Creating manual chunk was a bad idea, we should always solve lazy
loading problem at the source instance.
Setting a 4.5MB for the index bundle size, CI will fail if we go above.
There is still a lot of room for optimizations!
- More agressive lazy loading (e.g. xyflow and tiptap are still loaded
in index!)
- Add a prefetch mechanism
- Add stronger CI checks to make sure libraries we've set asides are not
added back
- Fix AllIcons component with does not work as intended (loaded on
initial load)
This PR fixes an infinite loop that was appearing on IconPicker, since
it was about setting and unsetting the hotkey scope, it wasn't really
noticeable.
The direct cause was using the mouse enter and mouse leave events to set
and unset the hotkey scope, without using a local state to prevent race
condition, so this PR just adds this local state.
Fixes https://github.com/twentyhq/twenty/issues/12344
Small optimization for faster loading (gaining ~80ms - average time of a
click)
It might seem a little over-engineered but there are a lot of edge cases
and I couldn't find a simpler solution
I also tried to tackle Link Chips but it's more complex so this will be
for another PR
This PR refactors all the dropdown content wrapping mechanism across the
entire app.
It refactors the internals of the `Dropdown` component and introduces a
new generic `DropdownContent` component that is a generic wrapper used
for each dropdown.
## Why this PR ?
Because we’ve been experiencing continuous regressions for months on the
dropdown content width, with weird scrolling behaviors in some and not
in others, and every time a solution was found for a particular set of
dropdowns, it broke another set of dropdowns, which wasn’t noticed
because doing the QA of all dropdowns of the app is very difficult for
fixing an apparently small bug.
## Don’t we already have a `DropdownMenu` component ?
Indeed, this new `DropdownContent` is almost like `DropdownMenu` and
took inspiration from it but `DropdownContent` acts as a generic content
container that sets the width of the whole dropdown, whether we have a
menu or not.
## Why don’t we put it directly in Dropdown internals ?
Because the Dropdown component is using a complex logic with floating-ui
middleware to compute its position and size, and for this logic to work
correctly, it cannot be responsible for the “wanted” width of its
content, because the children components, which the dropdown is not
aware of, can request different widths after the dropdown has been
mounted.
A good example with multiple use cases inside the same dropdown can be
found in `AdvancedFilterDropdownFilterInput`
Thus, it is the responsibility of the content of the dropdown to
determine the width it wants to have.
## What is the difference with DropdownMenuItemsContainer ?
We can have multiple `DropdownMenuItemsContainer` in a dropdown,
alongside other components like `DropdownMenuSeparator` or
`DropdownMenuHeader`, and each of those components behaves differently
regarding to its width, paddings, etc. Therefore it is logical that the
`DropdownMenuItemsContainer` cannot be responsible for the whole
dropdown content width, and trying to do so has been the cause of many
regressions for months.
Now `DropdownMenuItemsContainer` is taking a width of `auto` by default,
which is the best to adapt to a parent which has a defined width.
## How do I set the width of my dropdown now ?
By passing a pixel width to the props `widthInPixels` of
`DropdownContent`, which only accepts numbers to avoid any confusion
with `auto` , `100%` or `160px` and other specific width variables.
The `dropdownWidth` props has been removed from `<Dropdown>` to avoid
any confusion.
Also the `DropdownMenuItemsContainer` is now using `auto` as its default
width to fill the available space inside `DropdownContent` .
It is highly recommended to use the enum `GenericDropdownContentWidt` to
define your width.
## Where to use this new `DropdownContent` component ?
There are two main use cases.
If the dropdown content is defined directly inline in the Dropdown
props, then it is recommended to use it here too.
On the other hand if the dropdown content is abstracted in another
component, it’s recommended to use this new component alongside the
others components like `DropdownMenuItemsContainer`.
A good rule of thumb is to place `DropdownContent` where
`DropdownMenuItemsContainer`, `DropdownMenuSearchInput`, etc. are
placed.
## What if I have a custom width ?
Just define a constant like `ICON_PICKER_DROPDOWN_CONTENT_WIDTH` and use
it with the props `widthInPixels` .
Otherwise there’s a `GenericDropdownContentWidth` enum. The default
value being `GenericDropdownContentWidth.Medium` (or 200px), which most
dropdowns use.
## QA
Component | Comment
-- | --
AttachmentDropdown | Fixed overflowing (thanks to DropdownContent)
RecordIndexActionMenuDropdown |
CommandMenuActionMenuDropdown |
SupportDropdown | Fixed overflowing (thanks to DropdownContent)
MessageThreadSubscribersDropdownButton | Removed because unused
FavoriteFolderNavigationDrawerItemDropdown | Set width at Narrow
FavoriteFolderPicker |
ViewPickerOptionDropdown |
PageFavoriteFolderDropdown | Removed because unused
AdvancedFilterAddFilterRuleSelect |
AdvancedFilterAddFilterRuleSelect |
AdvancedFilterFieldSelectMenu |
AdvancedFilterRecordFilterGroupOptionsDropdown |
AdvancedFilterRecordFilterOperanceSelect | Set width at Narrow
AdvancedFilterLogicalOperatorDropdown | Set width at Narrow
AdvancedFilterRecordFilterOptionsDropdown |
AdvancedFilterRootRecordFilterGroup | Fixed broken horizontal scrolling
behavior
AdvancedFilterSubFieldSelectMenu |
AdvancedFilterDropdownFilterInput |
ObjectFilterDropdownBooleanSelect |
ObjectFilterDropdownCountrySelect | Fixed broken menu items container
ObjectFilterDropdownCurrencySelect | Set width to Large
ObjectFilterDropdownFilterInput |
ObjectFilterDropdownOperandDropdown | Fixed width that was not fixed
ObjectFilterDropdownFilterInput | Fixed width that wasn’t the same for
EditableFilterChip
ObjectFilterDropdownOperandSelect | Refactored
ObjectOptionsDropdownRecordGroupFieldsContent | Added missing separator
ObjectOptionDropdownFieldsContent |
ObjectOptionsDropdownHiddenFieldsContent |
ObjectOptionsDropdownLayoutContent |
ObjectOptionsDropdownLayoutOpenInContent |
ObjectOptionsDropdownMenuContent |
ObjectOptionsDropdownRecordGroupFieldsContent |
ObjectOptionsDropdownRecordGroupsContent |
ObjectOptionsDropdownRecordGroupSortContent |
ObjectOptionsDropdownHiddenRecordGroupsContent | Removed unnecessary
DropdownMenuItemsContainer
RecordBoardColumnHeaderAggregateDropdown | Fixed overflowing (thanks to
DropdownContent)
RecordBoardColumnHeaderAggregateDropdownFieldsContent | Fixed
overflowing (thanks to DropdownContent)
RecordBoardColumnHeaderAggregateDropdownMenuContent | Fixed overflowing
(thanks to DropdownContent)
RecordBoardColumnHeaderAggregateDropdownOptionsContent | Fixed
overflowing (thanks to DropdownContent)
MultiItemFieldInput | Fixed overflowing (thanks to DropdownContent)
MultiItemFieldMenuItem |
MultipleRecordPicker | Fixed overflowing (thanks to DropdownContent)
SingleRecordPicker |
RecordTableColumnAggregateDropdownSubmenuContent |
RecordTableColumnAggregateFooterMenuContent |
RecordTableColumnHeadDropdownMenu | Fixed overflowing (thanks to
DropdownContent)
RecordTableHeaderPlusButtonContent |
MultipleSelectDropdown | Broken width fixed
ObjectSortDropdownButton |
RecordDetailRelationRecordsListItem |
ConfigVariableDatabaseInput |
ConfigVariableOptionsDropdownContent |
SettingsObjectFieldActiveActionDropdown | Fixed overflowing (thanks to
DropdownContent)
SettingsObjectFieldDisabledActionDropdown | Set width at Narrow
SettingsObjectSummaryCard | Removed because unused
SettingsDataModelFieldSelectFormOptionRow |
SettingsDataModelNewFieldBreadcrumbDropdown |
SettingsObjectInactiveMenuDropDown |
SettingsRoleAssignementWorkspaceMemberPickerDropdown |
SettingsRolePermissionObjectLevelObjectPickerDropdownContent |
SettingsSecurityApprovedAccessDomainRowDropdownMenu | Couldn’t test
SettingsSecuritySSORowDropdownMenu | Couldn’t test
SettingsAccountsRowDropdownMenu | Fixed overflowing (thanks to
DropdownContent)
SettingsIntegrationDatabaseConnectionSummaryCard | Couldn’t test
SettingsServerlessFunctionTablEnvironmentVariableTableRow | Deactivated
scope
MatchColumnSelectFieldSelectDropdownContent | Removed now unnecessary
width on DropdownMenuItemsContainer
MatchColumnSelectSubFieldSelectDropdownContent |
SubMatchingSelectInput |
CurrencyPickerDropdownSelect |
IconPicker | Fixed overflowing (thanks to DropdownContent)
PhoneCountryPickerDropdownSelect |
Select | Refactored to drilldown wanted width of content, in this case
it’s intended
ExpandedListDropdown |
ShowPageAddButton | Removed because unused
MultiWorkspaceDropdownDefaultComponent |
MultiWorkspaceDropdownThemesComponent |
MultiWorkspaceDropdownWorkspacesListComponent |
AdvancedFilterDropdownButton |
EditableFilterChip |
EditableFilterDropdownButton |
UpdateViewButtonGroup |
ViewBarFilterDropdown |
ViewBarFilterDropdownFieldSelectMenu |
ViewPickerContentCreateMode |
ViewPickerContentEditMode |
ViewPickerListContent |
WorkflowEditTriggerDatabaseEventForm |
WorkflowVariablesDropdownFieldItems |
WorkflowVariablesDropdownObjectItems |
WorkflowVariablesDropdownWorkflowStepItems |
CommandMenuContextChipGroups |
RecordBoardColumnDropdownMenu |
MultiSelectInput |
SelectInput |
CustomSlashMenu |
DropdownMenu | Removed and replaced by DropdownContent
OverlayContainer and around |
<!-- notionvc: 1e23bdb8-2dda-4f8d-a64d-ecc829a768a2 -->
## Miscellaneous
Side notes :
- The `Select` component is now wrapping the `DropdownContent` because
it computes a dynamic width.
- The advanced filter dropdown has been fixed, it was broken when
resizing the window horizontally, we couldn’t scroll. This specific edge
case was taken into account when refactoring the whole dropdown content
system
- As discussed with Nitin, data-select-disable will probably be removed
entirely, so I let it as is, because right now it is not used by the
refactored d&d selection.
- Duplicate separators under DropdownMenuHeader have been removed.
Fixes : https://github.com/twentyhq/twenty/issues/12327
Fixes : https://github.com/twentyhq/core-team-issues/issues/951
closes#12309
Fixes input elements becoming unusable due to drag selection preventing
default browser behavior.
**Problem:**
- Input elements couldn't receive focus because `event.preventDefault()`
was called unconditionally
- Removing `preventDefault()` broke click-outside-to-deselect
functionality
**Solution:**
- Only call `preventDefault()` when actually starting drag selection
- Preserves input focus while maintaining drag selection and deselection
behavior
**Changes:**
- Move `event.preventDefault()` inside the `shouldStartSelecting`
condition
- Update test to reflect correct behavior for disabled elements
Fixes#12093
This bug was quite hard to fix because it was an issue with the
`AnimatePresence` component of the framer motion library.
After investigating the issue with @Devessier, here is what we
understood:
Since the modal component has an exit animation but wasn't wrapped
inside an `AnimatePresence` component, the animation seemed to never be
marked as complete when we closed the modal and the component did not
appear anymore but was still in the dom.
This caused an issue when closing the side panel because the state
cleanup function of the command menu is triggered when its closing
animation is complete. This cleanup function emits a right drawer close
event, which is listened by the record table row to update it's state.
The `onExitComplete` was never triggered because the exit animation of
the modal was never considered as complete, and since it's a children
animation of the command menu `AnimatePresence`, this animation was
never considered as complete either (see [PresenceChild
doc](https://github.com/motiondivision/motion/blob/main/packages/framer-motion/src/components/AnimatePresence/PresenceChild.tsx).
This caused the cleanup function to never be executed and the close
event to never be emitted, so the row stayed active.
Before:
https://github.com/user-attachments/assets/a165039b-6203-43d6-b992-dcfb4dfb8f2b
After:
https://github.com/user-attachments/assets/42eab2e8-62c9-4c25-85d6-78210d7ebe89
This PR has several objectives:
- Ignore invalid and empty links in the frontend
- Ignore empty links when creating or updating a link field in the
backend
- Throw an error when trying to create or update a link field with an
invalid link
The logic is mostly the same in the frontend and the backend: we take
the initial primaryLink and the secondaryLinks, we discard all the empty
links (with `url === '' || url === null`), and the primaryLink becomes
the first remaining link.
## Frontend
There are three parts in the frontend where we have to remove the empty
links:
- LinksDisplay
- LinksFieldInput
- isFieldValueEmpty; used in RecordInlineCell
## Backend
I put the logic in
`packages/twenty-server/src/engine/core-modules/record-transformer/services/record-input-transformer.service.ts`
as it's used by the REST API, the GraphQL API, and by Create Record and
Update Record actions in the workflows.
We previously used classnames to exclude elements from the click outside
listener.
With this PR we can now use `data-click-outside-id` instead of
`classNames` to target the elements we want to exclude from the click
outside listener.
We can also add `data-globally-prevent-click-outside` to a component to
globally prevent triggering click outside listeners for other
components. This attribute is especially useful for confirmation modals
and snackbar items.
Fixes#11785:
https://github.com/user-attachments/assets/318baa7e-0f82-4e3a-a447-bf981328462d
Fixes https://github.com/twentyhq/twenty/issues/11566 + translates dates
- Date display bug: We had an issue with date (not date time) display
depending on the timezone the user had selected. The date is stored in
the db as yyyy-mm-dd, eg. 2025-05-01 for **May 1st, 2025**. When
returned this date is formatted in a UTC DateTime at midnight, so
2025-05-1 00:00:00. Then when displaying the date we were converting
this date using the timeZone, so 2025-04-30 17:00:00, thus displaying
**April 30th, 2025**. The fix chosen is that we should not take into
account the timezone for date (not date time!) displays as we always
want to show the same date.
- Date translation: dates were not translated, not in their default
display (_May 1st, 2025_) nor in their relative display (_about a month
ago_). The lib we use for date formatting, date-fns, offers a
translation option with pre-built `Locale`s from their lib.
Unfortunately and surprisingly we cannot just use directly string locale
codes (like `fr-FR`), cf [open issue on
date-fns](https://github.com/date-fns/date-fns/issues/3660). A util was
introduced to offset this by dynamically importing the right date-fns
Locale based on the locale code.
Fixes https://github.com/twentyhq/core-team-issues/issues/950
This issue was due to the memoization inside `useIsMatchingLocation`,
which was rerendered only if the pathname changed but not the search
params.
After discussion with @lucasbordeau, we decided to remove the hook
`useIsMatchingLocation` and to create an equivalent util function which
takes the location as an argument.
---------
Co-authored-by: Lucas Bordeau <bordeau.lucas@gmail.com>
# Introduce focus stack to handle hotkeys
This PR introduces a focus stack to track the order in which the
elements are focused:
- Each focused element has a unique focus id
- When an element is focused, it is pushed on top of the stack
- When an element loses focus, we remove it from the stack
This focus stack is then used to determine which hotkeys are available.
The previous implementation lead to many regressions because of race
conditions, of wrong order of open and close operations and by
overwriting previous states. This implementation should be way more
robust than the previous one.
The new api can be incrementally implemented since it preserves
backwards compatibility by writing to the old hotkey scopes states.
For now, it has been implemented on the modal components.
To test this PR, verify that the shortcuts still work correctly,
especially for the modal components.
This pull request introduces changes to improve handling of nullable
values in link-related data structures and simplifies field value
generation logic. Key updates include adjustments to type definitions,
utility functions, and component logic to support `null` values for
links, along with the removal of the `generateDefaultFieldValue`
function in favor of `generateEmptyFieldValue`.
There will be a few more follow-up Pull Requests.
---
Closes https://github.com/twentyhq/twenty/issues/11844
In this PR:
- deprecating listenClickOutside ComparePixel mode as this is not
accurate. We were using to avoid portal issue with CompareHtmlRef mode
but this is still an issue when portalled content overflows the
container.
- add ClickOutsideContext to specify excluded className so portal
children can use it easily (part of the tooling)
- fix stories
- remove avoidPortal from dropdown as this was not used
Fixes https://github.com/twentyhq/twenty/issues/12111
The bug occurred because in
https://github.com/twentyhq/twenty/pull/12062, I changed the click
outside mode of the modal from compare pixels to compare html ref. This
happens because the modal is in a portal, so the `compareHTMLRef`
doesn't work.
A bug already existed before but since the mode was compare pixel, it
only happened when a dropdown was overflowing from the modal:
https://github.com/user-attachments/assets/e34bfaca-dd21-46e5-a532-a66ba494889d
I commented the tests `CancelButtonClick`, and `ConfirmButtonClick`
because they don't work with compare pixel mode (the `userEvent.click()`
creates a `MouseEvent` with `clientX`=0 and `clientY`=0 so it triggers
the click outside listener even when the story tiggers a click on an
element inside a modal)
We should find a way to make the ClickOutsideMode `compareHTMLRef` work
with portals. I believe the `comparePixels` mode was used as a hacky way
to get around this problem (hacky because of the existing bug above).
# Modal API Refactoring
This PR refactors the modal system to use an imperative approach for
setting hotkey scopes, addressing race conditions that occurred with the
previous effect-based implementation.
Fixes#11986Closes#12087
## Key Changes:
- **New Modal API**: Introduced a `useModal` hook with `openModal`,
`closeModal`, and `toggleModal` functions, similar to the existing
dropdown API
- **Modal Identification**: Added a `modalId` prop to uniquely identify
modals
- **State Management**: Introduced `isModalOpenedComponentState` and
removed individual boolean state atoms (like
`isRemoveSortingModalOpenState`)
- **Modal Constants**: Added consistent modal ID constants (e.g.,
`FavoriteFolderDeleteModalId`, `RecordIndexRemoveSortingModalId`) for
better maintainability
- **Mount Effects**: Created mount effect components (like
`AuthModalMountEffect`) to handle initial modal opening where needed
## Implementation Details:
- Modified `Modal` and `ConfirmationModal` components to accept the new
`modalId` prop
- Added a component-state-based approach using
`ModalComponentInstanceContext` to track modal state
- Introduced imperative modal handlers that properly manage hotkey
scopes
- Components like `ActionModal` and `AttachmentList` now use the new
`useModal` hook for better control over modal state
## Benefits:
- **Race Condition Prevention**: Hotkey scopes are now set imperatively,
eliminating race conditions
- **Consistent API**: Modal and dropdown now share similar patterns,
improving developer experience
## Tests to do before merging:
1. Action Modals (Modal triggered by an action, for example the delete
action)
2. Auth Modal (`AuthModal.tsx` and `AuthModalMountEffect.tsx`)
- Test that auth modal opens automatically on mount
- Verify authentication flow works properly
3. Email Verification Sent Modal (in `SignInUp.tsx`)
- Verify this modal displays correctly
4. Attachment Preview Modal (in `AttachmentList.tsx`)
- Test opening preview modal by clicking on attachments
- Verify close, download functionality works
- Test modal navigation and interactions
5. Favorite Folder Delete Modal (`CurrentWorkspaceMemberFavorites.tsx`)
- Test deletion confirmation flow
- Check that modal opens when attempting to delete folders with
favorites
6. Record Board Remove Sorting Modal (`RecordBoard.tsx` using
`RecordIndexRemoveSortingModalId`)
- Test that modal appears when trying to drag records with sorting
enabled
- Verify sorting removal works correctly
7. Record Group Reorder Confirmation Modal
(`RecordGroupReorderConfirmationModal.tsx`)
- Test group reordering with sorting enabled
- Verify confirmation modal properly handles sorting removal
8. Confirmation Modal (base component used by several modals)
- Test all variants with different confirmation options
For each modal, verify:
- Opening/closing behavior
- Hotkey support (Esc to close, Enter to confirm where applicable)
- Click outside behavior
- Proper z-index stacking
- Any modal-specific functionality
This PR adds what's needed to filter on the ADDRESS sub-fields, notably
the country sub-field, that requires a country multi select component,
which was created in this PR (ObjectFilterDropdownCountrySelect)
This PR refactors the common logic between advanced filter dropdown
field selection logic and view bar filter dropdown field selection
logic, notably in useFilterDropdownSelectableFieldMetadataItems.
There are now new components to identify clearly what's tied to view bar
or advanced filter, it could be further simplified or factorized, but as
it is right now, it's simple enough to be maintained easily even if a
little bit too verbose, which is often the best trade-off we should aim
for.
Improvements :
- Added the CompositeFieldSubFieldName where needed
- Fixes bug in advanced filter dropdown input
- Fixes dropdown content width bug in advanced filter dropdown input
- Fixes a bug when inputing a Currency filter without a sub-field in
view bar filter dropdown
- Used DropdownMenuSearchInput instead of a custom StyledInput which was
doing exactly the same thing
- Factorized the state setting logic in
useSetAdvancedFilterDropdownStates in an anonymous function
setAdvancedFilterDropdownStates
- Created useSelectFilterFromViewBarFilterDropdown hook to have a more
meaningful and clear logic to abstract what happens when we select a
field to filter in the view bard field select dropdown
- Fixes a bug with advanced filter operand dropdown select which wasn't
modifying the current record filter and creating a stale state.
Fixes https://github.com/twentyhq/core-team-issues/issues/612
# Note link's color contrast fixed in dark mode
## Key changes
This pull request introduces a minor styling update to the `BlockEditor`
component in `BlockEditor.tsx`. It adds a new style rule to ensure
inline links within the `.bn-inline-content` class are styled with the
theme's blue color.
### Styling updates:
*
[`packages/twenty-front/src/modules/ui/input/editor/components/BlockEditor.tsx`](diffhunk://#diff-4a66ce7d5588bddc6237ac1a3b2949fe4432182bd357114294e8a79d98afce51R119-R122):
Added a CSS rule to style links (`<a>` elements) within
`.bn-inline-content` to use the theme's blue color.
## Issue
fixes#11917
After reading the blocknote documentation :
- we decided to increase to 100% the lines width
- we decided to reduce as much as possible inner padding
- we decided it's on the parent to decide the padding of the richtext
The two last points are recommended in a discussion on the project
blocknote. This way clicking on padding won't trigger weird behaviour on
Chrome.
Fixes
https://github.com/twentyhq/core-team-issues/issues/827#issuecomment-2842350359
- enrich response so the record is available in the step output. Today
this is available in the schema but only the id is set
- make the full record picker clickable instead of the arrow only
<img width="467" alt="Capture d’écran 2025-04-30 à 16 08 04"
src="https://github.com/user-attachments/assets/db74b9a6-7f1d-4e54-bf06-9be3d67ee398"
/>
This PR refactors the generic module object dropdown filter input.
We have multiple components for each filter type and each one was using
selectedFilterState and the applyRecordFilter hook to read and set its
value.
The main issue was that each component was forced to pass every property
of a RecordFilter to applyRecordFilter to only modify the value
property, thus creating a lot of unnecessary dependencies and tight
coupling between every component and hook that used the record filters.
Now we have each component only reading from a new
objectFilterDropdownCurrentRecordFilterComponentState, scoped to a
ObjectFilterDropdownComponentInstanceContext, thus whether we're in a
view bar dropdown, an editable filter chip dropdown or an advanced
filter dropdown, we know where to read the filter value from.
This component state might even be simplified by only storing the record
filter id, thus avoiding having to synchronize this state with its
counterpart in currentRecordFilterComponentState, but we should try
after the main refactor effort, as those two states aren't in the same
instance context.
We implement a new applyObjectFilterDropdownFilterValue hook to handle
the value setting from an object filter dropdown input component.
There's also a new useApplyObjectFilterDropdownOperand for doing the
same but for operand.
Another important thing that had to be done to keep a synchronous code
path was to set the states of each advanced filter row at the advanced
filter dropdown onOpen event, using useSetAdvancedFilterDropdownStates.
Finally we remove : useApplyRecordFilter, useSelectFilterUsedInDropdown
and selectedFilterComponentState which were making all of this zone
difficult to work with.
Closes https://github.com/twentyhq/core-team-issues/issues/718
Closes https://github.com/twentyhq/core-team-issues/issues/720
This PR is refactoring a part of the ongoing filter refactor that was
blocking other refactor in that area.
Precisely, the dropdown filter that was used with the editable filter
chip was initialized by two conflicting useEffect, causing many unwanted
and hard to tackle bugs when modifying other places in the code that
used the same dropdown.
We also remove a difficult to maintain pattern around
onToggleColumnFilterComponentState, which was storing a click handler in
a state, we want to avoid this pattern.
The hook useHandleToggleColumnFilter is also removed and replaced by
useOpenRecordFilterChipFromTableHeader.
The code is now synchronous and starts from the user click event that is
triggered on a table cell header filter button click.
Also :
- Created a useSetEditableFilterChipDropdownStates that allows to
separate the code path of filter chip dropdown from the code path of
view bar global filter dropdown (will be continued in another refactor)
- Added useCreateEmptyFilterFromFieldMetadataItem to abstract empty
filter creation when opening a filter dropdown (will be used for other
refactor)
- Created a useOpenDropdownFromOutside hook that will also be used for
other refactor on filter
- Deleted EditableFilterDropdownButtonEffect
- Removed call to ViewBarFilterEffect (will be completely removed in
other refactors)
This PR implements sub-field filtering on CURRENCY field type and
improves many related zones.
- Created a ObjectFilterDropdownCurrencySelect dropdown component for
filtering on multiple currencies
- Added currencyCode sub-field to CurrencyFilter type
- Created getDefaultSubFieldNameForCompositeFilterableFieldType to avoid
situation where we don't have any sub field name in sub field filtering
situations.
- Implemented filtering for currencyCode in
computeFilterRecordGqlOperationFilter
- Implemented CURRENCY type in getRecordFilterOperands
- Implemented isMatchingCurrencyFilter for using in
isRecordMatchingFilter for proper optimistic rendering
- Created turnCurrencyIntoSelectableItem to help
ObjectFilterDropdownCurrencySelect
Testing :
- Added test for currency sub fields in getOperandsForFilterType
- Completely reworked isMatchingCurrencyFilter test
Improvements :
- Created a unique CURRENCIES constant to avoid re-creating it at
various places
- Derive the type FilterableFieldType from a constant array
FILTERABLE_FIELD_TYPES, so it's easier to work with
- Added areCompositeTypeSubFieldsFilterable
- Fixed a bug with empty value '[]' that was preventing the auto-removal
of a filter chip
Miscellaneous :
- Created isExpectedSubFieldName util to do a type-safe check of a
subFieldName
- Better naming : renamed isCompositeField to isCompositeFieldType
- Created isCompositeTypeFilterableWithAny to specify which field types
are filterable by any sub field
- Better naming : renamed
ObjectFilterDropdownFilterSelectCompositeFieldSubMenu to
ObjectFilterDropdownSubFieldSelect
- Better naming : renamed ObjectFilterDropdownFilterSelect to
ObjectFilterDropdownFieldSelect
- Created isEmptinessOperand util instead of duplicating the same
hard-coded check in multiple places
- Better naming : used subFieldName instead of compositeFieldName for
consistency
- UseEffect removal : removed unnecessary useEffect in
MultipleSelectDropdown
Fixes a bug where Empty and Not weren't appearing in filter chip in
particular cases
Fixes https://github.com/twentyhq/core-team-issues/issues/498
Fixes https://github.com/twentyhq/twenty/issues/7558
# Ability to navigate dropdown menus with keyboard
The aim of this PR is to improve accessibility by allowing the user to
navigate inside the dropdown menus with the keyboard.
This PR refactors the `SelectableList` and `SelectableListItem`
components to move the Enter event handling responsibility from
`SelectableList` to the individual `SelectableListItem` components.
Closes [512](https://github.com/twentyhq/core-team-issues/issues/512)
## Key Changes:
- All dropdowns are now navigable with arrow keys
## Technical Implementation:
- Each `SelectableListItem` now has direct access to its own `Enter` key
handler, improving component encapsulation
- Removed the central `Enter` key handler logic from `SelectableList`
- Added `SelectableList` and `SelectableListItem` to all `Dropdown`
components inside the app
- Updated all component implementations to adapt to the new pattern:
- Action menu components (`ActionDropdownItem`, `ActionListItem`)
- Command menu components
- Object filter, sort and options dropdowns
- Record picker components
- Select components
---------
Co-authored-by: Lucas Bordeau <bordeau.lucas@gmail.com>
Now the source of truth for the version is set during the build process.
We set it as an environment variable from the tags.
We could add it back to the package.json during the build process (from
the git tag), but there is not use for it at the moment since it's not
npm packages.
## Introduction
This PR enables functionality discussed in [Layout Date
Formatting](https://github.com/twentyhq/core-team-issues/issues/97).
### TLDR;
It enables greater control of date formatting at the object's field
level by upgrading all DATE and DATE_TIME fields' settings from:
```ts
{
displayAsRelativeDate: boolean
}
```
to:
```ts
type FieldDateDisplayFormat = 'full_date' | 'relative_date' | 'date' | 'time' | 'year' | 'custom'
{
displayFormat: FieldDateDisplayFormat
}
```
PR also includes an upgrade command that will update any existing DATE
and DATE_TIME fields to the new settings value
---------
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
Co-authored-by: Félix Malfait <felix@twenty.com>
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
As per title:
- waitFor is a loop that waits for a condition to be filled, it should
be use to expect or in rare case to wait for element to be present in
the page (in most cases, you can use findByXXX)
- user actions should not be in this loop, otherwise they will be
triggered multiple times
Recoil-sync was causing issues with Firefox, replacing it with a simpler
mechanism to hydrate variables on page load
---------
Co-authored-by: etiennejouan <jouan.etienne@gmail.com>
In this PR:
- Remove SignUpLoading blank screen by an empty dark overlay =>
VerifyEffect
- Add ModalContent from pages themselves instead of using it the Layout.
This allow for empty dark overlay without showing an empty modal with
padding
