## What
- Deprecate overlayscrollbars as we decided to follow the native
behavior
- rework on performances (avoid calling recoil states too much at field
level which is quite expensive)
- Also implements:
https://github.com/twentyhq/core-team-issues/issues/569
---------
Co-authored-by: Lucas Bordeau <bordeau.lucas@gmail.com>
Advanced mode toggle was in `twenty-ui` which doesn't support Lingui.
I removed lingui from the global package json and moved it to the local
package.json instead to prevent that kind of error from happening again
## Introduction
This is PR is a suggestion ! And should be discussed
With yarn `^4`, during installation won't raise an error if current dev
env does not satisfies the `engines` policy.
We have usually 10+ contributors support request regarding higher node
version issue per week
I would have preferred a very declarative integration using npm
[engines](https://docs.npmjs.com/cli/v11/configuring-npm/package-json#engines)
but this does not seems to be natively supported by `yarn`
We should keep in mind that this might block any machines from our CICD
if they have diff node version installed ( such as running the project
on a different node version could result in bugs too )
## Implem
Created a yarn [constraints](https://yarnpkg.com/features/constraints)
run after each installation that checking if current node version
satisfies defined engines range ( might also be done for others engines
entries )
I assume we will always have the same engines policy for every packages,
at least that's not a consideration from now
## Further
We could refactor our package.json engines into only one using
`Yarn.set` etc
## Resource
- https://yarnpkg.com/configuration/yarnrc
- https://yarnpkg.com/features/constraints
## Note
- Not running constraints in `preInstall` hook as won't be effective on
fresh install
-
[engine-strict](https://docs.npmjs.com/cli/v8/using-npm/config#engine-strict)
is an npm-config
-
[devEngines](https://docs.npmjs.com/cli/v11/configuring-npm/package-json#devengines)
are npm feature too ( for instance pnpm current PR
https://github.com/pnpm/pnpm/issues/8153 )
## Conclusion
As always any suggestions are more than welcomed !
# Health Monitoring for Self-Hosted Instances
This PR implements basic health monitoring for self-hosted instances in
the admin panel.
## Service Status Checks
We're adding real-time health checks for:
- Redis Connection
- Database Connection
- Worker Status
- Message Sync Status
## Existing Functionality
We already have message sync and captcha counters that store aggregated
metrics in cache within a configurable time window (default: 5 minutes).
## New Endpoints
1. `/healthz` - Basic server health check for Kubernetes pod monitoring
2. `/healthz/{serviceName}` - Individual service health checks (returns
200 if healthy)
3. `/metricsz/{metricName}` - Time-windowed metrics (message sync,
captcha)
4. GraphQL resolver in admin panel for UI consumption
All endpoints use the same underlying service, with different
presentation layers for infrastructure and UI needs.
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
We are using useInView to detect if a row should be rendered or not.
# Behavior issue
When browsing an Index page (let's say People), then navigating to
another one (Company), then back to People, the rows were not displayed
anymore. For some reason the inView value was set to false in this case
# Fix
- I have updated the useInView (react-intersection-observer) package but
it did not fix it
- useInView provides a ref. However, I believe this was conflicting with
the draggableRef; cecause we are in a <table> we cannot add additional
containers and are forced to apply both refs to the <tr> (draggableRef +
inViewRef). I believe this was causing the issue. I have added the
inView ref to an empty <td> within the row which is achieving the same
goal without forcing to combine refs
- Do not render a source handle for the leaf nodes
- Upgrade the `@xyflow/react` library
| Before | After |
|--------|--------|
| 
| 
|
## Other options considered
React Flow exposes a hook to get the connections of the current node. I
tried to use this hook – which makes things way simpler – but I couldn't
find a way to make it work in Storybook. I had two options: 1. Set up
React Flow to render the nodes properly, 2. Mock the hook in Storybook.
The first option was hard to achieve as the `<Reactflow />` component
renders a whole flow, and it doesn't play well with the idea of
rendering a single node in a story.
The second option seemed overkill as mocking modules with Storybook is
not straightforward. See
https://storybook.js.org/docs/writing-stories/mocking-data-and-modules/mocking-modules.
I chose to keep the initial version of my code, written before I spot a
function simplifying the code. We can give it a look another time.
One of the steps to address #8128
How to test:
Please change the locale in the settings and click on change password
button. A password reset email in the preferred locale will be sent.
Todo:
- Remove the hardcoded locales for invitation, warn suspended workspace
email, clean suspended workspace emails
- Need to test invitation, email verification, warn suspended workspace
email, clean suspended workspace emails
- The duration variable `5 minutes` is always in english. Do we need to
do something about that? It does seems odd in case of chinese
translations.
Notes:
- Only tested the password reset , password update notify templates.
- Cant test email verification due to error during sign up `Internal
server error: New workspace setup is disabled`
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
Refers #8128
Changes Introduced:
- Added i18n configuration.
- Added a feature flag for localization.
- Enabled language switching based on the flag.
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
Closes#8439
## Overview
This PR implements functionality to export notes/tasks to PDF and Word
formats.
https://github.com/user-attachments/assets/67eaf4eb-cabc-45ba-8727-13f22ba31067
## Testing
- [x] Verified that the export functionality works for both notes and
tasks, whether exporting immediately after opening the editor or after
editing.
- [x] Ensured the export button appears in the action menu only when the
object is a note/task.
- [x] Ensured the export button appears in the
RightDrawerActionMenuDropdown for a note/task.
## Notes
- The code already supports exporting to Word, but only PDF export is
currently available. To enable Word export, we just need a UI option
allowing users to choose between PDF and Word.
- After upgrading the Blocknote packages to the latest version,
dependency conflicts arose with tiptap and prosemirror-model. To address
this, all tiptap dependencies were consolidated in the root
package.json, and a resolution was added for prosemirror-model. Also,
some methods in CustomAddBlockItem.tsx were missing in the newer
version, so I updated the code to accommodate these changes.
- Exporting a note with an image works only if the image is embedded, as
Blocknote doesn’t support actual image uploads. Uploaded images are
omitted in the PDF export, while the text is retained.
---------
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
Co-authored-by: Félix Malfait <felix@twenty.com>
## Description:
This pull request includes the following changes:
1. **Dependency Update**:
- Added `@xyflow/react` as a dependency.
- Replaced imports from `reactflow` with `@xyflow/react` in multiple
components.
2. **Dependency Removal**:
- Removed `reactflow` dependency and its related code from the project.
3. **Type Definitions Update**:
- Updated type definitions for nodes and edges to align with the new
library.
4. **Code Refactoring**:
- Minor refactoring for improved code clarity and consistency in the
following components:
- `SettingsDataModelOverview`
- `SettingsDataModelOverviewEffect`
- `SettingsDataModelOverviewField`
- `SettingsDataModelOverviewObject`
5. **Dependency Files Update**:
- Updated `package.json` and `yarn.lock` to reflect the changes in
dependencies.
## Additional Notes:
- These changes ensure that the project is now using the `@xyflow/react`
library instead of `reactflow`.
- The refactoring improves code readability and maintains consistency
across the components.
- Please review the changes and provide any feedback or suggestions.
## Testing:
- The changes have been tested locally and verified to work as expected.
## Checklist:
- [x] Added `@xyflow/react` as a dependency.
- [x] Replaced `reactflow` imports with `@xyflow/react`.
- [x] Removed `reactflow` dependency.
- [x] Updated type definitions for nodes and edges.
- [x] Refactored components for improved clarity and consistency.
- [x] Updated `package.json` and `yarn.lock`.
- [x] Tested the changes locally.
## Related Issue
Fixes#6662
**TLDR**
Added Billing Entitlement table, based on stripe
customer.ActiveEntitlements webhook event. In this table it has a key
value pair with each key being the stripe feature lookup key and the
value a boolean. We use this table in order to see if SSO or other
feaures are enabled by workspace.
**In order to test: twenty-server**
Billing:
- Set IS_BILLING_ENABLED to true
- Add your BILLING_STRIPE_SECRET and BILLING_STRIPE_API_KEY
- Add your BILLING_STRIPE_BASE_PLAN_PRODUCT_ID (use the one in testMode
> Base Plan)
Auth:
- Set AUTH_SSO_ENABLED to true
- Set your ACCESS_TOKEN_SECRET, LOGIN_TOKEN_SECRET, REFRESH_TOKEN_SECRET
and FILE_TOKEN_SECRET
- Set IS_SSO_ENABLED feature flag to true
Stripe Webhook:
- Authenticate with your account in the stripe CLI
- Run the command: stripe listen --forward-to
http://localhost:3000/billing/webhooks
Migration:
- npx nx typeorm -- migration:run -d
src/database/typeorm/core/core.datasource.ts
**In order to test: twenty site**
- Buy a subscription (you can use the card 4242...42 with expiration
date later in the future)
- Go to SSO and create an OICD subscription
- Change the value in the entitlement table in order to put it in false
- An error should occur saying that the current workspace has no
entitlement
**Considerations**
The data from the Entitlement table is updated based on the stripe
webhook responses, and we use the customerActiveEntitlemet response to
update the info on the table, however this event doesnt have the
metadata containing the workspaceId. Because we cannot control at wich
order the webhook send events, we force a server error if the
entitlements are updated before the BillingSubscription. Stripe resends
the event based on a exponential backoff (for more info see
https://docs.stripe.com/webhooks#retries ) because we are in test mode
Stripe retries three times over a few hours. So if the
BillingEntitlement is not updated it is completely normal and it will be
updated when stripe resends the event.
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
Implemented:
* Account Connect
* Calendar sync via delta ids then requesting single events
I think I would split the messaging part into a second pr - that's a
step more complex then the calendar :)
---------
Co-authored-by: bosiraphael <raphael.bosi@gmail.com>
#### Description
This PR resolves issue #7903 regarding the Storybook configuration for
Windows development environments. Previously, the configuration script
generated forward slashes instead of backslashes, leading to errors when
running the command `npx nx run twenty-front:storybook:serve:dev
--configuration=modules` on Windows systems.
#### Changes Made
- Updated the Storybook configuration to ensure that backslashes are
used in file paths for Windows environments, preventing command
execution errors.
#### How to Test
1. **Run Storybook Command**:
- On a Windows machine, execute the command:
```
npx nx run twenty-front:storybook:serve:dev --configuration=modules
```
- Ensure that the command runs successfully without any path-related
errors.
2. **Verify Configuration**:
- Check the Storybook configuration files to confirm that paths are
using backslashes where applicable.
- Test the same command on non-Windows environments to verify that there
are no regressions.
#### Related Issue
- Fixes#7903
#7346#7343#7342#7344
Before:
<img width="799" alt="Screenshot 2024-10-08 at 11 59 37"
src="https://github.com/user-attachments/assets/a1cd1714-41ed-4f96-85eb-2861e7a8b2c2">
Now:
In order to test:
1. Set ANALYTICS_ENABLED to true
2. Set TINYBIRD_TOKEN to your token from the workspace
_twenty_analytics_playground_
3. Write your client tinybird token in
SettingsDeveloppersWebhookDetail.tsx in line 93
4. Create a Webhook in twenty and set wich events it needs to track
5. Run twenty-worker in order to make the webhooks work.
6. Do your tasks in order to populate the data
7. Enter to settings> webhook>your webhook and the statistics section
should be displayed.
Solves issue #5917.
This PR is now ready for the first review!
Filters do not fully work yet, there's a problem applying multiple
filters like the following:
```
{
and: [
{
[correspondingField.name]: {
gte: start.toISOString(),
} as DateFilter,
},
{
[correspondingField.name]: {
lte: end.toISOString(),
} as DateFilter,
},
],
}
```
I'll do my best to dig into it tonight!
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
Issue #6976
@FelixMalfait
I could not do
```
import { Banner } from 'twenty-ui';
const StyledBanner = styled(Banner)
display: flex;
align-items: center;
padding: ${({ theme }) => theme.spacing(8)};
position: absolute;
border-radius: 8px;
&:hover {
background-color: ${({ theme }) => theme.accent.primary};
}
;
```
The styles wont get overridden for Banner, so for now I styled a new
banner in `UnmatchColumnBanner` which is inconsistent.
I couldnt figure out why css properties are not being overridden, need
help!
@Bonapara
Question -
Should the click work on entire banner or just cheveron? For now it just
on cheveron click.
https://github.com/user-attachments/assets/0f409e78-a341-4f26-af74-117e4b2775a9
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
- add layer for lambda execution
- add layer for local execution
- add package resolve for the monaco editor
- add route to get installed package for serverless functions
- add layer versioning
Website CD has been broken by the recent addition of typeorm patch in
root package.json
Our current vision is to add npm package to each twenty-package
package.json directly
Continuation of #6644
Now chromium browser is used in workspaces tests instead of firefox and
screenshots after each test are properly saved in one folder when run
from IDE and from terminal using `yarn test:e2e` command
Fixes (#6643)
- According to `aws-sdk` v3, each service is packaged as a separate
module, and the codebase uses all of the required AWS services
accordingly. Therefore, removing the direct dependency on `aws-sdk:v2`
to resolve the warning shown in (#6643)
Co-authored-by: Charles Bochet <charles@twenty.com>
