud.html)
+You may use following guide to backup the volume: [How to create volume Snapshot and attach as Volume on Linux or Windows on CloudFerro Cloud](How-to-create-volume-Snapshot-and-attach-as-Volume-on-Linux-or-Windows-on-CloudFerro-Cloud.html.md)
 
 **Resizing the volume:**
 

docs/datavolume/How-to-mount-object-storage-in-Linux-on-CloudFerro-Cloud.html.md

@@ -16,7 +16,7 @@ Prerequisite No. 2 **Valid EC2 credentials**
 
 The Access Key and Secret Key for access to an s3 account are also called the “EC2 credentials”. See article
 
-[How to generate and manage EC2 credentials on CloudFerro Cloud](../cloud/How-to-generate-ec2-credentials-on-CloudFerro-Cloud.html)
+[How to generate and manage EC2 credentials on CloudFerro Cloud](../cloud/How-to-generate-ec2-credentials-on-CloudFerro-Cloud.html.md)
 
 At this point, you should have access to the cloud environment, using the OpenStack CLI client. It means that the command **openstack** is operational.
 
@@ -72,4 +72,4 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 If you want to access s3 files without mounting to the local computer, use command **s3cmd**.
 
-[How to access private object storage using S3cmd or boto3 on CloudFerro Cloud](../s3/How-to-access-private-object-storage-using-S3cmd-or-boto3-on-CloudFerro-Cloud.html)
+[How to access private object storage using S3cmd or boto3 on CloudFerro Cloud](../s3/How-to-access-private-object-storage-using-S3cmd-or-boto3-on-CloudFerro-Cloud.html.md)

docs/datavolume/Volume-snapshot-inheritance-and-its-consequences-on-CloudFerro-Cloud.html.md

@@ -33,4 +33,4 @@ To delete a volume from which snapshots volumes were created, we must also delet
 
 In conclusion, when creating new volumes from a snapshot, remember about inheritance. Snapshot “Snapshot A” is a parent for the volumes (children) “Volume B” and “Volume C” and if we want to delete the volume “Volume A”, we have to do it from the youngest generation (Volume B and Volume C).
 
-Backups are another solution and they do not create such bonds as snapshots and may exist even after the volume from which the backup was created has been deleted. Please see [How to Backup an Instance and Download it to the Desktop on CloudFerro Cloud OpenStack Hosting](../openstackcli/How-to-backup-an-instance-and-download-it-to-the-desktop-on-CloudFerro-Cloud.html).
+Backups are another solution and they do not create such bonds as snapshots and may exist even after the volume from which the backup was created has been deleted. Please see [How to Backup an Instance and Download it to the Desktop on CloudFerro Cloud OpenStack Hosting](../openstackcli/How-to-backup-an-instance-and-download-it-to-the-desktop-on-CloudFerro-Cloud.html.md).

docs/datavolume/datavolume.html.md

@@ -1,2 +1,20 @@
-DATA VOLUME[](#data-volume "Permalink to this headline")
+# Data Volume Management
-=========================================================
+
+## Available Documentation
+
+* [Bootable versus non bootable volumes on CloudFerro Cloud](Bootable-versus-non-bootable-volumes-on-CloudFerro-Cloud.html.md)
+* [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html.md)
+* [How To Attach Volume To Windows VM On CloudFerro Cloud](How-To-Attach-Volume-To-Windows-VM-On-CloudFerro-Cloud.html.md)
+* [How To Create Backup Of Your Volume From Windows Machine on CloudFerro Cloud](How-To-Create-Backup-Of-Your-Volume-From-Windows-Machine-on-CloudFerro-Cloud.html.md)
+* [How many objects can I put into Object Storage container bucket on CloudFerro Cloud](How-many-objects-can-I-put-into-Object-Storage-container-bucket-on-CloudFerro-Cloud.html.md)
+* [How to attach a volume to VM less than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md)
+* [How to attach a volume to VM more than 2TB on Linux on CloudFerro Cloud](How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-CloudFerro-Cloud.html.md)
+* [How to create or delete volume snapshot on CloudFerro Cloud](How-to-create-or-delete-volume-snapshot-on-CloudFerro-Cloud.html.md)
+* [How to create volume Snapshot and attach as Volume on Linux or Windows on CloudFerro Cloud](How-to-create-volume-Snapshot-and-attach-as-Volume-on-Linux-or-Windows-on-CloudFerro-Cloud.html.md)
+* [/etc/exports: the access control list for filesystems which may be exported](How-to-export-a-volume-over-NFS-on-CloudFerro-Cloud.html.md)
+* [How to export a volume over NFS outside of a project on CloudFerro Cloud](How-to-export-a-volume-over-NFS-outside-of-a-project-on-CloudFerro-Cloud.html.md)
+* [How to extend the volume in Linux on CloudFerro Cloud](How-to-extend-the-volume-in-Linux-on-CloudFerro-Cloud.html.md)
+* [How to mount object storage in Linux on CloudFerro Cloud](How-to-mount-object-storage-in-Linux-on-CloudFerro-Cloud.html.md)
+* [Projects must be on the same cloud[](#projects-must-be-on-the-same-cloud "Permalink to this headline")](How-to-move-data-volume-between-two-VMs-using-OpenStack-Horizon-on-CloudFerro-Cloud.html.md)
+* [How to restore volume from snapshot on CloudFerro Cloud](How-to-restore-volume-from-snapshot-on-CloudFerro-Cloud.html.md)
+* [Volume snapshot inheritance and its consequences on CloudFerro Cloud](Volume-snapshot-inheritance-and-its-consequences-on-CloudFerro-Cloud.html.md)

docs/kubernetes/Autoscaling-Kubernetes-Cluster-Resources-on-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -27,19 +27,19 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Creating clusters with CLI**
 
-The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html) will introduce you to creation of clusters using a command line interface.
+The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) will introduce you to creation of clusters using a command line interface.
 
 No. 3 **Connect openstack client to the cloud**
 
-Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html)
+Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md)
 
 No. 4. **Resizing Nodegroups**
 
-Step 7 of article [Creating Additional Nodegroups in Kubernetes Cluster on CloudFerro Cloud OpenStack Magnum](Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-CloudFerro-Cloud-OpenStack-Magnum.html) shows example of resizing the nodegroups for autoscaling.
+Step 7 of article [Creating Additional Nodegroups in Kubernetes Cluster on CloudFerro Cloud OpenStack Magnum](Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-CloudFerro-Cloud-OpenStack-Magnum.html.md) shows example of resizing the nodegroups for autoscaling.
 
 No. 5 **Creating Clusters**
 
-Step 2 of article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html) shows how to define master and worker nodes for autoscaling.
+Step 2 of article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md) shows how to define master and worker nodes for autoscaling.
 
 There are three different autoscaling features that a Kubernetes cloud can offer:
 

docs/kubernetes/Backup-of-Kubernetes-Cluster-using-Velero.html.md

@@ -34,7 +34,7 @@ No. 2 **How to Access Kubernetes cluster post-deployment**
 
 We shall also assume that you have one or more Kubernetes clusters ready and accessible via a **kubectl** command:
 
-[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 The result of that article will be setting up of system variable **KUBECONFIG**, which points to the configuration file for access to the Kubernetes cloud. A typical command will be:
 
@@ -54,14 +54,14 @@ No. 3 **Handling Helm**
 
 To install Velero, we shall use Helm:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html).
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md).
 
 No. 4 **An object storage S3 bucket available**
 
 To create one, you can access object storage with Horizon interface or CLI.
 
 Horizon commands
-:   [How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html).
+:   [How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html.md).
 
 CLI
 :   You can also use command such as
@@ -71,7 +71,7 @@ openstack container
 
 ```
 
-to work with object storage. For more information see [How to access object storage using OpenStack CLI on CloudFerro Cloud](../openstackcli/How-to-access-object-storage-using-OpenStack-CLI-on-CloudFerro-Cloud.html)
+to work with object storage. For more information see [How to access object storage using OpenStack CLI on CloudFerro Cloud](../openstackcli/How-to-access-object-storage-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
 
 Either way, we shall assume that there is a container called “bucketnew”:
 

docs/kubernetes/CICD-pipelines-with-GitLab-on-CloudFerro-Cloud-Kubernetes-building-a-Docker-image.html.md

@@ -21,13 +21,13 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Kubernetes cluster**
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **Local version of GitLab available**
 
 Your local instance of GitLab is available and properly accessible by your GitLab user.
 
-In this article we assume the setup according to this article [Install GitLab on CloudFerro Cloud Kubernetes](Install-GitLab-on-CloudFerro-Cloud-Kubernetes.html). If you use a different instance of GitLab, there can be some differences e.g. where certain functionalities are located in the GUI.
+In this article we assume the setup according to this article [Install GitLab on CloudFerro Cloud Kubernetes](Install-GitLab-on-CloudFerro-Cloud-Kubernetes.html.md). If you use a different instance of GitLab, there can be some differences e.g. where certain functionalities are located in the GUI.
 
 In this article, we shall be using **gitlab.mysampledomain.info** as the gitlab instance. Be sure to replace it with your own domain.
 
@@ -41,14 +41,14 @@ No. 5 **Account at DockerHub**
 
 No. 6 **Using Kaniko**
 
-[kaniko](https://docs.gitlab.com/ee/ci/docker/using_kaniko.html)
+[kaniko](https://docs.gitlab.com/ee/ci/docker/using_kaniko.html.md)
 is a tool to build container images based on a provided Dockerfile. For more elaborate overview of kaniko refer to its documentation.
 
 No. 7 **Private and public keys available**
 
 To connect to our GitLab instance we need a combination of a private and a public key. You can use any key pair, one option is to use OpenStack Horizon to create one. For reference see:
 
-See [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html)
+See [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md)
 
 Here, we use the key pair to connect to GitLab instance that we previously installed in Prerequisite No. 3.
 

docs/kubernetes/Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Horizon-and-CLI-on-CloudFerro-Cloud.html.md

@@ -230,6 +230,6 @@ curl http://<LOAD_BALANCER_IP>
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-You can wrap up this procedure with Terraform and apply to a larger number of load balancers. See [Configuring IP Whitelisting for OpenStack Load Balancer using Terraform on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html)
+You can wrap up this procedure with Terraform and apply to a larger number of load balancers. See [Configuring IP Whitelisting for OpenStack Load Balancer using Terraform on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html.md)
 
-Also, compare with [Implementing IP Whitelisting for Load Balancers with Security Groups on CloudFerro Cloud](Implementing-IP-Whitelisting-for-Load-Balancers-with-Security-Groups-on-CloudFerro-Cloud.html)
+Also, compare with [Implementing IP Whitelisting for Load Balancers with Security Groups on CloudFerro Cloud](Implementing-IP-Whitelisting-for-Load-Balancers-with-Security-Groups-on-CloudFerro-Cloud.html.md)

docs/kubernetes/Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html.md

@@ -21,17 +21,17 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Basic parameters already defined for whitelisting**
 
-See article [Configuring IP Whitelisting for OpenStack Load Balancer using Horizon and CLI on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Horizon-and-CLI-on-CloudFerro-Cloud.html) for definition of basic notions and parameters.
+See article [Configuring IP Whitelisting for OpenStack Load Balancer using Horizon and CLI on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Horizon-and-CLI-on-CloudFerro-Cloud.html.md) for definition of basic notions and parameters.
 
 No. 3 **Terraform installed**
 
 You will need version 1.50 or higher to be operational.
 
-For complete introduction and installation of Terrafom on OpenStack see article [Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html)
+For complete introduction and installation of Terrafom on OpenStack see article [Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md)
 
 No. 4 **Unrestricted application credentials**
 
-You need to have OpenStack application credentials with unrestricted checkbox. Check article [How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html)
+You need to have OpenStack application credentials with unrestricted checkbox. Check article [How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md)
 
 The first part of that article describes how to have installed OpenStack client and connect it to the cloud. With that provision, the quickest way to create an unrestricted application credential is to apply the command like this:
 
@@ -271,4 +271,4 @@ curl: (28) Connection timed out after 5000 milliseconds
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-Compare with [Implementing IP Whitelisting for Load Balancers with Security Groups on CloudFerro Cloud](Implementing-IP-Whitelisting-for-Load-Balancers-with-Security-Groups-on-CloudFerro-Cloud.html)
+Compare with [Implementing IP Whitelisting for Load Balancers with Security Groups on CloudFerro Cloud](Implementing-IP-Whitelisting-for-Load-Balancers-with-Security-Groups-on-CloudFerro-Cloud.html.md)

docs/kubernetes/Create-and-access-NFS-server-from-Kubernetes-on-CloudFerro-Cloud.html.md

@@ -27,19 +27,19 @@ No. 2 **Familiarity with Linux and cloud management**
 We assume you know the basics of Linux and CloudFerro Cloud cloud management:
 
 * Creating, accessing and using virtual machines
-  [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](../cloud/How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html)
+  [How to create new Linux VM in OpenStack Dashboard Horizon on CloudFerro Cloud](../cloud/How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-CloudFerro-Cloud.html.md)
 
-* Creating security groups [How to use Security Groups in Horizon on CloudFerro Cloud](../cloud/How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html)
+* Creating security groups [How to use Security Groups in Horizon on CloudFerro Cloud](../cloud/How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html.md)
 
-* Attaching floating IPs [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html)
+* Attaching floating IPs [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md)
 
 No. 3 **A running Kubernetes cluster**
 
-You will also need a Kubernetes cluster to try out the commands. To create one from scratch, see [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+You will also need a Kubernetes cluster to try out the commands. To create one from scratch, see [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 4 **kubectl access to the Kubernetes cloud**
 
-As usual when working with Kubernetes clusters, you will need to use the **kubectl** command: [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+As usual when working with Kubernetes clusters, you will need to use the **kubectl** command: [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 1. Set up NFS server on a VM[](#set-up-nfs-server-on-a-vm "Permalink to this headline")
 ----------------------------------------------------------------------------------------

docs/kubernetes/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -40,15 +40,15 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Creating clusters with CLI**
 
-The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html) will introduce you to creation of clusters using a command line interface.
+The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) will introduce you to creation of clusters using a command line interface.
 
 No. 3 **Connect openstack client to the cloud**
 
-Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html)
+Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md)
 
 No. 4 **Check available quotas**
 
-Before creating additional node groups check the state of the resources with Horizon commands **Computer** => **Overview**. See [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](../cloud/Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html).
+Before creating additional node groups check the state of the resources with Horizon commands **Computer** => **Overview**. See [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](../cloud/Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html.md).
 
 Nodegroup Subcommands[](#nodegroup-subcommands "Permalink to this headline")
 -----------------------------------------------------------------------------

docs/kubernetes/Default-Kubernetes-cluster-templates-in-CloudFerro-Cloud-Cloud.html.md

@@ -21,7 +21,7 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Private and public keys**
 
-To create a cluster, you will need an available SSH key pair. If you do not have one already, follow this article to create it in the OpenStack dashboard: [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html).
+To create a cluster, you will need an available SSH key pair. If you do not have one already, follow this article to create it in the OpenStack dashboard: [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md).
 
 No. 3 **Documentation for standard templates**
 
@@ -37,13 +37,13 @@ Documentation for *localstorage* templates:
 
 No. 4 **How to create Kubernetes clusters**
 
-The general procedure is explained in [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+The general procedure is explained in [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 5 **Using vGPU in Kubernetes clusters**
 
 If template name contains “vgpu”, this template can be used to create so-called “vGPU-first” clusters.
 
-To learn how to set up vGPU in Kubernetes clusters on CloudFerro Cloud cloud, see [Deploying vGPU workloads on CloudFerro Cloud Kubernetes](Deploying-vGPU-workloads-on-CloudFerro-Cloud-Kubernetes.html).
+To learn how to set up vGPU in Kubernetes clusters on CloudFerro Cloud cloud, see [Deploying vGPU workloads on CloudFerro Cloud Kubernetes](Deploying-vGPU-workloads-on-CloudFerro-Cloud-Kubernetes.html.md).
 
 Templates available on your cloud[](#templates-available-on-your-cloud "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------

docs/kubernetes/Deploy-Keycloak-on-Kubernetes-with-a-sample-app-on-CloudFerro-Cloud.html.md

@@ -21,7 +21,7 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **A running Kubernetes cluster and kubectl activated**
 
-A Kubernetes cluster, to create one refer to: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html). To activate **kubectl**, see [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+A Kubernetes cluster, to create one refer to: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md). To activate **kubectl**, see [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 3 **Basic knowledge of Python and pip package management**
 

docs/kubernetes/Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html.md

@@ -24,21 +24,21 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Kubernetes cluster deployed on** **cloud, with NGINX Ingress enabled**
 
-See this article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+See this article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **Familiarity with kubectl**
 
-For further instructions refer to [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+For further instructions refer to [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 4 **Familiarity with Kubernetes Ingress feature**
 
-It is explained in article [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html)
+It is explained in article [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 5 **Familiarity with deploying Helm charts**
 
 See this article:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 6 **Must have domain purchased from a registrar**
 
@@ -48,7 +48,7 @@ No. 7 **Use DNS command Horizon to connect to the domain name**
 
 This is optional. Here is the article with detailed information:
 
-[DNS as a Service on CloudFerro Cloud Hosting](../cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html)
+[DNS as a Service on CloudFerro Cloud Hosting](../cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html.md)
 
 Step 1 Install Cert Manager’s Custom Resource Definitions (CRDs)[](#step-1-install-cert-manager-s-custom-resource-definitions-crds "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------------------------------------------------------
@@ -299,6 +299,6 @@ If all works well, the effort is complete and after a couple of minutes we shoul
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-The article [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html) shows how to create an HTTP based service or a site.
+The article [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html.md) shows how to create an HTTP based service or a site.
 
-If you need additional information on Helm charts: [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html).
+If you need additional information on Helm charts: [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md).

docs/kubernetes/Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md

@@ -26,11 +26,11 @@ We assume you have basic understanding of Kubernetes, its notions and ways of wo
 
 No. 3 **A cluster created on** **cloud**
 
-For trying out Helm installation and deployment in an actual environment, create a cluster on cloud using OpenStack Magnum [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+For trying out Helm installation and deployment in an actual environment, create a cluster on cloud using OpenStack Magnum [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 4 **Active connection to the cloud**
 
-For Kubernetes, that means a **kubectl** command line tool installed and **kubeconfig** pointing to a cluster. Instructions are provided in this article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+For Kubernetes, that means a **kubectl** command line tool installed and **kubeconfig** pointing to a cluster. Instructions are provided in this article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 5 **Access to Ubuntu to run code on**
 
@@ -40,9 +40,9 @@ Code samples in this article assume you are running Ubuntu 20.04 LTS or similar
 > * genuine desktop Ubuntu operating system or you can also
 > * create a virtual machine in the CloudFerro Cloud cloud and run the examples from there. These articles will provide technical know-how if you need it:
 
-[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md)
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
 
 Background - How Helm works[](#background-how-helm-works "Permalink to this headline")
 ---------------------------------------------------------------------------------------
@@ -238,4 +238,4 @@ Remember that a chart deployed with Helm is, in the end, just a set of Kubernete
 
 The following article will show how to use JetStack repo to install CertManager, with which you can deploy HTTPS services on Kubernetes cloud:
 
-[Deploying HTTPS Services on Magnum Kubernetes in CloudFerro Cloud Cloud](Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html)
+[Deploying HTTPS Services on Magnum Kubernetes in CloudFerro Cloud Cloud](Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html.md)

docs/kubernetes/Deploying-vGPU-workloads-on-CloudFerro-Cloud-Kubernetes.html.md

@@ -28,7 +28,7 @@ No. 2 **Knowledge of RC files and CLI commands for Magnum**
 
 You should be familiar with utilizing OpenStack CLI and Magnum CLI. Your RC file should be sourced and pointing to your project in OpenStack. See article
 
-[How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html).
+[How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md).
 
 Note
 
@@ -38,11 +38,11 @@ If you are using CLI when creating vGPU nodegroups and are being authenticated w
 
 No. 3 **Cluster and kubectl should be operational**
 
-To connect to the cluster via **kubectl** tool, see this article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+To connect to the cluster via **kubectl** tool, see this article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 4 **Familiarity with the notion of nodegroups**
 
-[Creating Additional Nodegroups in Kubernetes Cluster on CloudFerro Cloud OpenStack Magnum](Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-CloudFerro-Cloud-OpenStack-Magnum.html).
+[Creating Additional Nodegroups in Kubernetes Cluster on CloudFerro Cloud OpenStack Magnum](Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 vGPU flavors per cloud[](#vgpu-flavors-per-cloud "Permalink to this headline")
 -------------------------------------------------------------------------------

docs/kubernetes/Enable-Kubeapps-app-launcher-on-CloudFerro-Cloud-Magnum-Kubernetes-cluster.html.md

@@ -23,15 +23,15 @@ The resources that you require and use will reflect on the state of your account
 
 No. 2 **Create Kubernetes cluster from Horizon GUI**
 
-Know how to create a Kubernetes cluster from Horizon GUI, as described in article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+Know how to create a Kubernetes cluster from Horizon GUI, as described in article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **How to Access Kubernetes cluster post-deployment**
 
-Access to Linux command line and ability to access cluster, as described in article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+Access to Linux command line and ability to access cluster, as described in article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 4 **Handling Helm**
 
-Some familiarity with Helm, to customize app deployments with Kubeapps. See [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html).
+Some familiarity with Helm, to customize app deployments with Kubeapps. See [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md).
 
 No. 5 **Access to CloudFerro clouds**
 
@@ -145,4 +145,4 @@ It is expected that not all applications can be installed with one-click and add
 
 One known limitation is that certain charts will require RWM (ReadWriteMany) persistent volume claims to properly operate. Currently, RWM persistent volumes are not natively available on CloudFerro Cloud cloud. A workaround could be installing NFS server and deploying a StorageClass with RWM-supportive provisioner e.g. using [nfs-subdir-external-provisioner](https://github.com/kubernetes-sigs/nfs-subdir-external-provisioner) project from GitHub.
 
-For NFS on Kubernetes cluster, see [Create and access NFS server from Kubernetes on CloudFerro Cloud](Create-and-access-NFS-server-from-Kubernetes-on-CloudFerro-Cloud.html).
+For NFS on Kubernetes cluster, see [Create and access NFS server from Kubernetes on CloudFerro Cloud](Create-and-access-NFS-server-from-Kubernetes-on-CloudFerro-Cloud.html.md).

docs/kubernetes/GitOps-with-Argo-CD-on-CloudFerro-Cloud-Kubernetes.html.md

@@ -23,21 +23,21 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Kubernetes cluster**
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **Access to cluster with kubectl**
 
-[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 4 **Familiarity with Helm**
 
 Here is how to install and start using Helm charts:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 5 **Access to your own Git repository**
 
-You can host the repository for this article on GitLab instance created in article [Install GitLab on CloudFerro Cloud Kubernetes](Install-GitLab-on-CloudFerro-Cloud-Kubernetes.html). You may also use it with [GitHub](https://github.com/git-guides/install-git), [GitLab](https://docs.gitlab.com/ee/topics/git/how_to_install_git/) and other source control platforms based on **git**.
+You can host the repository for this article on GitLab instance created in article [Install GitLab on CloudFerro Cloud Kubernetes](Install-GitLab-on-CloudFerro-Cloud-Kubernetes.html.md). You may also use it with [GitHub](https://github.com/git-guides/install-git), [GitLab](https://docs.gitlab.com/ee/topics/git/how_to_install_git/) and other source control platforms based on **git**.
 
 No. 6 **git CLI operational**
 
@@ -268,6 +268,6 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 * test applying changes to the deployment in the repository (e.g. commit a deployment with different image in the container spec), verify ArgoCD capturing the change and changing the cluster state
 * customize the deployment of Argo CD to enable HTTPS
-* integrate Argo CD with your identity management tool; for details, see [Deploy Keycloak on Kubernetes with a sample app on CloudFerro Cloud](Deploy-Keycloak-on-Kubernetes-with-a-sample-app-on-CloudFerro-Cloud.html)
+* integrate Argo CD with your identity management tool; for details, see [Deploy Keycloak on Kubernetes with a sample app on CloudFerro Cloud](Deploy-Keycloak-on-Kubernetes-with-a-sample-app-on-CloudFerro-Cloud.html.md)
 
-Also of interest would be the following article: [CI/CD pipelines with GitLab on CloudFerro Cloud Kubernetes - building a Docker image](CICD-pipelines-with-GitLab-on-CloudFerro-Cloud-Kubernetes-building-a-Docker-image.html)
+Also of interest would be the following article: [CI/CD pipelines with GitLab on CloudFerro Cloud Kubernetes - building a Docker image](CICD-pipelines-with-GitLab-on-CloudFerro-Cloud-Kubernetes-building-a-Docker-image.html.md)

docs/kubernetes/HTTP-Request-based-Autoscaling-on-K8S-using-Prometheus-and-Keda-on-CloudFerro-Cloud.html.md

@@ -37,7 +37,7 @@ No. 3 **kubectl pointed to the Kubernetes cluster**
 
 The following article gives options for creating a new cluster and activating the **kubectl** command:
 
-[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 As mentioned, create the cluster **without** installing the NGINX ingress option.
 
@@ -45,7 +45,7 @@ No. 4 **Familiarity with deploying Helm charts**
 
 This article will introduce you to Helm charts on Kubernetes:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 Install NGINX ingress on Magnum cluster[](#install-nginx-ingress-on-magnum-cluster "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------

docs/kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -24,8 +24,8 @@ No. 3 **A cluster already installed on Magnum site**
 
 You may already have a cluster installed if you have followed one of these articles:
 
-> * With Horizon interface: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+> * With Horizon interface: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
-> * With command line interface: [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+> * With command line interface: [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 * Or, you may want to create a new cluster called *k8s-cluster*, just for this occasion – by using the following CLI command:
 
@@ -51,7 +51,7 @@ In the rest of this text we shall use cluster name *k8s-cluster* – be sure to
 
 No. 4 **Connect openstack client to the cloud**
 
-Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html).
+Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md).
 
 The Plan[](#the-plan "Permalink to this headline")
 ---------------------------------------------------
@@ -232,4 +232,4 @@ With **kubectl** operational, you can
 > * list container images in the cluster
 > * use Services, Deployments and all other resources in a Kubernetes cluster.
 
-Kubernetes dashboard is a visual alternative to **kubectl**. To install it, see [Using Dashboard To Access Kubernetes Cluster Post Deployment On CloudFerro Cloud OpenStack Magnum](Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+Kubernetes dashboard is a visual alternative to **kubectl**. To install it, see [Using Dashboard To Access Kubernetes Cluster Post Deployment On CloudFerro Cloud OpenStack Magnum](Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).

docs/kubernetes/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -27,15 +27,15 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Installation of the openstack command**
 
-To activate **kubectl** command, the openstack command from CLI OpenStack Interface must be operational. The first part of article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html) shows how to install it.
+To activate **kubectl** command, the openstack command from CLI OpenStack Interface must be operational. The first part of article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) shows how to install it.
 
 No. 3 **How to create Kubernetes cluster using Horizon commands**
 
-The article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html) shows creation of clusters with Horizon visual interface. (In this article, you shall use it to create an exemplar cluster called *NoLoadBalancer*.)
+The article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md) shows creation of clusters with Horizon visual interface. (In this article, you shall use it to create an exemplar cluster called *NoLoadBalancer*.)
 
 No. 4 **Connect to the Kubernetes Cluster in Order to Use kubectl**
 
-Article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html) will show you how to connect your local machine to the existing Kubernetes cluster.
+Article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) will show you how to connect your local machine to the existing Kubernetes cluster.
 
 How To Enable or Disable Load Balancer for Master Nodes[](#how-to-enable-or-disable-load-balancer-for-master-nodes "Permalink to this headline")
 -------------------------------------------------------------------------------------------------------------------------------------------------

docs/kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md

@@ -40,7 +40,7 @@ You can install the Python and the clients on several environments at once, say,
 
 Note
 
-If you decide to install Python and the OpenStack clients on a virtual machine, you will need SSH keys in order to be able to enter the working environment. See [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html).
+If you decide to install Python and the OpenStack clients on a virtual machine, you will need SSH keys in order to be able to enter the working environment. See [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md).
 
 Prerequisites[](#prerequisites "Permalink to this headline")
 -------------------------------------------------------------
@@ -51,25 +51,25 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Installation of OpenStack CLI on Ubuntu 20.04 Server**
 
-The article [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html) shows how to install OpenStack client on Ubuntu server. That Ubuntu may be the desktop operating system, a virtual machine on some other operating system, or an Ubuntu server in the cloud.
+The article [How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md) shows how to install OpenStack client on Ubuntu server. That Ubuntu may be the desktop operating system, a virtual machine on some other operating system, or an Ubuntu server in the cloud.
 
 Installation on Mac OS will be similar to the installation on Ubuntu.
 
 No. 3 **Installation of OpenStack CLI on Windows**
 
-The article [How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html) shows installation on Windows.
+The article [How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html.md) shows installation on Windows.
 
 No. 4 **General Instructions for Installation of OpenStack Clients**
 
 There are various ways of installing Python and the required clients. For instance, on MacOS, you can install the clients using Python PIP or install them natively, using *homebrew*.
 
-The article [Install the OpenStack command-line clients](https://docs.openstack.org/newton/user-guide/common/cli-install-openstack-command-line-clients.html) will give a systematic introduction to installation of OpenStack family of clients on various operating systems.
+The article [Install the OpenStack command-line clients](https://docs.openstack.org/newton/user-guide/common/cli-install-openstack-command-line-clients.html.md) will give a systematic introduction to installation of OpenStack family of clients on various operating systems.
 
 Once installed, the CLI commands will be identical across various platforms and operating systems.
 
 No. 5 **Connect openstack command to the cloud**
 
-After the successful installation of **openstack** command, it should be connected to the cloud. Follow this article for technical details: [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html).
+After the successful installation of **openstack** command, it should be connected to the cloud. Follow this article for technical details: [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md).
 
 Step 1 Install the CLI for Kubernetes on OpenStack Magnum[](#step-1-install-the-cli-for-kubernetes-on-openstack-magnum "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------------------------------------------
@@ -187,7 +187,7 @@ In this tutorial you have
 > * **openstack** command to access the server in general and
 > * **coe** to access the clusters in particular.
 
-> The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html) explains
+> The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) explains
 
 * the advantages of using the CLI instead of Horizon interface, showing
 * how to create a cluster template as well as

docs/kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -22,15 +22,15 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Private and public keys**
 
-An SSH key-pair created in OpenStack dashboard. To create it, follow this article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html). You will have created keypair called *sshkey* and you will be able to use it for this tutorial as well.
+An SSH key-pair created in OpenStack dashboard. To create it, follow this article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md). You will have created keypair called *sshkey* and you will be able to use it for this tutorial as well.
 
 No. 3 **Command Structure of OpenStack Client Commands**
 
-Here is the manual for OpenStackClient commands: [Command Structure Xena version](https://docs.openstack.org/python-openstackclient/xena/cli/commands.html).
+Here is the manual for OpenStackClient commands: [Command Structure Xena version](https://docs.openstack.org/python-openstackclient/xena/cli/commands.html.md).
 
 No. 4 **Command List of OpenStack Client Commands**
 
-These are all the commands supported by Xena release of OpenStackClient: [Xena Command List](https://docs.openstack.org/python-openstackclient/xena/cli/command-list.html).
+These are all the commands supported by Xena release of OpenStackClient: [Xena Command List](https://docs.openstack.org/python-openstackclient/xena/cli/command-list.html.md).
 
 No. 5 **Documentation for Magnum client**
 
@@ -38,7 +38,7 @@ These are all the commands supported by Xena release of MagnumClient: [Magnum Us
 
 No. 6 **How to install OpenStack and Magnum Clients**
 
-The step that directly precedes this article is: [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html).
+The step that directly precedes this article is: [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md).
 
 In that guide, you have installed the CLI and in this tutorial, you are going to use it to work with Kubernetes on OpenStack Magnum.
 
@@ -365,4 +365,4 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 In this tutorial, you have used the CLI commands to generate cluster templates as well as clusters themselves. Also, if the cluster process failed, how to free up the system resources and try again.
 
-OpenStack and Magnum did heavy lifting for you, letting you create full fledged Kubernetes clusters with only a handful of CLI commands. The next step is to start working with the Kubernetes clusters directly. That means installing the **kubectl** command with article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html) and using it to install the apps that you want to run on Kubernetes clusters.
+OpenStack and Magnum did heavy lifting for you, letting you create full fledged Kubernetes clusters with only a handful of CLI commands. The next step is to start working with the Kubernetes clusters directly. That means installing the **kubectl** command with article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) and using it to install the apps that you want to run on Kubernetes clusters.

docs/kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -24,7 +24,7 @@ Therefore, good practice in creation of new Kubernetes clusters is to create a s
 
 No. 2 **Private and public keys**
 
-An SSH key-pair created in OpenStack dashboard. To create it, follow this article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html).
+An SSH key-pair created in OpenStack dashboard. To create it, follow this article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md).
 
 The key pair created in that article is called “sshkey”. You will use it as one of the parameters for creation of the Kubernetes cluster.
 
@@ -250,8 +250,8 @@ and so on.
 
 Here are some relevant articles:
 
-Read more about ingress here: [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html)
+Read more about ingress here: [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
-Article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html) shows how to use command line interface to create Kubernetes clusters.
+Article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) shows how to use command line interface to create Kubernetes clusters.
 
-To access your newly created cluster from command line, see article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+To access your newly created cluster from command line, see article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).

docs/kubernetes/How-to-create-Kubernetes-cluster-using-Terraform-on-CloudFerro-Cloud.html.md

@@ -14,13 +14,13 @@ No. 2 **Active CLI session with OpenStackClient for Linux**
 
 You need an OpenStack CLI installed and the respective Python virtual environment sourced. For guidelines see:
 
-[How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html)
+[How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)
 
 It will show you how to install Python, create and activate a virtual environment, and then connect to the cloud by downloading and activating the proper RC file from the CloudFerro Cloud cloud.
 
 No. 3 **Connect to the cloud via an RC file**
 
-Another article, [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html), deals with connecting to the cloud and is covering either of the one- or two-factor authentication procedures that are enabled on your account. It also covers all the main platforms: Linux, MacOS and Windows.
+Another article, [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md), deals with connecting to the cloud and is covering either of the one- or two-factor authentication procedures that are enabled on your account. It also covers all the main platforms: Linux, MacOS and Windows.
 
 You will use both the Python virtual environment and the downloaded RC file **after** Terraform has been installed.
 
@@ -28,15 +28,15 @@ No. 4 **Familiarity with creating Kubernetes clusters**
 
 Familiarity with creating Kubernetes clusters in a standard way e.g. using Horizon or OpenStack CLI:
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
-[How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 5 **Terraform operational**
 
 Have Terraform installed locally or on a cloud VM - installation guidelines along with further information can be found in this article:
 
-[Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html)
+[Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md)
 
 After you finish working through that article, you will have access to the cloud via an active **openstack** command. Also, special environmental (**env**) variables (**OS\_USERNAME**, **OS\_PASSWORD**, **OS\_AUTH\_URL** and others) will be set up so that various programs can use them – Terraform being the prime target here.
 

docs/kubernetes/How-to-install-Rancher-RKE2-Kubernetes-on-CloudFerro-Cloud-cloud.html.md

@@ -38,17 +38,17 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Terraform available on your local command line**
 
-See [Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html)
+See [Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md)
 
 No. 3 **Python virtual environment sourced**
 
-[How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](../cloud/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html)
+[How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](../cloud/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html.md)
 
 No. 4 **OpenStack CLI installed locally**
 
 When installed, you will have access to **openstack** command and will be able to communicate with the OpenStack cloud:
 
-[How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html)
+[How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md)
 
 No. 5 **kubectl tool installed locally**
 
@@ -56,25 +56,25 @@ Standard types of **kubectl** installation are described on [Install Tools page]
 
 No. 6 **Available key pair in OpenStack**
 
-[How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html).
+[How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md).
 
 No. 7 **Application credentials**
 
 The following article describes how to create and use application credentials, using CLI:
 
-[How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html)
+[How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md)
 
 In this article, we shall create application credentials through Horizon but with a specific selection of user roles.
 
 No. 8 **Projects, roles, users and groups**
 
-Option **Identity** lists available projects, roles, users and groups. See [What is an OpenStack project on CloudFerro Cloud](../cloud/What-is-an-OpenStack-project-on-CloudFerro-Cloud.html)
+Option **Identity** lists available projects, roles, users and groups. See [What is an OpenStack project on CloudFerro Cloud](../cloud/What-is-an-OpenStack-project-on-CloudFerro-Cloud.html.md)
 
 No. 9 **Experience with Kubernetes and Helm**
 
-To follow up on this article, you should know your way around Kubernetes in general. Having the actual experience of using it on CloudFerro Cloud cloud, would be even better. For a series of article on Kubernetes, see [KUBERNETES](kubernetes.html).
+To follow up on this article, you should know your way around Kubernetes in general. Having the actual experience of using it on CloudFerro Cloud cloud, would be even better. For a series of article on Kubernetes, see [KUBERNETES](kubernetes.html.md).
 
-To perform the installation required in this article, one of the steps will be to create Helm CRD and use it. This article shows the basics of using Helm [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html).
+To perform the installation required in this article, one of the steps will be to create Helm CRD and use it. This article shows the basics of using Helm [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md).
 
 No. 10 **Cloud Controller Manager**
 
@@ -386,4 +386,4 @@ In this article, you have created a proper Kubernetes solution using RKE2 cluste
 
 You can also consider creating Kubernetes clusters using Magnum within OpenStack:
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)

docs/kubernetes/Implementing-IP-Whitelisting-for-Load-Balancers-with-Security-Groups-on-CloudFerro-Cloud.html.md

@@ -26,13 +26,13 @@ No. 3 **A preconfigured load balancer**
 
 In OpenStack, each time you create a Kubernetes cluster, the corresponding load balancers are created automatically.
 
-See article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+See article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 4 **OpenStack command operational**
 
 This is a necessary for CLI procedures.
 
-This boils down to sourcing the proper RC file from Horizon. See [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+This boils down to sourcing the proper RC file from Horizon. See [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 5 **Python Octavia Client**
 
@@ -57,9 +57,9 @@ No. 6 **Terraform installed**
 
 You will need Terraform version 1.50 or higher to be operational.
 
-For complete introduction and installation of Terrafom on OpenStack see article [Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html)
+For complete introduction and installation of Terrafom on OpenStack see article [Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md)
 
-To use Terraform in this capacity, you will need to authenticate to the cloud using application credentials with **unrestricted** access. Check article [How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html)
+To use Terraform in this capacity, you will need to authenticate to the cloud using application credentials with **unrestricted** access. Check article [How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md)
 
 Horizon: Whitelisting Load Balancers[](#horizon-whitelisting-load-balancers "Permalink to this headline")
 ----------------------------------------------------------------------------------------------------------
@@ -334,6 +334,6 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 Compare with articles:
 
-[Configuring IP Whitelisting for OpenStack Load Balancer using Horizon and CLI on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Horizon-and-CLI-on-CloudFerro-Cloud.html)
+[Configuring IP Whitelisting for OpenStack Load Balancer using Horizon and CLI on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Horizon-and-CLI-on-CloudFerro-Cloud.html.md)
 
-[Configuring IP Whitelisting for OpenStack Load Balancer using Terraform on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html)
+[Configuring IP Whitelisting for OpenStack Load Balancer using Terraform on CloudFerro Cloud](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html.md)

docs/kubernetes/Install-GitLab-on-CloudFerro-Cloud-Kubernetes.html.md

@@ -26,7 +26,7 @@ No. 2 **Understand Helm deployments**
 
 To install GitLab on Kubernetes cluster, we will use the appropriate Helm chart. The following article explains the procedure:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 3 **Kubernetes cluster without ingress controller already installed**
 
@@ -39,7 +39,7 @@ The Helm chart for installation of GitHub client will install its own ingress co
 
 General explanation of how to create a Kubernetes cluster is here:
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 Be sure to use cluster template for at least version 1.25, like this:
 
@@ -49,7 +49,7 @@ No. 4 **Have your own domain and be able to manage it**
 
 You will be able to manage the records of a domain associated with your gitlab instance at your domain registrar. Alternatively OpenStack on CloudFerro Cloud hosting lets you manage DNS as a service:
 
-[DNS as a Service on CloudFerro Cloud Hosting](../cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html)
+[DNS as a Service on CloudFerro Cloud Hosting](../cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html.md)
 
 No. 5 **Proof of concept vs. production ready version of GitLab client**
 

docs/kubernetes/Install-and-run-Argo-Workflows-on-CloudFerro-Cloud-Magnum-Kubernetes.html.md

@@ -28,7 +28,7 @@ No. 1 **Account**
 :   You need a CloudFerro Cloud hosting account with access to the Horizon interface: <https://horizon.cloudferro.com>.
 
 No. 2 **kubectl pointed to the Kubernetes cluster**
-:   If you are creating a new cluster, for the purposes of this article, call it *argo-cluster*. See [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+:   If you are creating a new cluster, for the purposes of this article, call it *argo-cluster*. See [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 Authenticate to the cluster[](#authenticate-to-the-cluster "Permalink to this headline")
 -----------------------------------------------------------------------------------------

docs/kubernetes/Install-and-run-Dask-on-a-Kubernetes-cluster-in-CloudFerro-Cloud-cloud.html.md

@@ -25,15 +25,15 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Kubernetes cluster on CloudFerro cloud**
 
-To create Kubernetes cluster on cloud refer to this guide: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+To create Kubernetes cluster on cloud refer to this guide: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **Access to kubectl command line**
 
-The instructions for activation of **kubectl** are provided in: [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+The instructions for activation of **kubectl** are provided in: [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 4 **Familiarity with Helm**
 
-For more information on using Helm and installing apps with Helm on Kubernetes, refer to [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+For more information on using Helm and installing apps with Helm on Kubernetes, refer to [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 5 **Python3 available on your machine**
 

docs/kubernetes/Install-and-run-NooBaa-on-Kubernetes-cluster-in-single-and-multicloud-environment-on-CloudFerro-Cloud.html.md

@@ -31,25 +31,25 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Access to Kubernetes cluster on WAW3-1 cloud**
 
-A cluster on WAW3-1 cloud, where we will run our NooBaa installation - follow guidelines in this article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+A cluster on WAW3-1 cloud, where we will run our NooBaa installation - follow guidelines in this article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 3 **Familiarity with using Object Storage on CloudFerro clouds**
 
-More information in [How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html)
+More information in [How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html.md)
 
 Traditional OpenStack term for imported or downloaded files is *Containers* in main menu option *Object Store*. We will use the term “bucket” for object storage containers, to differentiate vs. container term in Docker/Kubernetes sense.
 
 No. 4 **kubectl operational**
 
-**kubectl** CLI tool installed and pointing to your cluster via KUBECONFIG env. variable - more information in [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+**kubectl** CLI tool installed and pointing to your cluster via KUBECONFIG env. variable - more information in [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 5 **Access to private S3 keys in WAW3-1 cloud**
 
-You may also use access to OpenStack CLI to generate and read the private S3 keys - [How to generate and manage EC2 credentials on CloudFerro Cloud](../cloud/How-to-generate-ec2-credentials-on-CloudFerro-Cloud.html).
+You may also use access to OpenStack CLI to generate and read the private S3 keys - [How to generate and manage EC2 credentials on CloudFerro Cloud](../cloud/How-to-generate-ec2-credentials-on-CloudFerro-Cloud.html.md).
 
 No. 6 **Familiarity with s3cmd for accessing object storage**
 
-For more info on **s3cmd**, see [How to access private object storage using S3cmd or boto3 on CloudFerro Cloud](../s3/How-to-access-private-object-storage-using-S3cmd-or-boto3-on-CloudFerro-Cloud.html).
+For more info on **s3cmd**, see [How to access private object storage using S3cmd or boto3 on CloudFerro Cloud](../s3/How-to-access-private-object-storage-using-S3cmd-or-boto3-on-CloudFerro-Cloud.html.md).
 
 No. 7 **Access to WAW3-2 cloud**
 
@@ -83,7 +83,7 @@ This will result in an output similar to the below:
 Apply preliminary configuration[](#apply-preliminary-configuration "Permalink to this headline")
 -------------------------------------------------------------------------------------------------
 
-We will need to apply additional configuration on a Magnum cluster to avoid PodSecurityPolicy exception. For a refresher, see article [Installing JupyterHub on Magnum Kubernetes Cluster in CloudFerro Cloud Cloud](Installing-JupyterHub-on-Magnum-Kubernetes-cluster-in-CloudFerro-Cloud-cloud.html).
+We will need to apply additional configuration on a Magnum cluster to avoid PodSecurityPolicy exception. For a refresher, see article [Installing JupyterHub on Magnum Kubernetes Cluster in CloudFerro Cloud Cloud](Installing-JupyterHub-on-Magnum-Kubernetes-cluster-in-CloudFerro-Cloud-cloud.html.md).
 
 Let’s start by creating a dedicated namespace for Noobaa artifacts:
 

docs/kubernetes/Installing-HashiCorp-Vault-on-CloudFerro-Cloud-Magnum.html.md

@@ -42,13 +42,13 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Familiarity with kubectl**
 
-You should have an appropriate Kubernetes cluster up and running, with **kubectl** pointing to it [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+You should have an appropriate Kubernetes cluster up and running, with **kubectl** pointing to it [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **Familiarity with deploying Helm charts**
 
 This article will introduce you to Helm charts on Kubernetes:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 Step 1 Install CFSSL[](#step-1-install-cfssl "Permalink to this headline")
 ---------------------------------------------------------------------------
@@ -547,4 +547,4 @@ Now you have Vault server as a part of the cluster and you can also use it from
 
 Another way to improve Kubernetes security is securing applications with HTTPS using ingress:
 
-[Deploying HTTPS Services on Magnum Kubernetes in CloudFerro Cloud Cloud](Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html).
+[Deploying HTTPS Services on Magnum Kubernetes in CloudFerro Cloud Cloud](Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html.md).

docs/kubernetes/Installing-JupyterHub-on-Magnum-Kubernetes-cluster-in-CloudFerro-Cloud-cloud.html.md

@@ -24,13 +24,13 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **kubectl up and running**
 
-For further instructions refer to [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+For further instructions refer to [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 No. 3 **Helm up and running**
 
 Helm is package manager for Kubernetes as explained in article
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 4 **A registered domain name available**
 

docs/kubernetes/Kubernetes-cluster-observability-with-Prometheus-and-Grafana-on-CloudFerro-Cloud.html.md

@@ -24,15 +24,15 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **A cluster created on** **cloud**
 
-Kubernetes cluster available. For guideline on creating a Kubernetes cluster refer to [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+Kubernetes cluster available. For guideline on creating a Kubernetes cluster refer to [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 3 **Familiarity with Helm**
 
-For more information on using Helm and installing apps with Helm on Kubernetes, refer to [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+For more information on using Helm and installing apps with Helm on Kubernetes, refer to [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 4 **Access to kubectl command line**
 
-The instructions for activation of **kubectl** are provided in: [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+The instructions for activation of **kubectl** are provided in: [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 1. Install Prometheus with Helm[](#install-prometheus-with-helm "Permalink to this headline")
 ----------------------------------------------------------------------------------------------
@@ -209,4 +209,4 @@ You can find and import many other dashboards for Kubernetes observability by br
 
 The following article shows another approach to creating a Kubernetes dashboard:
 
-[Using Dashboard To Access Kubernetes Cluster Post Deployment On CloudFerro Cloud OpenStack Magnum](Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[Using Dashboard To Access Kubernetes Cluster Post Deployment On CloudFerro Cloud OpenStack Magnum](Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)

docs/kubernetes/Private-container-registries-with-Harbor-on-CloudFerro-Cloud-Kubernetes.html.md

@@ -38,17 +38,17 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **A cluster on CloudFerro-Cloud cloud**
 
-A Kubernetes cluster on CloudFerro Cloud cloud. Follow guidelines in this article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+A Kubernetes cluster on CloudFerro Cloud cloud. Follow guidelines in this article [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 No. 3 **kubectl operational**
 
-**kubectl** CLI tool installed and pointing to your cluster via KUBECONFIG environment variable. Article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html) provides further guidance.
+**kubectl** CLI tool installed and pointing to your cluster via KUBECONFIG environment variable. Article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) provides further guidance.
 
 No. 4 **Familiarity with deploying Helm charts**
 
 See this article:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 5 **Domain purchased from a registrar**
 
@@ -58,11 +58,11 @@ No. 6 **Use DNS service in Horizon to link Harbor service to the domain name**
 
 This is optional. Here is the article with detailed information:
 
-[DNS as a Service on CloudFerro Cloud Hosting](../cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html)
+[DNS as a Service on CloudFerro Cloud Hosting](../cloud/DNS-as-a-Service-on-CloudFerro-Cloud-Hosting.html.md)
 
 No. 7 **Docker installed on your machine**
 
-See [How to install and use Docker on Ubuntu 24.04](../cloud/How-to-use-Docker-on-CloudFerro-Cloud.html).
+See [How to install and use Docker on Ubuntu 24.04](../cloud/How-to-use-Docker-on-CloudFerro-Cloud.html.md).
 
 Deploy Harbor private registry with Bitnami-Harbor Helm chart[](#deploy-harbor-private-registry-with-bitnami-harbor-helm-chart "Permalink to this headline")
 -------------------------------------------------------------------------------------------------------------------------------------------------------------

docs/kubernetes/Sealed-Secrets-on-CloudFerro-Cloud-Kubernetes.html.md

@@ -25,19 +25,19 @@ No. 2 **Understand Helm deployments**
 
 To install Sealed Secrets on Kubernetes cluster, we will use the appropriate Helm chart. The following article explains the procedure:
 
-[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html)
+[Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
 
 No. 3 **Kubernetes cluster**
 
 General explanation of how to create a Kubernetes cluster is here:
 
-[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 For new cluster, using the latest version of the cluster template is always recommended. This article was tested with Kubernetes 1.25.
 
 No. 4 **Access to cluster with kubectl**
 
-[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 Step 1 Install the Sealed Secrets controller[](#step-1-install-the-sealed-secrets-controller "Permalink to this headline")
 ---------------------------------------------------------------------------------------------------------------------------
@@ -174,4 +174,4 @@ The command prompt will change to **#**, meaning the command you enter is execut
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-Sealed Secrets present a viable alternative to secret management using additional tools such as HashiCorp-Vault. For additional information, see [Installing HashiCorp Vault on CloudFerro Cloud Magnum](Installing-HashiCorp-Vault-on-CloudFerro-Cloud-Magnum.html).
+Sealed Secrets present a viable alternative to secret management using additional tools such as HashiCorp-Vault. For additional information, see [Installing HashiCorp Vault on CloudFerro Cloud Magnum](Installing-HashiCorp-Vault-on-CloudFerro-Cloud-Magnum.html.md).

docs/kubernetes/Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -24,7 +24,7 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Cluster and kubectl should be already operational**
 
-To eventually set up a cluster and connect it to the **kubectl** tool, see this article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+To eventually set up a cluster and connect it to the **kubectl** tool, see this article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 The important intermediary result of that article is a command like this:
 

docs/kubernetes/Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -29,7 +29,7 @@ Basic knowledge of Kubernetes fundamentals will come handy: cluster creation, po
 
 No. 3 **Access to kubectl command**
 
-To install necessary software (if you haven’t done so already), see article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html).
+To install necessary software (if you haven’t done so already), see article [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 The net result of following instructions in that and the related articles will be
 
@@ -39,7 +39,7 @@ The net result of following instructions in that and the related articles will b
 Step 1 Create a Magnum Kubernetes cluster with NGINX Ingress enabled[](#step-1-create-a-magnum-kubernetes-cluster-with-nginx-ingress-enabled "Permalink to this headline")
 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
-When we create a Kubernetes cluster on the cloud, we can deploy it with a preconfigured ingress setup. This requires minimal setting and is described in this help section: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html).
+When we create a Kubernetes cluster on the cloud, we can deploy it with a preconfigured ingress setup. This requires minimal setting and is described in this help section: [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md).
 
 Such a cluster is deployed with an NGINX *ingress controller* and the default *ingress backend*. The role of the controller is to enable the provisioning of the infrastructure e.g. the (virtual) load balancer. The role of the backend is to provide access to this infrastructure in line with the rules defined by the **ingress resource** (explained later).
 
@@ -117,7 +117,7 @@ nginx-web         NodePort       10.254.101.230   <none>           80:32532/TCP
 
 The services were created with the type *NodePort*, which is a required type to work with ingress. Therefore, they are not yet exposed under a public IP. The servers are, however, already running and serving their default welcome pages.
 
-You could verify that by assigning a floating IP to one of the nodes (see [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html)). Then SSH to the node and run the following command:
+You could verify that by assigning a floating IP to one of the nodes (see [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](../networking/How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md)). Then SSH to the node and run the following command:
 
 ```
 curl <name-of-node>:<port-number>

docs/kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-CloudFerro-Cloud-OpenStack-Magnum.html.md

@@ -36,11 +36,11 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 2 **Creating clusters with CLI**
 
-The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html) will introduce you to creation of clusters using a command line interface.
+The article [How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md) will introduce you to creation of clusters using a command line interface.
 
 3 **Connect openstack client to the cloud**
 
-Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html)
+Prepare **openstack** and **magnum** clients by executing *Step 2 Connect OpenStack and Magnum Clients to Horizon Cloud* from article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md)
 
 4 **Check available quotas**
 
@@ -48,7 +48,7 @@ Before creating additional cluster check the state of the resources with Horizon
 
 5 **Private and public keys**
 
-An SSH key-pair created in OpenStack dashboard. To create it, follow this article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html). You will have created keypair called “sshkey” and you will be able to use it for this tutorial as well.
+An SSH key-pair created in OpenStack dashboard. To create it, follow this article [How to create key pair in OpenStack Dashboard on CloudFerro Cloud](../cloud/How-to-create-key-pair-in-OpenStack-Dashboard-on-CloudFerro-Cloud.html.md). You will have created keypair called “sshkey” and you will be able to use it for this tutorial as well.
 
 6 **Types of Volumes**
 

docs/kubernetes/kubernetes.html.md

@@ -1,2 +1,40 @@
-KUBERNETES[](#kubernetes "Permalink to this headline")
+# Kubernetes
-=======================================================
+
+## Available Documentation
+
+* [Automatic Kubernetes cluster upgrade on CloudFerro Cloud OpenStack Magnum](Automatic-Kubernetes-cluster-upgrade-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [Autoscaling Kubernetes Cluster Resources on CloudFerro Cloud OpenStack Magnum](Autoscaling-Kubernetes-Cluster-Resources-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [Installation step 1 Getting EC2 client credentials[](#installation-step-1-getting-ec2-client-credentials "Permalink to this headline")](Backup-of-Kubernetes-Cluster-using-Velero.html.md)
+* [CICD pipelines with GitLab on CloudFerro Cloud Kubernetes building a Docker image](CICD-pipelines-with-GitLab-on-CloudFerro-Cloud-Kubernetes-building-a-Docker-image.html.md)
+* [Prepare Your Environment[](#prepare-your-environment "Permalink to this headline")](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Horizon-and-CLI-on-CloudFerro-Cloud.html.md)
+* [Required for Load Balancer v2 API](Configuring-IP-Whitelisting-for-OpenStack-Load-Balancer-using-Terraform-on-CloudFerro-Cloud.html.md)
+* [Create and access NFS server from Kubernetes on CloudFerro Cloud](Create-and-access-NFS-server-from-Kubernetes-on-CloudFerro-Cloud.html.md)
+* [Creating Additional Nodegroups in Kubernetes Cluster on CloudFerro Cloud OpenStack Magnum](Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [Network plugins for Kubernetes clusters[](#network-plugins-for-kubernetes-clusters "Permalink to this headline")](Default-Kubernetes-cluster-templates-in-CloudFerro-Cloud-Cloud.html.md)
+* [Deploy Keycloak on Kubernetes with a sample app on CloudFerro Cloud](Deploy-Keycloak-on-Kubernetes-with-a-sample-app-on-CloudFerro-Cloud.html.md)
+* [export KUBECONFIG=<your-kubeconfig-file-location>](Deploying-HTTPS-Services-on-Magnum-Kubernetes-in-CloudFerro-Cloud-Cloud.html.md)
+* [Deploying Helm Charts on Magnum Kubernetes Clusters on CloudFerro Cloud Cloud](Deploying-Helm-Charts-on-Magnum-Kubernetes-Clusters-on-CloudFerro-Cloud-Cloud.html.md)
+* [Verify the vGPU installation[](#verify-the-vgpu-installation "Permalink to this headline")](Deploying-vGPU-workloads-on-CloudFerro-Cloud-Kubernetes.html.md)
+* [Enable Kubeapps app launcher on CloudFerro Cloud Magnum Kubernetes cluster](Enable-Kubeapps-app-launcher-on-CloudFerro-Cloud-Magnum-Kubernetes-cluster.html.md)
+* [GitOps with Argo CD on CloudFerro Cloud Kubernetes](GitOps-with-Argo-CD-on-CloudFerro-Cloud-Kubernetes.html.md)
+* [name of the deployment, must be in the same namespace as ScaledObject](HTTP-Request-based-Autoscaling-on-K8S-using-Prometheus-and-Keda-on-CloudFerro-Cloud.html.md)
+* [How To Access Kubernetes Cluster Post Deployment Using Kubectl On CloudFerro Cloud OpenStack Magnum](How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [How To Create API Server LoadBalancer for Kubernetes Cluster On CloudFerro Cloud OpenStack Magnum](How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md)
+* [Reproduce Commands Through Cut & Paste[](#reproduce-commands-through-cut-paste "Permalink to this headline")](How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [How to Create a Kubernetes Cluster Using CloudFerro Cloud OpenStack Magnum](How-to-Create-a-Kubernetes-Cluster-Using-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [Define providers](How-to-create-Kubernetes-cluster-using-Terraform-on-CloudFerro-Cloud.html.md)
+* [Preparation step 1 Create new project[](#preparation-step-1-create-new-project "Permalink to this headline")](How-to-install-Rancher-RKE2-Kubernetes-on-CloudFerro-Cloud-cloud.html.md)
+* [Verification[](#verification "Permalink to this headline")](Implementing-IP-Whitelisting-for-Load-Balancers-with-Security-Groups-on-CloudFerro-Cloud.html.md)
+* [Install GitLab on CloudFerro Cloud Kubernetes](Install-GitLab-on-CloudFerro-Cloud-Kubernetes.html.md)
+* [Install and run Argo Workflows on CloudFerro Cloud Magnum Kubernetes](Install-and-run-Argo-Workflows-on-CloudFerro-Cloud-Magnum-Kubernetes.html.md)
+* [Pandas](Install-and-run-Dask-on-a-Kubernetes-cluster-in-CloudFerro-Cloud-cloud.html.md)
+* [Step 1. Create object storage bucket on WAW3-1[](#step-1-create-object-storage-bucket-on-waw3-1 "Permalink to this headline")](Install-and-run-NooBaa-on-Kubernetes-cluster-in-single-and-multicloud-environment-on-CloudFerro-Cloud.html.md)
+* [Vault Helm Chart Value Overrides](Installing-HashiCorp-Vault-on-CloudFerro-Cloud-Magnum.html.md)
+* [Installing JupyterHub on Magnum Kubernetes cluster in CloudFerro Cloud cloud](Installing-JupyterHub-on-Magnum-Kubernetes-cluster-in-CloudFerro-Cloud-cloud.html.md)
+* [Kubernetes cluster observability with Prometheus and Grafana on CloudFerro Cloud](Kubernetes-cluster-observability-with-Prometheus-and-Grafana-on-CloudFerro-Cloud.html.md)
+* [Ensure Docker trust - Step 1. Bypass Docker validating the domain certificate[](#ensure-docker-trust-step-1-bypass-docker-validating-the-domain-certificate "Permalink to this headline")](Private-container-registries-with-Harbor-on-CloudFerro-Cloud-Kubernetes.html.md)
+* [Sealed Secrets on CloudFerro Cloud Kubernetes](Sealed-Secrets-on-CloudFerro-Cloud-Kubernetes.html.md)
+* [Using Dashboard To Access Kubernetes Cluster Post Deployment On CloudFerro Cloud OpenStack Magnum](Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [Using Kubernetes Ingress on CloudFerro Cloud OpenStack Magnum](Using-Kubernetes-Ingress-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)
+* [df -h](Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-CloudFerro-Cloud-OpenStack-Magnum.html.md)

docs/networking/How-is-my-VM-visible-in-the-internet-with-no-Floating-IP-attached-on-CloudFerro-Cloud.html.md

@@ -28,4 +28,4 @@ Yes. If you want to send data from your VM to an external server, you should als
 Is my VM accessible from the outside without floating IP?[](#is-my-vm-accessible-from-the-outside-without-floating-ip "Permalink to this headline")
 ----------------------------------------------------------------------------------------------------------------------------------------------------
 
-No. If a VM needs to be accessible from the Internet, a floating IP address must be attached to the instance. For more information on assigning Floating IPs to the instance, please see the following article: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html).
+No. If a VM needs to be accessible from the Internet, a floating IP address must be attached to the instance. For more information on assigning Floating IPs to the instance, please see the following article: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md).

docs/networking/How-to-Import-SSH-Public-Key-to-OpenStack-Horizon-on-CloudFerro-Cloud.html.md

@@ -7,7 +7,7 @@ By importing it directly to Horizon, you will eliminate the need to use tools li
 
 Warning
 
-After uploading your public key, you will not be able to apply it to an already created virtual machine. If you need to add a key to an existing VM, please follow this article instead: [How to add SSH key from Horizon web console on CloudFerro Cloud](How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html).
+After uploading your public key, you will not be able to apply it to an already created virtual machine. If you need to add a key to an existing VM, please follow this article instead: [How to add SSH key from Horizon web console on CloudFerro Cloud](How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html.md).
 
 Note
 

docs/networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md

@@ -13,7 +13,7 @@ For example, when you create an SSH key named “**testkey**” in the Horizon d
 
 **2. Connecting to a virtual machine via SSH:**
 
-2.1. If your virtual machine has already been assigned a Floating IP (the instances menu next to your virtual machine lists the IP address) you can proceed to the next step. If not, please follow the guide: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html).
+2.1. If your virtual machine has already been assigned a Floating IP (the instances menu next to your virtual machine lists the IP address) you can proceed to the next step. If not, please follow the guide: [How to Add or Remove Floating IP’s to your VM on CloudFerro Cloud](How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md).
 
 2.2. Go to the **~/.ssh** folder where your SSH keys were saved to. Start your terminal (right click and click “Open in Terminal”).
 

docs/networking/How-to-run-and-configure-Firewall-as-a-service-and-VPN-as-a-service-on-CloudFerro-Cloud.html.md

@@ -145,7 +145,7 @@ Choose **launch instance**.
 
 **Configuring VPN service**
 
-Prerequisities: For configuring your VPN server using Graphical Interface you need a VM with preinstalled GUI (for example MINT, XFCE etc.) and connected to **Internal** network. Click here for instructions how to install GUI on Ubuntu 20.04 VM: [How to Use GUI in Linux VM on CloudFerro Cloud and access it From Local Linux Computer](../cloud/How-to-use-GUI-in-Linux-VM-on-CloudFerro-Cloud-and-access-it-from-local-Linux-computer.html).
+Prerequisities: For configuring your VPN server using Graphical Interface you need a VM with preinstalled GUI (for example MINT, XFCE etc.) and connected to **Internal** network. Click here for instructions how to install GUI on Ubuntu 20.04 VM: [How to Use GUI in Linux VM on CloudFerro Cloud and access it From Local Linux Computer](../cloud/How-to-use-GUI-in-Linux-VM-on-CloudFerro-Cloud-and-access-it-from-local-Linux-computer.html.md).
 
 27. In your default WEB browser open IP **10.200.200.1**.
 

docs/networking/networking.html.md

@@ -1,2 +1,16 @@
-NETWORKING[](#networking "Permalink to this headline")
+# Networking
-=======================================================
+
+## Available Documentation
+
+* [Cannot access VM with SSH or PING on CloudFerro Cloud](Cannot-access-VM-with-SSH-or-PING-on-CloudFerro-Cloud.html.md)
+* [Cannot ping VM on CloudFerro Cloud](Cannot-ping-VM-on-CloudFerro-Cloud.html.md)
+* [Generating a SSH keypair in Linux on CloudFerro Cloud](Generating-a-SSH-keypair-in-Linux-on-CloudFerro-Cloud.html.md)
+* [How can I access my VMs using names instead of IP addresses on CloudFerro Cloud](How-can-I-access-my-VMs-using-names-instead-of-IP-addresses-on-CloudFerro-Cloud.html.md)
+* [How can I open new ports port 80 for http for my service or instance on CloudFerro Cloud](How-can-I-open-new-ports-port-80-for-http-for-my-service-or-instance-on-CloudFerro-Cloud.html.md)
+* [How is my VM visible in the internet with no Floating IP attached on CloudFerro Cloud](How-is-my-VM-visible-in-the-internet-with-no-Floating-IP-attached-on-CloudFerro-Cloud.html.md)
+* [How to Add or Remove Floating IPs to your VM on CloudFerro Cloud](How-to-Add-or-Remove-Floating-IPs-to-your-VM-on-CloudFerro-Cloud.html.md)
+* [How to Import SSH Public Key to OpenStack Horizon on CloudFerro Cloud](How-to-Import-SSH-Public-Key-to-OpenStack-Horizon-on-CloudFerro-Cloud.html.md)
+* [How to add SSH key from Horizon web console on CloudFerro Cloud](How-to-add-SSH-key-from-Horizon-web-console-on-CloudFerro-Cloud.html.md)
+* [How to connect to your virtual machine via SSH in Linux on CloudFerro Cloud](How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-CloudFerro-Cloud.html.md)
+* [How to create a network with router in Horizon Dashboard on CloudFerro Cloud](How-to-create-a-network-with-router-in-Horizon-Dashboard-on-CloudFerro-Cloud.html.md)
+* [How to run and configure Firewall as a service and VPN as a service on CloudFerro Cloud](How-to-run-and-configure-Firewall-as-a-service-and-VPN-as-a-service-on-CloudFerro-Cloud.html.md)

docs/openstackcli/How-To-Create-and-Configure-New-Project-on-CloudFerro-Cloud-Cloud.html.md

@@ -34,17 +34,17 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **Introduction to OpenStack Projects**
 
-The article [What is an OpenStack project on CloudFerro Cloud](../cloud/What-is-an-OpenStack-project-on-CloudFerro-Cloud.html) will define basic elements of an OpenStack project – groups, projects, roles and so on.
+The article [What is an OpenStack project on CloudFerro Cloud](../cloud/What-is-an-OpenStack-project-on-CloudFerro-Cloud.html.md) will define basic elements of an OpenStack project – groups, projects, roles and so on.
 
 No. 3 **Security groups**
 
-The article [How to use Security Groups in Horizon on CloudFerro Cloud](../cloud/How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html) describes how to create and edit security groups. They enable ports through which the virtual machine communicates with other networks, in particular, with the Internet at large.
+The article [How to use Security Groups in Horizon on CloudFerro Cloud](../cloud/How-to-use-Security-Groups-in-Horizon-on-CloudFerro-Cloud.html.md) describes how to create and edit security groups. They enable ports through which the virtual machine communicates with other networks, in particular, with the Internet at large.
 
 No. 4 **Create network with router**
 
 Here is how to create a network with router:
 
-[How to create a network with router in Horizon Dashboard on CloudFerro Cloud](../networking/How-to-create-a-network-with-router-in-Horizon-Dashboard-on-CloudFerro-Cloud.html)
+[How to create a network with router in Horizon Dashboard on CloudFerro Cloud](../networking/How-to-create-a-network-with-router-in-Horizon-Dashboard-on-CloudFerro-Cloud.html.md)
 
 Default values in the tenant manager account[](#default-values-in-the-tenant-manager-account "Permalink to this headline")
 ---------------------------------------------------------------------------------------------------------------------------
@@ -130,7 +130,7 @@ For security groups, the situation is similar: the default one is present, but t
 Step 2 Add external network to the project[](#step-2-add-external-network-to-the-project "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------------
 
-To add external network to such project you must contact Customer Support by creating a ticket. Instructions how to do that are in article [Helpdesk and Support](../accountmanagement/Help-Desk-And-Support.html). The ticket should include project ID from the Projects list. To get the project ID, click on **Project** -> **API Access**
+To add external network to such project you must contact Customer Support by creating a ticket. Instructions how to do that are in article [Helpdesk and Support](../accountmanagement/Help-Desk-And-Support.html.md). The ticket should include project ID from the Projects list. To get the project ID, click on **Project** -> **API Access**
 
 ![api_access.png](../_images/api_access.png)
 
@@ -161,14 +161,14 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 Your **testproject** is ready for creating new instances. For example, see articles:
 
-[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Windows desktop on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-CloudFerro-Cloud.html.md)
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html)
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md)
 
 If you want a new user to have access to **testproject**, the following articles will come handy:
 
-[Inviting new user to your Organization](../accountmanagement/Inviting-New-User.html).
+[Inviting new user to your Organization](../accountmanagement/Inviting-New-User.html.md).
 
-[Removing user from Organization](../accountmanagement/Removing-User-From-Organization.html).
+[Removing user from Organization](../accountmanagement/Removing-User-From-Organization.html.md).
 
 /accountmanagement/Accounts-and-Projects-Management.

docs/openstackcli/How-to-access-object-storage-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md

@@ -27,20 +27,20 @@ You need a CloudFerro Cloud hosting account, available at <https://portal.cloudf
 
 No. 2 **Install or activate openstack command**
 
-To be able to connect to the cloud, **openstack** command must be operational. If not installed already, use article [How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html)
+To be able to connect to the cloud, **openstack** command must be operational. If not installed already, use article [How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)
 
 No. 3 **Authenticate to OpenStack using application credentials**
 
 Then you have to authenticate your account to the cloud. The usual way is to activate **openstack** command using an RC file for on- or two-factor
 authentication. That will not work in case of Swift module. It is authenticated with application credentials, as explained in article
 
-[How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html).
+[How to generate or use Application Credentials via CLI on CloudFerro Cloud](../cloud/How-to-generate-or-use-Application-Credentials-via-CLI-on-CloudFerro-Cloud.html.md).
 
 No. 4 **Familiarity with object storage on** CloudFerro Cloud **OpenStack**
 
 This article is explaining the basics, using the Horizon interface:
 
-[How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html).
+[How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html.md).
 
 Swift can be understood as the CLI tool for accessing object storage under OpenStack.
 

docs/openstackcli/How-to-backup-an-instance-and-download-it-to-the-desktop-on-CloudFerro-Cloud.html.md

@@ -3,9 +3,9 @@ How to Backup an Instance and Download it to the Desktop on CloudFerro Cloud Ope
 
 First, you will need to setup the OpenStack CLI environment on the computer to which you want to download your instance. Depending on the operating system you are using, follow one of the links below:
 
-[How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html)
+[How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)
 
-[How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html)
+[How to install OpenStackClient GitBash for Windows on CloudFerro Cloud](How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html.md)
 
 Assume that you are
 

docs/openstackcli/How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html.md

@@ -24,9 +24,9 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Installed Python and its virtualenv**
 
-If you want to use Heat through CLI commands, Python must be installed and its virtual environment activated. See article [How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](../cloud/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html).
+If you want to use Heat through CLI commands, Python must be installed and its virtual environment activated. See article [How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](../cloud/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html.md).
 
-If you have never installed one of the OpenStack clients, see :[How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](../kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html).
+If you have never installed one of the OpenStack clients, see :[How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](../kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md).
 
 Always use the latest value of image id[](#always-use-the-latest-value-of-image-id "Permalink to this headline")
 -----------------------------------------------------------------------------------------------------------------
@@ -279,7 +279,7 @@ The first step is to create a real volume (called VOL\_FAQ) and the second is to
 :   Property to define a bootable Cinder volume for instance.
 
 **outputs**
-:   Additional information concerning deployed elements of the stack. In this case it returns a “show” attribute output. You can examine this kind of information by using openstack stack output list. Available attributes for every component [can be found here.](https://docs.openstack.org/heat/latest/template_guide/openstack.html).
+:   Additional information concerning deployed elements of the stack. In this case it returns a “show” attribute output. You can examine this kind of information by using openstack stack output list. Available attributes for every component [can be found here.](https://docs.openstack.org/heat/latest/template_guide/openstack.html.md).
 
 Execute the template with the following command:
 

docs/openstackcli/How-to-create-instance-snapshot-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md

@@ -37,13 +37,13 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 No. 2 **Ephemeral storage vs. persistent storage**
 
-Please see article [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](../datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html) to understand the basic difference between ephemeral and persistent types of storage in OpenStack.
+Please see article [Ephemeral vs Persistent storage option Create New Volume on CloudFerro Cloud](../datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-CloudFerro-Cloud.html.md) to understand the basic difference between ephemeral and persistent types of storage in OpenStack.
 
 No. 3 **Instance with ephemeral storage**
 
 You need a virtual machine hosted on CloudFerro Cloud cloud.
 
-You can create an instance with ephemeral storage by following this article: [How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html)
+You can create an instance with ephemeral storage by following this article: [How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html.md)
 
 The actual command used to create an instance from that article was
 
@@ -115,7 +115,7 @@ If you want to learn how to delete instances, snapshots, volumes and other OpenS
 
 /networking/How-to-correctly-delete-all-the-resources-in-the-project-via-OpenStack-commandline-Clients-on-CloudFerro-Cloud.
 
-[How to create or delete volume snapshot on CloudFerro Cloud](../datavolume/How-to-create-or-delete-volume-snapshot-on-CloudFerro-Cloud.html).
+[How to create or delete volume snapshot on CloudFerro Cloud](../datavolume/How-to-create-or-delete-volume-snapshot-on-CloudFerro-Cloud.html.md).
 
 No. 6 **OpenStack CLI client**
 

docs/openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html.md

@@ -3,7 +3,7 @@ How to install OpenStackClient GitBash for Windows on CloudFerro Cloud[](#how
 
 In this tutorial, you start with a standard Windows installation, then install the OpenStack CLI client and end up connecting to your project on CloudFerro Cloud cloud.
 
-> For another way of installing OpenStack CLI on Windows, see article [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html). However:
+> For another way of installing OpenStack CLI on Windows, see article [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html.md). However:
 
 * using Git Bash is simpler than using Windows Subsystem for Linux and is
 * providing a more straightforward access to your local file system.
@@ -287,18 +287,18 @@ You can also create a batch file to automate reentering the Python environment.
 What To Do Next[](#what-to-do-next "Permalink to this headline")
 -----------------------------------------------------------------
 
-The article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](../kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html) will give you another procedure to install CLI and connect it to the cloud. It also contains several examples of using the CLI commands.
+The article [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](../kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md) will give you another procedure to install CLI and connect it to the cloud. It also contains several examples of using the CLI commands.
 
 Other articles of interest:
 
-[How to Create and Configure New Openstack Project Through Horizon on CloudFerro Cloud Cloud](How-To-Create-and-Configure-New-Project-on-CloudFerro-Cloud-Cloud.html)
+[How to Create and Configure New Openstack Project Through Horizon on CloudFerro Cloud Cloud](How-To-Create-and-Configure-New-Project-on-CloudFerro-Cloud-Cloud.html.md)
 
-[How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html)
+[How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html.md)
 
 Using CLI interface for Kubernetes clusters:
 
-[How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)
 
 Also see
 
-[How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html)
+[How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md)

docs/openstackcli/How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html.md

@@ -28,7 +28,7 @@ Your computer must be running Microsoft Windows. This article is written for Win
 
 No. 3 **Optional – software for 2FA authentication**
 
-Your account at CloudFerro Cloud cloud may have two-factor authentication enabled. It means that apart from the usual username and password combination, you also need software to generate the TOTP – the six-digit code for the additional, second step of authentication. This article will provide additional technical details: [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html).
+Your account at CloudFerro Cloud cloud may have two-factor authentication enabled. It means that apart from the usual username and password combination, you also need software to generate the TOTP – the six-digit code for the additional, second step of authentication. This article will provide additional technical details: [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md).
 
 Step 1: Check the version of Windows[](#step-1-check-the-version-of-windows "Permalink to this headline")
 ----------------------------------------------------------------------------------------------------------
@@ -294,12 +294,12 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 After installing the OpenStack CLI client and activating your new RC file, you can use other articles to perform operations on CloudFerro Cloud cloud:
 
-[How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html)
+[How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html.md)
 
-[Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html)
+[Generating and authorizing Terraform using Keycloak user on CloudFerro Cloud](../openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md)
 
-[How to upload your custom image using OpenStack CLI on CloudFerro Cloud](../cloud/How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html)
+[How to upload your custom image using OpenStack CLI on CloudFerro Cloud](../cloud/How-to-upload-your-custom-image-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
 
-[How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html)
+[How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html.md)
 
-[How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html)
+[How To Use Command Line Interface for Kubernetes Clusters On CloudFerro Cloud OpenStack Magnum](../kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-CloudFerro-Cloud-OpenStack-Magnum.html.md)

docs/openstackcli/How-to-share-private-container-from-object-storage-to-another-user-on-CloudFerro-Cloud.html.md

@@ -18,19 +18,19 @@ You need a CloudFerro Cloud hosting account with Horizon interface <https://hori
 
 No. 2 **OpenStack client installed and connected to the cloud**
 
-The following article will help you install Python and OpenStack client called **openstack** and will also help you connect to the cloud [How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html)).
+The following article will help you install Python and OpenStack client called **openstack** and will also help you connect to the cloud [How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)).
 
 No. 3 **Knowledge of downloading and working with RC files**
 
 To be able to share private containers, you will have to manipulate RC files from the cloud. The following article will provide technical details:
 
-[How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html)
+[How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md)
 
 No. 4. **Using OpenStack Swift module**
 
 The OpenStack Object Store module, known as *Swift*, allows you to store and retrieve data with a simple API. It’s built for scale and is optimized for durability, availability, and concurrency across the entire data set. Swift is ideal for storing unstructured data that can grow without bound.
 
-See [How to access object storage using OpenStack CLI on CloudFerro Cloud](How-to-access-object-storage-using-OpenStack-CLI-on-CloudFerro-Cloud.html)
+See [How to access object storage using OpenStack CLI on CloudFerro Cloud](How-to-access-object-storage-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
 
 Setting up the test example[](#setting-up-the-test-example "Permalink to this headline")
 -----------------------------------------------------------------------------------------
@@ -377,6 +377,6 @@ What To Do Next[](#what-to-do-next "Permalink to this headline")
 
 These articles can also be of interest:
 
-[How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html).
+[How to use Object Storage on CloudFerro Cloud](../s3/How-to-use-Object-Storage-on-CloudFerro-Cloud.html.md).
 
-[Bucket sharing using s3 bucket policy on CloudFerro Cloud](../s3/Bucket-sharing-using-s3-bucket-policy-on-CloudFerro-Cloud.html)
+[Bucket sharing using s3 bucket policy on CloudFerro Cloud](../s3/Bucket-sharing-using-s3-bucket-policy-on-CloudFerro-Cloud.html.md)

docs/openstackcli/Resizing-a-virtual-machine-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md

@@ -25,11 +25,11 @@ You need a CloudFerro Cloud hosting account with access to the Horizon interface
 
 If you are a normal user of CloudFerro Cloud hosting, you will have all prerogatives needed to resize the VM. Make sure that the VM you are about to resize belongs to a project you have access to.
 
-[How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html)
+[How to create a VM using the OpenStack CLI client on CloudFerro Cloud cloud](../cloud/How-to-create-a-VM-using-the-OpenStack-CLI-client-on-CloudFerro-Cloud-cloud.html.md)
 
 No. 2 **Awareness of existing quotas and flavors limits**
 
-For general introduction to quotas and flavors, see [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](../cloud/Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html).
+For general introduction to quotas and flavors, see [Dashboard Overview – Project Quotas And Flavors Limits on CloudFerro Cloud](../cloud/Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-CloudFerro-Cloud.html.md).
 
 Also:
 

docs/openstackcli/openstackcli.html.md

@@ -1,2 +1,19 @@
-OPENSTACK CLI[](#openstack-cli "Permalink to this headline")
+# OpenStack CLI
-=============================================================
+
+## Available Documentation
+
+* [How To Create and Configure New Project on CloudFerro Cloud Cloud](How-To-Create-and-Configure-New-Project-on-CloudFerro-Cloud-Cloud.html.md)
+* [How to access object storage using OpenStack CLI on CloudFerro Cloud](How-to-access-object-storage-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
+* [How to backup an instance and download it to the desktop on CloudFerro Cloud](How-to-backup-an-instance-and-download-it-to-the-desktop-on-CloudFerro-Cloud.html.md)
+* [How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html.md)
+* [How to create instance snapshot using OpenStack CLI on CloudFerro Cloud](How-to-create-instance-snapshot-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
+* [How Git Bash terminal commands differ from those in Windows[](#how-git-bash-terminal-commands-differ-from-those-in-windows "Permalink to this headline")](How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-CloudFerro-Cloud.html.md)
+* [How to install OpenStackClient for Linux on CloudFerro Cloud](How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)
+* [How to install OpenStackClient on Windows using Windows Subsystem for Linux on CloudFerro Cloud OpenStack Hosting](How-to-install-OpenStackClient-on-Windows-using-Windows-Subsystem-for-Linux-on-CloudFerro-Cloud-OpenStack-Hosting.html.md)
+* [How to move data volume between two VMs using OpenStack CLI on CloudFerro Cloud](How-to-move-data-volume-between-two-VMs-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
+* [To use an OpenStack cloud you need to authenticate against the Identity](How-to-share-private-container-from-object-storage-to-another-user-on-CloudFerro-Cloud.html.md)
+* [How to start a VM from instance snapshot using OpenStack CLI on CloudFerro Cloud](How-to-start-a-VM-from-instance-snapshot-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
+* [How to transfer volumes between domains and projects using OpenStack CLI client on CloudFerro Cloud](How-to-transfer-volumes-between-domains-and-projects-using-OpenStack-CLI-client-on-CloudFerro-Cloud.html.md)
+* [Resizing a virtual machine using OpenStack CLI on CloudFerro Cloud](Resizing-a-virtual-machine-using-OpenStack-CLI-on-CloudFerro-Cloud.html.md)
+* [Use backup command to create rotating backups of virtual machines on CloudFerro Cloud](Use-backup-command-to-create-rotating-backups-of-virtual-machines-on-CloudFerro-Cloud.html.md)
+* [Use script to create daily weekly and monthly rotating backups of virtual machines using on CloudFerro Cloud](Use-script-to-create-daily-weekly-and-monthly-rotating-backups-of-virtual-machines-using-on-CloudFerro-Cloud.html.md)

docs/openstackdev/Authenticating-to-OpenstackSDK-using-Keycloak-Credentials-on-CloudFerro-Cloud.html.md

@@ -20,11 +20,11 @@ Prerequisites[](#prerequisites "Permalink to this headline")
 
 **No. 1 Install Python and its environment**
 
-The following article will help you install Python and **pip**, as well as **Venv**: [How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](../cloud/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html).
+The following article will help you install Python and **pip**, as well as **Venv**: [How to install Python virtualenv or virtualenvwrapper on CloudFerro Cloud](../cloud/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-CloudFerro-Cloud.html.md).
 
 **No. 2 RC File**
 
-RC file is available from the OpenStack Horizon module and serves as a source of authentication for the user. For technical details how to get it and activate, see [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](../kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html).
+RC file is available from the OpenStack Horizon module and serves as a source of authentication for the user. For technical details how to get it and activate, see [How To Install OpenStack and Magnum Clients for Command Line Interface to CloudFerro Cloud Horizon](../kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-CloudFerro-Cloud-Horizon.html.md).
 
 Step 1 Source Your RC File[](#step-1-source-your-rc-file "Permalink to this headline")
 ---------------------------------------------------------------------------------------

docs/openstackdev/Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md

@@ -36,19 +36,19 @@ No. 2 **Installed version of Linux**
 
 You can use your current Linux installation, however, in this article we shall start with a clean slate. Create a new VM with Ubuntu as defined in this article:
 
-[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html).
+[How to create a Linux VM and access it from Linux command line on CloudFerro Cloud](../cloud/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-CloudFerro-Cloud.html.md).
 
 No. 3 **Installed OpenStackClient for Linux**
 
 To get token from the cloud, you will first need to enable access from the Ubuntu VM you just created:
 
-[How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html)
+[How to install OpenStackClient for Linux on CloudFerro Cloud](../openstackcli/How-to-install-OpenStackClient-for-Linux-on-CloudFerro-Cloud.html.md)
 
 It will show you how to install Python, create and activate a virtual environment, and then connect to the cloud by downloading and activating the proper RC file from the CloudFerro Cloud cloud.
 
 No. 4 **Connect to the cloud via an RC file**
 
-Another article, [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html), deals with connecting to the cloud and is covering either of the one- or two-factor authentication procedures that are enabled on your account. It also covers all the main platforms: Linux, MacOS and Windows.
+Another article, [How to activate OpenStack CLI access to CloudFerro Cloud cloud using one- or two-factor authentication](../accountmanagement/How-to-activate-OpenStack-CLI-access-to-CloudFerro-Cloud-cloud-using-one-or-two-factor-authentication.html.md), deals with connecting to the cloud and is covering either of the one- or two-factor authentication procedures that are enabled on your account. It also covers all the main platforms: Linux, MacOS and Windows.
 
 You will use both the Python virtual environment and the downloaded RC file **after** Terraform has been installed.
 
@@ -342,4 +342,4 @@ to learn other commands Terraform can offer.
 What To Do Next[](#id1 "Permalink to this headline")
 -----------------------------------------------------
 
-Article [How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](../openstackcli/How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html) uses orchestration capabilities of OpenStack to automate creation of virtual machines. It is a different approach compared to Terraform but both can lead to automation under OpenStack.
+Article [How to create a set of VMs using OpenStack Heat Orchestration on CloudFerro Cloud](../openstackcli/How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-CloudFerro-Cloud.html.md) uses orchestration capabilities of OpenStack to automate creation of virtual machines. It is a different approach compared to Terraform but both can lead to automation under OpenStack.

docs/openstackdev/openstackdev.html.md

@@ -1,2 +1,6 @@
-OPENSTACK DEV[](#openstack-dev "Permalink to this headline")
+# OpenStack Development
-=============================================================
+
+## Available Documentation
+
+* [Authenticating to OpenstackSDK using Keycloak Credentials on CloudFerro Cloud](Authenticating-to-OpenstackSDK-using-Keycloak-Credentials-on-CloudFerro-Cloud.html.md)
+* [Enter root mode](Generating-and-authorizing-Terraform-using-Keycloak-user-on-CloudFerro-Cloud.html.md)

docs/s3/Bucket-sharing-using-s3-bucket-policy-on-CloudFerro-Cloud.html.md

@@ -40,7 +40,7 @@ Ceph S3 implementation
 S3cmd CONFIGURATION[](#s3cmd-configuration "Permalink to this headline")
 -------------------------------------------------------------------------
 
-To share bucket using S3 bucket policy you have to configure s3cmd first using this tutorial [How to access private object storage using S3cmd or boto3 on CloudFerro Cloud](How-to-access-private-object-storage-using-S3cmd-or-boto3-on-CloudFerro-Cloud.html)
+To share bucket using S3 bucket policy you have to configure s3cmd first using this tutorial [How to access private object storage using S3cmd or boto3 on CloudFerro Cloud](How-to-access-private-object-storage-using-S3cmd-or-boto3-on-CloudFerro-Cloud.html.md)
 
 Declaring bucket policy[](#declaring-bucket-policy "Permalink to this headline")
 ---------------------------------------------------------------------------------