This PR refactors all the dropdown content wrapping mechanism across the
entire app.
It refactors the internals of the `Dropdown` component and introduces a
new generic `DropdownContent` component that is a generic wrapper used
for each dropdown.
## Why this PR ?
Because we’ve been experiencing continuous regressions for months on the
dropdown content width, with weird scrolling behaviors in some and not
in others, and every time a solution was found for a particular set of
dropdowns, it broke another set of dropdowns, which wasn’t noticed
because doing the QA of all dropdowns of the app is very difficult for
fixing an apparently small bug.
## Don’t we already have a `DropdownMenu` component ?
Indeed, this new `DropdownContent` is almost like `DropdownMenu` and
took inspiration from it but `DropdownContent` acts as a generic content
container that sets the width of the whole dropdown, whether we have a
menu or not.
## Why don’t we put it directly in Dropdown internals ?
Because the Dropdown component is using a complex logic with floating-ui
middleware to compute its position and size, and for this logic to work
correctly, it cannot be responsible for the “wanted” width of its
content, because the children components, which the dropdown is not
aware of, can request different widths after the dropdown has been
mounted.
A good example with multiple use cases inside the same dropdown can be
found in `AdvancedFilterDropdownFilterInput`
Thus, it is the responsibility of the content of the dropdown to
determine the width it wants to have.
## What is the difference with DropdownMenuItemsContainer ?
We can have multiple `DropdownMenuItemsContainer` in a dropdown,
alongside other components like `DropdownMenuSeparator` or
`DropdownMenuHeader`, and each of those components behaves differently
regarding to its width, paddings, etc. Therefore it is logical that the
`DropdownMenuItemsContainer` cannot be responsible for the whole
dropdown content width, and trying to do so has been the cause of many
regressions for months.
Now `DropdownMenuItemsContainer` is taking a width of `auto` by default,
which is the best to adapt to a parent which has a defined width.
## How do I set the width of my dropdown now ?
By passing a pixel width to the props `widthInPixels` of
`DropdownContent`, which only accepts numbers to avoid any confusion
with `auto` , `100%` or `160px` and other specific width variables.
The `dropdownWidth` props has been removed from `<Dropdown>` to avoid
any confusion.
Also the `DropdownMenuItemsContainer` is now using `auto` as its default
width to fill the available space inside `DropdownContent` .
It is highly recommended to use the enum `GenericDropdownContentWidt` to
define your width.
## Where to use this new `DropdownContent` component ?
There are two main use cases.
If the dropdown content is defined directly inline in the Dropdown
props, then it is recommended to use it here too.
On the other hand if the dropdown content is abstracted in another
component, it’s recommended to use this new component alongside the
others components like `DropdownMenuItemsContainer`.
A good rule of thumb is to place `DropdownContent` where
`DropdownMenuItemsContainer`, `DropdownMenuSearchInput`, etc. are
placed.
## What if I have a custom width ?
Just define a constant like `ICON_PICKER_DROPDOWN_CONTENT_WIDTH` and use
it with the props `widthInPixels` .
Otherwise there’s a `GenericDropdownContentWidth` enum. The default
value being `GenericDropdownContentWidth.Medium` (or 200px), which most
dropdowns use.
## QA
Component | Comment
-- | --
AttachmentDropdown | Fixed overflowing (thanks to DropdownContent)
RecordIndexActionMenuDropdown |
CommandMenuActionMenuDropdown |
SupportDropdown | Fixed overflowing (thanks to DropdownContent)
MessageThreadSubscribersDropdownButton | Removed because unused
FavoriteFolderNavigationDrawerItemDropdown | Set width at Narrow
FavoriteFolderPicker |
ViewPickerOptionDropdown |
PageFavoriteFolderDropdown | Removed because unused
AdvancedFilterAddFilterRuleSelect |
AdvancedFilterAddFilterRuleSelect |
AdvancedFilterFieldSelectMenu |
AdvancedFilterRecordFilterGroupOptionsDropdown |
AdvancedFilterRecordFilterOperanceSelect | Set width at Narrow
AdvancedFilterLogicalOperatorDropdown | Set width at Narrow
AdvancedFilterRecordFilterOptionsDropdown |
AdvancedFilterRootRecordFilterGroup | Fixed broken horizontal scrolling
behavior
AdvancedFilterSubFieldSelectMenu |
AdvancedFilterDropdownFilterInput |
ObjectFilterDropdownBooleanSelect |
ObjectFilterDropdownCountrySelect | Fixed broken menu items container
ObjectFilterDropdownCurrencySelect | Set width to Large
ObjectFilterDropdownFilterInput |
ObjectFilterDropdownOperandDropdown | Fixed width that was not fixed
ObjectFilterDropdownFilterInput | Fixed width that wasn’t the same for
EditableFilterChip
ObjectFilterDropdownOperandSelect | Refactored
ObjectOptionsDropdownRecordGroupFieldsContent | Added missing separator
ObjectOptionDropdownFieldsContent |
ObjectOptionsDropdownHiddenFieldsContent |
ObjectOptionsDropdownLayoutContent |
ObjectOptionsDropdownLayoutOpenInContent |
ObjectOptionsDropdownMenuContent |
ObjectOptionsDropdownRecordGroupFieldsContent |
ObjectOptionsDropdownRecordGroupsContent |
ObjectOptionsDropdownRecordGroupSortContent |
ObjectOptionsDropdownHiddenRecordGroupsContent | Removed unnecessary
DropdownMenuItemsContainer
RecordBoardColumnHeaderAggregateDropdown | Fixed overflowing (thanks to
DropdownContent)
RecordBoardColumnHeaderAggregateDropdownFieldsContent | Fixed
overflowing (thanks to DropdownContent)
RecordBoardColumnHeaderAggregateDropdownMenuContent | Fixed overflowing
(thanks to DropdownContent)
RecordBoardColumnHeaderAggregateDropdownOptionsContent | Fixed
overflowing (thanks to DropdownContent)
MultiItemFieldInput | Fixed overflowing (thanks to DropdownContent)
MultiItemFieldMenuItem |
MultipleRecordPicker | Fixed overflowing (thanks to DropdownContent)
SingleRecordPicker |
RecordTableColumnAggregateDropdownSubmenuContent |
RecordTableColumnAggregateFooterMenuContent |
RecordTableColumnHeadDropdownMenu | Fixed overflowing (thanks to
DropdownContent)
RecordTableHeaderPlusButtonContent |
MultipleSelectDropdown | Broken width fixed
ObjectSortDropdownButton |
RecordDetailRelationRecordsListItem |
ConfigVariableDatabaseInput |
ConfigVariableOptionsDropdownContent |
SettingsObjectFieldActiveActionDropdown | Fixed overflowing (thanks to
DropdownContent)
SettingsObjectFieldDisabledActionDropdown | Set width at Narrow
SettingsObjectSummaryCard | Removed because unused
SettingsDataModelFieldSelectFormOptionRow |
SettingsDataModelNewFieldBreadcrumbDropdown |
SettingsObjectInactiveMenuDropDown |
SettingsRoleAssignementWorkspaceMemberPickerDropdown |
SettingsRolePermissionObjectLevelObjectPickerDropdownContent |
SettingsSecurityApprovedAccessDomainRowDropdownMenu | Couldn’t test
SettingsSecuritySSORowDropdownMenu | Couldn’t test
SettingsAccountsRowDropdownMenu | Fixed overflowing (thanks to
DropdownContent)
SettingsIntegrationDatabaseConnectionSummaryCard | Couldn’t test
SettingsServerlessFunctionTablEnvironmentVariableTableRow | Deactivated
scope
MatchColumnSelectFieldSelectDropdownContent | Removed now unnecessary
width on DropdownMenuItemsContainer
MatchColumnSelectSubFieldSelectDropdownContent |
SubMatchingSelectInput |
CurrencyPickerDropdownSelect |
IconPicker | Fixed overflowing (thanks to DropdownContent)
PhoneCountryPickerDropdownSelect |
Select | Refactored to drilldown wanted width of content, in this case
it’s intended
ExpandedListDropdown |
ShowPageAddButton | Removed because unused
MultiWorkspaceDropdownDefaultComponent |
MultiWorkspaceDropdownThemesComponent |
MultiWorkspaceDropdownWorkspacesListComponent |
AdvancedFilterDropdownButton |
EditableFilterChip |
EditableFilterDropdownButton |
UpdateViewButtonGroup |
ViewBarFilterDropdown |
ViewBarFilterDropdownFieldSelectMenu |
ViewPickerContentCreateMode |
ViewPickerContentEditMode |
ViewPickerListContent |
WorkflowEditTriggerDatabaseEventForm |
WorkflowVariablesDropdownFieldItems |
WorkflowVariablesDropdownObjectItems |
WorkflowVariablesDropdownWorkflowStepItems |
CommandMenuContextChipGroups |
RecordBoardColumnDropdownMenu |
MultiSelectInput |
SelectInput |
CustomSlashMenu |
DropdownMenu | Removed and replaced by DropdownContent
OverlayContainer and around |
<!-- notionvc: 1e23bdb8-2dda-4f8d-a64d-ecc829a768a2 -->
## Miscellaneous
Side notes :
- The `Select` component is now wrapping the `DropdownContent` because
it computes a dynamic width.
- The advanced filter dropdown has been fixed, it was broken when
resizing the window horizontally, we couldn’t scroll. This specific edge
case was taken into account when refactoring the whole dropdown content
system
- As discussed with Nitin, data-select-disable will probably be removed
entirely, so I let it as is, because right now it is not used by the
refactored d&d selection.
- Duplicate separators under DropdownMenuHeader have been removed.
Fixes : https://github.com/twentyhq/twenty/issues/12327
Fixes : https://github.com/twentyhq/core-team-issues/issues/951
follow up #12033
in #12033, SettingsDataModelFieldRelationForm I changed the the use of
objectMetadataItems to activeObjectMetadataItems, which filtered out
system objects. The naming was one factor for this confusion
Renaming it everywhere to specify that they don't include system objects
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
- Migrated all workflow Recoil states to component states to isolate
each workflow visualizer instance. The use case of having two workflow
visualizers displayed at the same time appeared recently and will grow
in the near future.
- We chose to use the `recordId` as the value for the `instanceId` of
the component states. Currently, there are a few cases where two
workflows or two workflow runs are rendered at the same time. As a
consequence, relying on the `recordId` is enough for the moment.
- However, there is one case where it's necessary to have a component
state scoped to a workflow visualizer instance: the
`workflowVisualizerStatusState`. This component is tightly coupled to
the `<Reactflow />` component instance rendered in the workflow
visualizer, and it must be set to its default value when the component
first renders. I achieved that by using another component instance
context whose instanceId is an identifier returned by the `useId()` hook
in the Workflow Run Card component.
> [!WARNING]
> I refactored a bunch of components into utility functions to make it
possible to display the `WorkflowStepHeader` component for **triggers**
in the `CommandMenuWorkflowRunViewStep` component. Previously, we were
asserting that we were displaying the header in `Output` and `Input`
tabs only for **actions**. Handling triggers too required a bunch of
changes. We can think of making a bigger refactor of this part.
In this PR:
- Only display the Flow for Workflow Runs; removed the Code Editor tab
- Allows users to see the Output of trigger nodes
- Prevent impossible states by manually setting the selected tab when
selecting a node
## Demo
### Success, Running and Not Executed steps
https://github.com/user-attachments/assets/c6bebd0f-5da2-4ccc-aef2-d9890eafa59a
### Failed step
https://github.com/user-attachments/assets/e1f4e13a-2f5e-4792-a089-928e4d6b1ac0
Closes https://github.com/twentyhq/core-team-issues/issues/709
This PR was originally about fixing advanced filter dropdown auto resize
to avoid breaking the app main container, but the regression is not
limited to advanced filter dropdown, so this PR fixes the regression for
every dropdown in the app.
This PR adds a max dropdown max width to allow resizing dropdowns
horizontally also, which can happen easily for the advanced filter
dropdown.
In this PR we also start removing `fieldMetadataItemUsedInDropdown` in
component `AdvancedFilterDropdownTextInput` because it has no impact
outside of this component which is used only once.
The autoresize behavior determines the right padding-bottom between
mobile and PC.
Mobile :
<img width="604" alt="Capture d’écran 2025-04-07 à 16 03 12"
src="https://github.com/user-attachments/assets/fbdd8020-1bfc-4e01-8a05-3a9f114cdd40"
/>
PC :
<img width="757" alt="Capture d’écran 2025-04-07 à 16 03 30"
src="https://github.com/user-attachments/assets/f80a5967-8f60-40bb-ae3c-fa9eb4c65707"
/>
Fixes https://github.com/twentyhq/core-team-issues/issues/725
Fixes https://github.com/twentyhq/twenty/issues/11409
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
# Introduction
closes https://github.com/twentyhq/core-team-issues/issues/591
Same than for `twenty-shared` made in
https://github.com/twentyhq/twenty/pull/11083.
## TODO
- [x] Manual migrate twenty-website twenty-ui imports
## What's next:
- Generate barrel and migration script factorization within own package
+ tests
- Refactoring using preconstruct ? TimeBox
- Lint circular dependencies
- Lint import from barrel and forbid them
### Preconstruct
We need custom rollup plugins addition, but preconstruct does not expose
its rollup configuration. It might be possible to handle this using the
babel overrides. But was a big tunnel.
We could give it a try afterwards ! ( allowing cjs interop and stuff
like that )
Stuck to vite lib app
Closed related PRs:
- https://github.com/twentyhq/twenty/pull/11294
- https://github.com/twentyhq/twenty/pull/11203
Fixes#11310
Note:
- I changed "system to advanced" because I think we will link that to
the Advanced Mode in the future
- Not sure when to use useCallback / useMemo, AI added some useCallbacks
which I removed but I left some useMemo... Not sure what should be the
rule
- It had to use MenuItem because this sub-menu behavior wasn't available
in the Standard select component. We should probably rename the
"MenuItem" elements to something more generic. I didn't do it in this PR
because I'm not sure about the strategy and it would change a lot of
files.
Mostly renaming objects to avoid conflicts (it was painful because names
were too generic so you could cmd+replace easily)
Also refactoring `useBuildAvailableFieldsForImport`
# Introduction
In this PR we've migrated `twenty-shared` from a `vite` app
[libary-mode](https://vite.dev/guide/build#library-mode) to a
[preconstruct](https://preconstruct.tools/) "atomic" application ( in
the future would like to introduce preconstruct to handle of all our
atomic dependencies such as `twenty-emails` `twenty-ui` etc it will be
integrated at the monorepo's root directly, would be to invasive in the
first, starting incremental via `twenty-shared`)
For more information regarding the motivations please refer to nor:
- https://github.com/twentyhq/core-team-issues/issues/587
-
https://github.com/twentyhq/core-team-issues/issues/281#issuecomment-2630949682
close https://github.com/twentyhq/core-team-issues/issues/589
close https://github.com/twentyhq/core-team-issues/issues/590
## How to test
In order to ease the review this PR will ship all the codegen at the
very end, the actual meaning full diff is `+2,411 −114`
In order to migrate existing dependent packages to `twenty-shared` multi
barrel new arch you need to run in local:
```sh
yarn tsx packages/twenty-shared/scripts/migrateFromSingleToMultiBarrelImport.ts && \
npx nx run-many -t lint --fix -p twenty-front twenty-ui twenty-server twenty-emails twenty-shared twenty-zapier
```
Note that `migrateFromSingleToMultiBarrelImport` is idempotent, it's atm
included in the PR but should not be merged. ( such as codegen will be
added before merging this script will be removed )
## Misc
- related opened issue preconstruct
https://github.com/preconstruct/preconstruct/issues/617
## Closed related PR
- https://github.com/twentyhq/twenty/pull/11028
- https://github.com/twentyhq/twenty/pull/10993
- https://github.com/twentyhq/twenty/pull/10960
## Upcoming enhancement: ( in others dedicated PRs )
- 1/ refactor generate barrel to export atomic module instead of `*`
- 2/ generate barrel own package with several files and tests
- 3/ Migration twenty-ui the same way
- 4/ Use `preconstruct` at monorepo global level
## Conclusion
As always any suggestions are welcomed !
Closes https://github.com/twentyhq/core-team-issues/issues/271
This PR
- Removes the feature flag IS_COMMAND_MENU_V2_ENABLED
- Removes all old Right drawer components
- Removes the Action menu bar
- Removes unused Copilot page
This PR follows #10700, it is the same refactor but for the workflows
pages.
- Duplicates the right drawer workflow pages for the command menu and
replace the states used in these pages by component states
- We store the component instance id upon navigation to restore the
states when we navigate back to a page
There are still states which are not component states inside the
workflow diagram and workflow command menu pages, we should convert them
in a futur refactor.
`closeCommandMenu` was called programmatically in multiple places for
the workflow, I refactored that to only rely on the click outside
listener. This introduced a wiggling bug on the workflow canvas when we
change node selection. This should be fixed in another PR by updating
the canvas animation to take the animation values of the command menu
instead. I'm thinking we could use [motion
values](https://motion.dev/docs/react-motion-value) for this as I told
you @Devessier
This PR essentially removes the usage of filterDefinition.type, by
replacing it with fieldMetadataItem.type derivation. Thus allowing to
completely remove filterDefinition later on.
In computeFilterRecordGqlOperationFilter, emptyOperationFilter is now
returned before going into the big switch case. This avoids repeating
the same exact call to getEmptyRecordGqlOperationFilter for each type.
Fixed some tests that need
getJestMetadataAndApolloMocksAndActionMenuWrapper to have record filters
properly working with the new implementation. We'll probably want to
refactor the record context store, record index context, etc.
Co-authored-by: Charles Bochet <charlesBochet@users.noreply.github.com>
# Introduction
Avoid having multiple `isDefined` definition across our pacakges
Also avoid importing `isDefined` from `twenty-ui` which exposes a huge
barrel for a such little util function
## In a nutshell
Removed own `isDefined.ts` definition from `twenty-ui` `twenty-front`
and `twenty-server` to move it to `twenty-shared`.
Updated imports for each packages, and added explicit dependencies to
`twenty-shared` if not already in place
Related PR https://github.com/twentyhq/twenty/pull/9941
- remove delete serverless function when archiving workflow version
- update copy serverless function to reset serverless function to old
version
- remove createNewWorkflowVersion and use createDraftFromWorkflowVersion
- fix step update issue and optimistic rendering when generate draft
from active version
